|
Reg Footrest Footrest In Mdf, Supports Up To 15 Kg Of Weight, Approximate Dimensions Are 47 Cm X 41 Cm Wide And 19.5 Cm High. Height Of The Tray In Relation To The Ground Is Approximately 12.5 Cm. Present Technical Catalog As Per Public Notice, Tall Steel Cabinet 1950 Made From Sheet Steel With A Gauge Of No. 22 (0.75Mm). Door With Omega Reinforcement, Built-In Pivoting Hinges And Yale Type Lock With 2 Keys, Doors With Printed Handles Along The Entire Extent Of The Right Door That Overlaps The Left Door For Closing, 04 Shelves With Triple Folds On The Front And Double On The Sides To Eliminate Sharp Edges, Omega Type Reinforcement For Greater Resistance. Rack System Printed On The Support Columns With 20Mm Spacing Between Cutouts, With French Hand Style Supports Made Of 18(1, 20Mm) Galvanized Sheet Used To Fit And Support The Shelves. Assembly Of 30X30mm Type C Inverted Folds Forming Reinforcement Columns In The Corners Of The Cabinet, Locked Using Model 4, 8X9 Screws, With 5 Superb Thread Pan Heads Finished By The Anti-Ferruginous And Phosphating Plate Chemical Treatment System And Painting Using An Electrostatic Powder System. Dimension 900Mm(W)X400mm(D)X1950mm(H) Delivered Assembled In The Location Stipulated By The City Council. Present Technical Catalog As Per Public Notice, Tall Closed Cabinet 800 X 500 X 1600 (W Top Top Made With Medium Density Wood Particleboard (Mdp), 25 Mm Thick, Covered On Both Sides With Melamine Laminate, From Wood Certified For Reforestation With Fsc Seal, With 2 Mm Ps Tape Around The Entire Contour. Bodies (02 Sides, Base, Bottom And 02 Shelves) Made With Medium Density Wood Particle Board (Mdp), 18 Mm Thick, With 1.0 Mm Tape, Impact Resistant And Thermally Stable. Two Doors Made With Medium Density Wood Particle Board (Mdp), 18Mm Thick, With 2Mm Ps Tape, Impact Resistant And Thermally Stable, Metal Handles Made From Zamak Type Material, Drum Lock And 110º Hinges. The Metal Plinth Is Made Of 40X20mm Tube, Levelers Injected In High-Density Polyurethane, With A 5/16X1 Hexagonal White Zinc-Plated Screw. Fixed To The Base With Self-Tapping Screws. The Sides, Base And Top Are Fixed Using A 15Mm Rotating Drum Made Of Zamak-Type Steel With A Mounting Screw. Fast M6x20mm, Also Having Ø8x30mm Wooden Dowels, And Other Self-Tapping Screws With Bi-Chrome Finish. All Steel Structures Receive Anti-Rust Treatment Based On Zinc Phosphate With 04 Chemical Baths And Receive Electrostatic Powder Painting With Epoxy And Polyester Based Resin, Taking Into Account The Requirements. Preparation, Treatment And Curing Time Criteria Recommended By The Manufacturer Of The Paint Used, So That The Result Meets The Requirements Set Out In The Abnt Standards. Shelves, 01 Mobile And 01 Fixed.Top Top Made With Medium Density Wood Particle Board (Mdp), 25Mm Thick, With 2Mm Ps Tape Around The Entire Contour, Resistant To Weathering
|
