Bids Are Invited For Acquisition Of Permanent Materials For The Municipal Hospital Antônio Martins Da Costa, ... in Brazil

Work Detail

Industrial Hospital Clothes Washing Machine Intended For The Processing Of Linen In Hospital Laundry With A Sanitary Barrier System Allowing Physical Separation Between The Dirty Area And The Clean Area. Metal Construction With Structural Base In Carbon Steel, Receiving Anticorrosive Treatment In Epoxy And Finish With High Resistance, Internal And External Drums In Stainless Steel Plate, 02 (Two) Doors With Large Opening Stainless Steel Sliding System, One For Dirty Clothes, And Another (On The Opposite Side) For, After Finishing, Removing The Clothes Clean. Internal Drum Symmetrically Perforated With Holes Stamped And Screwed Outwards, 04 (Four) Stainless Steel Beaters In A Longitudinal Direction, Transmission Mechanism On Steel Shafts And Bearings. Environment Separation Cabinet Positioned Over The Machine Itself In Stainless Steel With Large Viewfinder For Observation Of Movement On Both Sides, Duly Sealed. Reversal Through Digital Timer With Smooth Movement, Without Noise And Without Shocks, Protection Of The Mechanism To Avoid Any Accidents To Personnel Or Property. Wide Gauge Water Supply Points, Quick Drain Valve And Water Level Display. Equipped With A Locking And Safety Device That Prevents Operation When One Of The Doors Is Open, An Alarm To Draw The Operators Attention, An On/Off Control Panel, A Digital Timer (To Program The Operating Time), 2 Push Buttons (To Position The Basket Lids), One For Loading And The Other (On The Opposite Side) For Unloading The Clothes. 2 Indicators (One Indicating That The Machine Is On And Another Indicating End Of Operation), Electric Motor, Emergency Button. Technical Data Equal Or Higher: Capacity: 30 Kg Of Dry Clothes Per Load. Operation Cycle: 20 To 50 Minutes Per Load Internal Basket: Dimensions Compatible With The Specified Capacity Basket Rotation: Suitable For The Process, Industrial Dryer Intended For Drying Hospital Clothes, Suitable For The Laundry Operational Flow In Healthcare Services, Guaranteeing Efficiency In The Drying Process And Compliance With Current Sanitary Standards. The Equipment Must Have A Resistant Metal Structure, With Anti-Corrosion Treatment And A Finish Suitable For Continuous Use In A Hospital Environment And With High Resistance. Internal Drum In Perforated Plate, Internal Basket In Stainless Steel; Heating Located In The Upper Part Of The Machine Using Electrical Resistance, With A Powerful Exhaust Fan For Hot Air Circulation And Moisture Suction; Circular Door With Properly Sealed Glass Display; Motion Transmission Mechanism On Steel Shafts And Rolling Bearings; A Door For Periodic Cleaning Of Fluff And Other Residues That Fall From Clothes; Equipped With Time And Temperature Controller (Responsible For Heating, Cycle Time And Cooling Time); Safety Device, With Emergency Button And Lock According To Safety Standard Nr12 (To Deactivate Heating And Rotation When The Door Is Opened). Technical Data Equal Or Higher: Capacity: 30 Kg Of Dry Clothes Per Load. Operation Cycle: 30 To 50 Minutes Per Charge. Inner Basket: Compatible With The Industrial Drying Process. Occupied Space: Approximately 1300 Front

Contact Information