|
1. The Subject Of The Order Is The Execution And Handover In Accordance With The Technical Specifications For The Execution And Acceptance Of Works And In Accordance With The Detailed Technical Conditions For Road Signs And Signals, As Well As Road Traffic Safety Devices And The Conditions For Their Placement On Roads, Constituting Annex No. 1 - 4 To The Regulation Of The Minister Of Infrastructure Of July 3, 2003 On Detailed Technical Conditions For Road Signs And Signals And Road Traffic Safety Devices And The Conditions For Their Placement On Roads (Journal Of Laws Of 2019, Item 2311, As Amended) And Safety Rules For Road Users, Applicable Regulations And Principles Of Technical Knowledge And Construction Art, In The Scope Of: 1.1 Thin-Layer Horizontal Markings: A) Painting Pedestrian Crossings - Approx. 6,000 M2, B) Painting Bicycle Crossings And Parking Spaces With Colored Paint - Approx. 1,100 M2, C) Painting Lines Segregation, Continuous And Other Elements Of Horizontal Markings - Approx. 6,200 M2. The Contractor Will Perform The Painting Referred To In Point 1 From A) To C) With Paint With A Certificate And Intended For This Type Of Work. The Basic Painting Of Pedestrian Crossings And Pedestrian And Bicycle Crossings Will Be Carried Out By The Contractor By June 30, 2026, During Low Road Traffic Intensity, Without Impeding The Movement Of Road Users. 1.2 Thick-Layer Horizontal Markings: A) Thick-Layer Chemically Cured Painting Of Pedestrian Crossings, Segregation Lines, Continuous Lines And Other Elements Of Horizontal Markings - Approx. 300 M2. Horizontal Painting Thick-Layer, Chemically Hardened Pedestrian Crossings, Segregation Lines And Other Elements Of Horizontal Markings Referred To In Point 1.2 A) The Contractor Will Use Chemically Hardened Mass With A Certificate And Intended For This Type Of Work, Using Glass Beads. Painting Thickness 2.5 Mm.1.3 Vertical Markings According To The Current Needs Of The Ordering Party: A) Making And Installing A New Reflective Sign Shield - Approx. 83 M2, B) Making Double-Sided Street Name Plates And Mounting Them On A Post According To The Attached Patterns (Photos No. 1 And 2) - Approx. 30 Pcs., C) Making Posts For Road Signs And Street Name Plates: - Pipe Pole Galvanized Ø 60 Mm, Including Mounting The Sign And Positioning The Post - Approx. 50 Pcs., - Post Made Of A 60X60 Mm Steel Section, Hot-Dip Galvanized, Including Its Black Powder Coating And Installation (Photo No. 1 And 2) - Approx. 25 Pcs., - Renovation Of The Post, Including Assembly And Disassembly - Approx. 60 Pcs., - Moving The Post Along With Sign - Approx. 10 Pcs., - Dismantling The Bollard Along With The Sign And Repairing The Surface - Approx. 20 Pcs., D) Washing Road Sign Discs - Approx. 150 M2, E) Delivery And Installation Of A Road Mirror Ø 600 Mm - Approx. 10 Pcs. X 50 Mm (Contractors Threshold) - Approx. 75 Pcs., B) Installation Of The End Element Of A Plastic Speed Bump 600 X 300 X 50 Mm (Contractors Threshold) - Approx. 2
|
