Tenders Are Invited For Reconstruction And Expansion Of The Existing Recyclable Raw Materials Hall With A Ch ... in Poland

Work Detail

The Subject Of The Order Are Construction Works Consisting In The Comprehensive Reconstruction And Expansion Of The Existing Recyclable Raw Materials Hall Along With The Change Of Use Into A Production And Storage Hall With Dimensions Of Approximately 55 X 20 And An Area Of ​​Approximately 1,100 M2. After The Reconstruction, A Repair And Reuse Point Will Be Located In The Hall After The Reconstruction, Along With A Point For Exchanging Used Items (Not Waste) With An Area Of Approx. 33.05 M2. Eaves Height = 8.89 M Above Ground Level. Roof Ridge Height = 12.86 M Above Ground Level. Hall Structure - Steel. Structural Elements:• Columns Made Of Steel Profiles With Spacing In Accordance With The Technical Design• Solid Steel Girders• Vertical Bar Bracings• Wall Transoms Made Of Rk Closed Profiles• Roof Purlins In A Transverse Arrangement, Made Of Z+ Sections; Horizontal Beams, Vertical Braces In The Plane Of The Columns And Horizontal In The Plane Of The Roof. Roof Covering Made Of Thick Sandwich Panels. 20 Cm, Faced On Both Sides With Trapezoidal Sheet Metal On Steel Battens. The Roof Has Skylights Measuring 1.05 X 3.0 M And Smoke Vents Measuring 3.0 X 3.0 M. The Casing Is Made Of A Thick Sandwich Panel. 15 Cm, Trapezoidal Sheet Faced On Both Sides, Attached To Steel Transoms. Industrial Concrete Floor With A Sealing Coating Of Epoxy/Polyurethane Resin. Gable Roof With A Slope Of 20°. The Main Supporting Structure Consists Of Steel Frames Designed From I-Section Profiles (Girder, Column, Transom). The Frames Are Spaced Every 6.00 M. Purlins Made Of Cold-Formed Z-Sections Are Placed On The Roof Transoms. The Structure Of The Internal Walls - The Room For The Repair And Reuse Point, Together With The Point For Exchanging Used Items (Not Waste) - Was Designed From Closed Steel Sections. The Main (Corner) And Intermediate Posts Are Designed From Shs 100*4 Mm Profiles, Embedded In The Floor, 320 Cm High. The Posts Are Attached To The Top Beams By Welding. R2 Transoms Made Of 200 Mm Ipe Sections, Attached To The Posts By Welding. R1 Transom Made Of Ipe 200 Section, Mounted Horizontally To The Main Hall Structure By Welding. The Ceiling Structure Is Made Of Roof Purlins Made Of Rhs 100*50*3 Mm Profiles, Supported On R2 Roof Beams Mounted At 150 Cm Intervals. The Scope Of Construction Works Within The Subject Of The Order Includes, Among Others: • Demolition And Dismantling Works, • Earthworks, • Foundation Works, • Works Related To The Erection Of Steel Structures, • Roofing Works, • Works On External And Internal Sanitary Installations, Rainwater, Electrical, Fire Protection, • General Construction Works And Other Accompanying Works, • Ensuring Occupational Health And Safety, • Ensuring Supervision Over The Works In The Form Of A Construction Manager. The Detailed Opz Is Attached As Annex 9 To The Swz

Contact Information