|
Removal Of Existing Pavement: Consists Of The Manual And/Or Mechanized Removal Of The Existing Flooring, With Transportation And Disposal Of The Materials, As Long As It Is Not Made Of Concrete. Such As: Rubber Flooring, Wood, Synthetic Grass And Other Surface Coverings. Regularization Of The Existing Base: Consists Of Applying A Leveling Layer In Cementitious Mortar With Incorporated Synthetic Microfiber. Intended For Environments Where There Is No Level Base. With A Maximum Thickness Of 5.0 Cm So That The Surface Remains Level, Smooth., Outdoor Articulated Multipurpose Surface: With Nominal Dimensions Of 250 Mm High Impact And High Mechanical Resistance, Suitable For External Use; It Must Have A Built-In Anti-Theft System, Integrated Into The Piece, With A Minimum Of 2 (Two) Specific Housings For Screw Fixing Per Plate, Allowing It To Be Anchored To The Base; Have A Multi-Point Perimeter Interlocked Fitting System, Male-Female Type, With A Minimum Of 10 (Ten) Male Locks And 10 (Ten) Female Locks Per Plate, Ensuring Firm Locking, Dimensional Stability And Adequate Load Distribution; Feature A Perforated And Latticed Surface, With A Homogeneous Texture And A Textured Finish In A 3D Diamond Effect, Ensuring Efficient Water Drainage, Reducing Puddles And Reducing The Risk Of Slipping; Contain Uv Protection Additives; Be 100% Moisture Resistant, Non-Hygroscopic And Resistant To Slime Formation; Present High Mechanical Resistance, High Impact Absorption, Low Heat Absorption And Low Dimensional Amplitude; Have A Minimum Warranty Of 10 (Ten) Years, Provided By The Manufacturer. Sports Demarcation: Demarcation With Bi-Component Flexible Paint Based On Pu. Primer: Solids (20 +/-2%) / Wet Thickness (10 To 30 Microns). Paint: Solids (40 +/-2%) / Wet Thickness (80 Microns) / Acrylic Pu Vehicle + Aliphatic Cyanate. Applied With A Special Roller., Modular Sports/Recreational System For Outdoor Use With Damping Pins: With Nominal Dimensions Of 300 Mm It Must Have A Built-In Anti-Theft System, Dimensional Stability And Adequate Distribution Of Loads; Feature Cushioning Technology Using Cylindrical Pins Made Of Thermoplastic Rubber (Tpe), Complying With Astm D 2240, Astm D 412 And Astm D 792 Standards, With A Minimum Of 44 (Forty-Four) Pins Per Piece, Guaranteeing Perfect Seat, Flexibility And High Impact Absorption, Contributing To The Protection Of Joints From Users; Feature Perforated And Lattice Surface, Ensuring Efficient Water Drainage, Provided By The Manufacturer.Demarcation:Demarcation With Flexible Bi-Component Pu-Based Paint.Primer: Solids (20 +/-2%) / Wet Thickness (10 To 30 Microns).Paint: Solids (40 +/-2%) / Wet Thickness (80 Microns) / Vehicle Pu Acrylic + Aliphatic Cyanate. Applied With Special Roller., External Robust Flexible Modular System: Approximate Dimensions Of 300 Mm Textured In Microtactile Modules, With Non-Slip Finish And Anti-Noise System
|
