|
Tender for Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessaryaccessories And Screws Etc. Complete. , Providing And Fixing Aluminium Sliding Door Bolts Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc. Complete : , 300X16 Mm , 250X16 Mm , Providing And Fixing Aluminium Tower Bolts Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete : , 250X10 Mm , Providing And Fixing Aluminium Handles Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete : , 125 Mm , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete. , Twin Rubber Stopper , Providing And Fixing To Existing Door Frames. , 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of ‘H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness, Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. ‘U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per ManufacturerS Specification And Direction Of Engineer-In-Charge. (For W.C. And Bathroom Door Shutter). , Providing And Laying Ceramic Glazed Floor/Wall Tiles Of Size 300X300 Mm(Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement :4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc. Complete. , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I)Single Socketed Pipes. , 75 Mm Diameter , 110 Mm Diameter , 160 Mm Diameter , Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/ Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is :5382 Leaving 10 Mm Gap For Thermal Expansion. , 75Mm Coupler , 110Mm Coupler , 75 Mm Bend , 110 Mm Bend , 160 Mm Bend , Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50x50 Mm Hardwood Plugs, Screwed With M.S. Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. , 75 Mm , 110 Mm , 160 Mm , Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gms/Litre, Of Approved Manufacturer, Of Required Shade And Colour Complete, As Per Manufacturers Specification. , Two Or More Coats On Old Work. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : , One Or More Coats On Old Work. , Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sq. Meters And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete, Including Disposal Of Rubbish To The Dumping Ground , All Complete As Per Directions Of Engineer-In-Charge. , With Cement Mortar 1:4 (1 Cement : 4 Fine Sand). , Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out The Old Putty: , Float Glass Panes Of Nominal Thickness 4 Mm (Weight Not Less Than 10Kg/Sqm). , Providing & Fixing Transparent Plastic Acrylic/ Poly Carbonate Sheet Panes With Silicon Sealent Adhesive And Glazing Clips In Steel Doors, Windows, Clerestory Windows All Complete With : , 3.0 Mm Thick Acrylic / Poly Carbonate Sheet . , Renewing Glass Panes, With Wooden Fillets Wherever Necessary: , Float Glass Panes Of Nominal Thickness 4 Mm (Weight Not Less Than 10Kg/Sqm). , Providing And Fixing Double Scaffolding System (Cup Lock Type) On The Exterior Side, Up To Seven Story Height Made With 40 Mm Dia M.S. Tube 1.5 M Centre To Centre, Horizontal & Vertical Tubes Joining With Cup & Lock System With M.S. Tubes, M.S. Tube Challies, M.S. Clamps And M.S. Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For The Required Duration As Approved And Removing It There After. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connection With The Building Etc Wherever Required For Inspectionof Work At Required Locations With Essential Safety Features For The Workmen Etc. Complete As Per Directions And Approval Of Engineer-In-Charge.The Elevational Area Of The Scaffolding Shall Be Measured For Payment Purpose. The Payment Shall Be Made Once Irrespective Of Duration Of Scaffolding.Note: - This Item To Be Used For Maintenance Work Judicially, Necessary Deduction For Scaffolding In The Existing Item To Be Done. , Disconnecting Damaged Overhead/Terrace Pvc Water Storage Tank Of Any Size From Water Supply Line And Removing From The Terrace Including Shifting At Ground Level As Per Direction Of Engineer-In- Charge. , Providing & Fixing White Vitreous China Water Closet Squatting Pan (Indian Type) Along With S Or P Trap Including Dismantling Of Old Wc Seat And S Or P Trap At Site Complete With All Operations Including All Necessary Materials, Labour And Disposal Of Dismantled Material I/C Malba, All Complete As Per The Direction Of Engineer-In Charge. , Orissa Pattern W.C Pan Of Size 580X440 Mm , Taking Out Existing Wooden Door / Window Shutter, Repair By Cutting, Painting Etc. And Refixing Of Repaired Door Shutters To Existing Door Frames, Including Replacement Of Hinges With Screws, Etc. As Required, All Complete As Per The Direction Of The Engineer-In-Charge. , Supplying Services Of Labourer For Checking /Attending & Carryingout Out The Rectification, Repairing Etc. With Available Old Material For Civil Maintenance Jobs/Works At Diffrent Locations At Jabalpur Complete As Per The Directions Of Engineer-In-Charge. , Plumber/Carpenter , Beldar/Sewerman , Providing And Laying App (Atactic Polypropylene Polymer) Modified Prefabricated Five Layer, 3 Mm Thick Water Proofing Membrane, Black Finished Reinforced With Glass Fibre Matt Consisting Of A Coat Of Bitumen Primer For Bitumen Membrane @ 0.40 Litre/Sqm By The Samemembrane Manufactured Of Density At 25°C, 0.87 - 0.89 Kg/Litre And Viscocity 70 - 160 Cps. Over The Primer Coat The Layer Of Membrane Shall Be Laid Using Butane Torch And Sealing All Joints Etc., And Preparing The Surface Complete. The Vital Physical And Chemical Parameters Of The Membrane Shall Be As Under : Joint Strength In Longitudinal And Transverse Direction At 23°C As 350/300 N/5 Cm. Ear Strength In Longitudinal And Transverse Direction As 60/80N. Softening Point Of Membrane Not Less Than 150°C. Cold Flexibility Shall Be Upto -2°C When Tested In Accordance With Astm, D - 5147. The Laying Of Membrane Shall Be Got Done Through The Authorised Applicator Of The Manufacturer Of Membrane : (The Contractor Shall Furnish Guarantee Bond In The Enclosed Format. The Guarantee Period Shall Be For 5 (Five) Years) , 3 Mm Thick , Repair To Fallen/Damaged Or Cracked Reinforced Cement Concrete Slab/Beam/Column Plaster/Concrete In Varying Thicnesses Ranging From 15 Mm To 35 Mm By First Cleaning The Exposed Surface By Removing All Cracked/Loose Material Or Hidden Dirt Wire Brush Or Scrubber . Treating The Exposed Cleaned Surface By One Bond Coat Of Material Like Urp 301 Of Asian/Dr. Fixit Or Equivalent. Grouting The Treated Surface & Finish The Top Layer By Plastering With Mixture Of Cement & Chemical Urp 301 Of Dr. Fixit Or Equivalent In Proportion As Recommended In Manufactures Specification @ 12.5 % Of Quantity Of Cement Used & With Admixture Of Crack Seal Etc. For Proper Adhesion On Surface All Complete As Per The Directions Of Enginear-In Charge. , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. , Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineer-In-Charge. , Credit For: , Unserviciable Gi Pipes/Fiitings , Unserviciable Brass Bib/Stop Cocks/Pillar Tap , Gun Metal Gate Valve With C.I Wheel 80Mm Dia , Gun Metal Gate Valve With C.I Wheel 50 Mm Dia , Gun Metal Gate Valve With C.I Wheel 40 Mm Dia , Old Unserviceable Pvc/Ci Flushing Cistern 10/12.5 Lt , Badly Damaged C.I. Pipes (100 / 75 Mm Dia) , Old Unserviceable Pvc Water Storage Tank Of Capacity Upto 1500 Lts , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings Andfixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : , W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: , White Vitreous China Flat Back Wash Basin Size 550X 400 Mm With Single 15 Mm C.P. Brass Pillar Tap. , Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete. , 10 Litre Capacity - White , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. , 32 Mm Dia , Providing And Fixing Mirror Of Superior Glass (Of Approved Quality) And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shade With 6 Mm Thick Hard Board Backing : , Rectangular Shape 453X357 Mm , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. : Internal Work - Exposed On Wall , 20 Mm Nominal Outer Dia. Pipes. , 25 Mm Nominal Outer Dia .Pipes. , 32 Mm Nominal Outer Dia. Pipes. , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc. : Internal Work - Exposed On Wall. , 15 Mm Dia. Nominal Bore , 20 Mm Dia. Nominal Bore , 25 Mm Dia. Nominal Bore , 40 Mm Dia. Nominal Bore , 50 Mm Dia. Nominal Bore , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. : External Work , 40 Mm Dia. Nominal Bore , 50 Mm Dia. Nominal Bore , 65 Mm Dia. Nominal Bore , 80 Mm Dia. Nominal Bore , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) : , 25 Mm Nominal Bore , 32 Mm Nominal Bore. , 40 Mm Nominal Bore , 50 Mm Nominal Bore , 65 Mm Nominal Bore , 80 Mm Nominal Bore , Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete : , 15 Mm Nominal Bore , Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work) , 25 Mm Nominal Bore , 40 Mm Nominal Bore , 50Mm Nominal Bore , 65Mm Nominal Bore , 80 Mm Nominal Bore , Providing And Fixing G.I. Union In Existing G.I. Pipe Line, Cutting And Threading The Pipe And Making Long Screws Including Excavation, Refilling The Earth Or Cutting Of Wall And Making Good The Same Complete Wherever Required : , 25 Mm Nominal Bore , 40 Mm Nominal Bore , 50Mm Nominal Bore , 65 Mm Nominal Bore. , 80 Mm Nominal Bore. , Providing And Fixing C.P. Brass Bib Cock/ Pillar Tap 15Mm Nominal Bore For Wash Basins Of Approved Quality Conforming To Is:8931: & As Directed By The E-In-C. , Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 : , 15Mm Nominal Bore , Removing The Damaged Sanitary And Water Supply Fittings And Replacing Them With New Fittings Including Necessary White Lead/ Lead Wool Etc Complete As Directed By The Engineer - In - Charge. , Ptmt Bib Cock 15Mm Nominal Bore Of Approved Quality And Colour, 86 Mm Long Weighing Not Less Than 88 Gms. , Ptmt Stop Cock 15 Mm Nominal Bore Of Approved Quality And Colour , Weighing Not Less Than 88 Gms. , Providing And Fixing Ptmt Pillar Cock Of Approved Quality And Colour . , 15Mm Nominal Bore, 107 Mm Long. Weighing Not Less Than 110 Gms. , Replacement Of Old Pvc Connection By Providing And Fixing Unplasticised P.V.C. Connection Pipe With Ptmt Nuts, Collar And Bush Of Approved Quality And Colour. , 15 Mm Nominal Bore With 45 Cm Length. , Periodic Cleaning Of Polyethylene Water Storage Tank Of Capacity Upto 1500 Litres Situated On Roof Of The Building Upto Floor Five Level Including Removing Silt All Foreign Material From The Tank Etc All Complete. , Providing And Fixing Pvc Tank Lid To The Overhead Tank With Necessary Screws, Nails, Bolts & Nuts Complete Etc., As Per The Directions Of Engineer-In-Charge. , Providing And Fixing Unplasticized Polyvinyl Chloride (Upvc) Plain & Brass Threaded Fittings This Includes Jointing Of Fittings Wherever Required With One Step Upvc Solvent Cement All Complete As Per The Direction Of Engineer In Charge. , 20Mm Dia Nominal Bore Upvc Coupler , 25Mm Dia Nominal Bore Upvc Coupler , 40Mm Dia Nominal Bore Upvc Coupler , 20Mm Dia Nominal Bore Upvc Tee , 25Mm Dia Nominal Bore Upvc Tee , 40Mm Dia Nominal Bore Upvc Tee , 20Mm Dia Nominal Bore Upvc Elbow , 25Mm Dia Nominal Bore Upvc Elbow , 40Mm Dia Nominal Bore Upvc Elbow , Providing And Fixing Unplasticized Polyvinyl Chloride (Upvc) Plain & Brass Threaded Fittings This Includes Jointing Of Fittings Wherever Required With One Step Upvc Solvent Cement All Complete As Per The Direction Of Engineer In Charge. , 20Mm Dia Nominal Bore Upvc Union , 25Mm Dia Nominal Bore Upvc Union , 40Mm Dia Nominal Bore Upvc Union , 20Mm Dia Upvc Brass Mta (Male Threaded Adapter) , 25Mm Dia Upvc Brass Mta (Male Threaded Adapter) , 32Mm Dia Upvc Brass Mta (Male Threaded Adapter) , 40Mm Dia Upvc Brass Mta (Male Threaded Adapter) , 20Mm Dia Upvc Brass Fta (Female Threaded Adapter) , Attending Repairs To Mild Steel Or Aluminium Doors Or Windows By Removing And Attending Repairs Including Using Necessary Screws, Nails And Other Accessories Required For Smooth Functioning Of Door/ Window As Directed By The Engineer -In - Charge. (Steel/ Aluminium Hinges, Floor Springs, Locks Will Be Paid Separately) , Cleaning Of Drainage Manholes And Sewer Lines By Removing The Deposited And Other Rubbish From The Manholes And Cleaning The Sewer Lines By Rodding And Flushing With Water As Directed By The Engineer -In- Charge. (Rate Per One Manhole And Sewer Line To Next Manhole) , Cleaning Of Terrace / Spouts / Khurras / Canopies / Blocked Chajjas Etc., By Removing Leaves, Grass, Dust, Rubbish And Other Deposited And Accumulated Material Etc., Including Disposal Of Rubbish To Dumping Ground Up To A Distance Of 50M. , Terrace Area Upto 500 Sqm , Terrace Area Above 500 Sqm & Upto 1000 Sqm , Weeding Out Vegetation Growth Embedding From The Bulding At Different Locations And At Varying Height From 3Mtr To 10Mtr From Ground,Plucking, Pulling Out Roots Embedded Deep Inside The Building, Pouring Acid To Prevent Further Gowth Of Plants Complete Etc., As Per The Directions Of Engineer-In-Charge. , Trimming Of Grown Up Trees By Cutting Branches Up To 3.00 Metre From Gound Level Including Disposal To Dumping Ground Etc. Complete As Directed By Engineer-In-Charge.
|
