|
Flange End And Tip Pn16 Dn 200 C=500Mm, Including Screw, Washer, Nut And Ring. (Toco), Je2gs Elastic Joint - Supplied With Rubber Ring For Water Admission And Distribution, Manufactured According To Nbr 7675; And Anticorrosive Bituminous Enamel Or Painting In Liquid Epoxy 80 Μm Thick, Socket Collar In Ductile Cast Iron Fe 42012 Nbr 6916, For Use On Pvc Pipes, Cast Iron And Fiber Cement, Dn 50Mm (2) Non-Sticky Or Powder Coated With Epoxy Paint With Threaded Tap Hole In Accordance With Nbr Nm-Iso 7-1, Accompanied By Two Hex Head Screws, Two Hex Nuts, Four Hot Dip Galvanized Steel Washers In Accordance With Astm A 153 Class C, And Rubber Gasket For Sealing The Branch., Dn 250Mm (10) X ¾”, Dn 400Mm (16) X 90, 8 Nuts, 16 Washers In Hot Dip Galvanized Steel; Rubber Seal Ring (Epdm)), Pn 16, Dn 400 (16 Screws M24 Fºfº, Flange/Flange Pn 16, Dn 400 Degrees According To Nbr 7675, Dn 100 (Raw/Treated Water), According To Nbr 7675. Internal And External Coating In Bituminous Painting, Dn 200 (Raw/Treated Water), Flange End And Tip Pn16 Dn 400 C=500Mm, Ductile Cast Iron Blind Flange Pn10/16 Dn 100, According Nbr 7675, Flange With Thread Pn 10/16 Dn 100Mm In Ductile Cast Iron, Gibault Adaptation Caxpvc Joint 50 Mm (2) In Cast Iron, Internal And External Coating In Bituminous Paint, Including Ties, Nut And Washer In Hot Galvanized Steel (Nbr 14243/98), Sleeve. Adjustable Large Tolerance 130 7677, Rubber Ring For Elastic And Mechanical Joints For Ductile Cast Iron Pipes And Connections, Internally And Externally Coated With Anticorrosive Bituminous Painting With A Minimum Thickness Of 70Micrans., Including Screws, Nuts And Washers As Well As Gasket., 2 Tripartite Sleeve (Dn50) Sealing: Elastomer Gasket Nitrile/Natural According To Nbr 7676; Screws, Nuts And Washers: Carbon Steel (1010/20), Standard Din 933 (Full Thread) Or Din 931 (Partial Thread); Zinc Plated By Hot Immersion, In Accordance With Nbr 6323; 150 Short 30 Cm According To Nbr 7675, Dn 200
|
