|
Plain Black Cap - Model: American, Material: Twill With Cotton, Adjustment: Ribbon With Regulator And Metallic Inlay, Size: 58 Cm (With Regulator +/- 4 Cm), Brim Size: 18 Cm Produced In Rip Stop Fabric, Composed Of 65% Polyester / 35% Cotton, 2 Back Pockets With Velcro, 2 Side Cargo Pockets, Wide Belt Loops, Super Reinforced Seams, Reinforcement At The Horse, Bars With “Draw-Cord” Type Adjustment, Waist Adjustment, Front Closure (Fly) In Covered Zipper, With Protective Reinforcement At The Height From The Knees., Shirt (Gandola Type) - Shirt Made In Teal Blue Fabrics - Front And Back: A) Front And Back With Fabric Body, B) Front With Opening Closed By A Zipper That Ends At The Upper End Of The High Collar. Body With Ergonomic Side Cutouts Between The Front And Back, Which Extend From The Lower End Of The Piece To The Sleeve, Going To A Little Beyond The Armpits, Functioning As A Breather, In Order To Provide More Comfort To The User Back With Cutout Below The Collar Made Of The Same Fabric As The Side Cutouts Collar: High Collar (Priest Type) In Fabric, With Variable Length L2 Measuring 8.0 Cm Wide In The Middle Of The Back And 6.5 Cm Wide At The Ends Of The Collar. Synthetic Zipper Closure (Nylon) With Automatic Lock, In Blue Color M, Front Opening Closed By Zipper, Which Has, At Its Lower End, A Protection Superimposed On The Zipper Made Of The Same Fabric Specified In The Table, 1.0 Cm Long (See Figure 2). At Its Upper End, The Zipper Is Overlaid By A Small Fabric Flap As Specified In Table 2, Measuring 2.5 Cm In Width, Which, On The External Face Of The Zipper, Starts 2.5 Cm Below The Upper End Of The Zipper And Extends To The Inner Face Of The Zipper Until Its Lower End. The Function Of This Flap Is To Protect The Users Body From Contact With The Zipper And This Fabric Extension Facing The Outer Side Of The Garment Prevents The Users Chin From Rubbing Against The Zipper Slider.Sleeves: Raglan Sleeves In Fabric As Specified In The Table. Cuffs Adjusted By Flap Attached To The Joining Seam Of The Cuff Ends. Medium Fin 8.0 Cm Long And 5.0 Cm Wide, With Chamfered Upper Corner. Flap With Contact Closure (Velcro) Male Type (Rough Side) Fixed On The Internal Face Of The Fin, Measuring 3.5 Cm Wide By 5.0 Cm Long. On The Wrist, The Contact Closure Strip (Velcro) Female Type (Soft Side) Is Fixed. Nylon - Color: Black Polypropylene Ribbon: 83% Polypropylene And 17% Cotton, With 100% Cotton Filling Yarn, 100% Polypropylene External Yarn; Weft Yarns In The Same Specification Of Ends And, Warp Yarns 184; External: 60 Wires And Internal 60 Wires; Filling 56 Wires Connection 28 Wires Number Of Wires In The Weft 8.6 Beats Number Of Auxiliary Wires: 01 Screen Frame 1 X1 Total Weight 40 To 50 Grams Tensile Strength: External Wire 14.6 Kgf/Cm; Filling Wire 9.0Kgf/Cm Weft Wire In Black Color With 33Mm Width And 2Mm Thickness For Each Belt An Average Of 1300Mm In Length Will Be Calculated, Roller Type Tape: Made Of Noble Metal (Brass Sheet Norm Astm B36 Or Nbr 618 Nº26), Yellow Gold Color, 2Mm Of Thickness, Cold Stamped (High Relief), Through Friction Press, With Heat Treatment Of The Material, Standardization
|
