|
supply of fittings pipe caps - cs/as/ss for ag & ug piping (r04 bom) for msb, pfcc, gds, ff for nrep , supply of fittings pipe caps - cs/as/ss (for aboveground & underground) of msb unit for nrep project including tpi charges as specified in material requisition. , cap cs, b16.9, bw end,sch std, seamless, a234 gr.wpb-s, mat. deliv. cond. sch std, documents to be followed, tk-1zzza-pi-spe-0005 and in-042 , cap cs, b16.9, bw end,sch xs, seamless, a234 gr.wpb-s, mat. deliv. cond. sch xs, documents to be followed, tk-1zzza-pi-spe-0005 and in-042 , cap cs (nace), b16.9, bw end,sch xs, seamless, service nace, category 1, a234 gr.wpb-s, mat. deliv. cond. sch xs, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, for sour(nace) service req. acc. to, nace mr0103,nr-0zzzz-pi-spe-0025 and in-043 , cap cs (nace+hic), b16.9, bw end,sch xxs, seamless, service nace, category 2, hic test required, a234 gr.wpb-s, mat. deliv. cond. sch xxs, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, for sour(nace) service req. acc. to, nace mr0103,nr-0zzzz-pi-spe-0025 and in-043 , cap as, b16.9, bw ends,sch 160, seamless, a234 gr.wp5-s cl.1, mat. deliv. cond. sch 160, documents to be followed, tk-1zzza-pi-spe-0005 , cap cs (ibr), b16.9, bw end,sch std, seamless, a234 gr.wpb-s, mat. deliv. cond. sch std, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , cap cs (ibr), b16.9, bw end,sch std, seamless, a234 gr.wpb-s, mat. deliv. cond. sch std, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , cap cs (ibr), b16.9, bw end,sch std, seamless, a234 gr.wpb-s, mat. deliv. cond. sch std, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , cap cs (ibr), b16.9, bw end,sch xs, seamless, a234 gr.wpb-s, mat. deliv. cond. sch xs, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , cap cs, 3000,0, b16.11, sw end, forged, a105n, documents to be followed, tk-1zzza-pi-spe-0005 and in-042 , cap cs (ibr), 6000,0, b16.11, sw end, forged, a105n, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , cap cs, 3000,0, b16.11, threaded end,fnpt, forged, a105n, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042 , cap cs (nace), 6000,0, b16.11, threaded end,fnpt, forged, service nace, category 1, a105n, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, for sour(nace) service req. acc. to, nace mr0103,nr-0zzzz-pi-spe-0025 and in-043 , cap cs (nace), 6000,0, b16.11, threaded end,fnpt, forged, service nace, category 1, a105n, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, for sour(nace) service req. acc. to, nace mr0103,nr-0zzzz-pi-spe-0025 and in-043 , cap ss dual, 3000,0, b16.11, threaded end,fnpt, forged, a182 gr.f304/304l, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005, shall be dual certified and the, maximum carbon content shall be 0.03% , cap ss dual, 3000,0, b16.11, threaded end,fnpt, forged, a182 gr.f304/304l, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005, shall be dual certified and the, maximum carbon content shall be 0.03% , cap cs (galv.), 3000,0, b16.11, threaded end,fnpt, forged, a105n (galv.), supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042 , cap cs (galv.)&ext. coated, 3000,0, b16.11, threaded end,fnpt, forged, inside galvanised, a105n (galv.), supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, externally fbe coating acc. to, doc. nr-0zzzz-cv-spe-0015 , cap cs (ibr), 3000,0, b16.11, threaded end,fnpt, forged, a105n, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , supply of fittings pipe caps - cs/as/ss (for aboveground & underground) of msb unit for nrep project including tpi charges as specified in material requisition. , cap cs, b16.9, bw end,sch std, seamless, a234 gr.wpb-s, mat. deliv. cond. sch std, documents to be followed, tk-1zzza-pi-spe-0005 and in-042 , cap cs, b16.9, bw end,sch xs, seamless, a234 gr.wpb-s, mat. deliv. cond. sch xs, documents to be followed, tk-1zzza-pi-spe-0005 and in-042 , cap cs (nace), b16.9, bw end,sch xs, seamless, service nace, category 1, a234 gr.wpb-s, mat. deliv. cond. sch xs, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, for sour(nace) service req. acc. to, nace mr0103,nr-0zzzz-pi-spe-0025 and in-043 , cap cs (nace+hic), b16.9, bw end,sch xxs, seamless, service nace, category 2, hic test required, a234 gr.wpb-s, mat. deliv. cond. sch xxs, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, for sour(nace) service req. acc. to, nace mr0103,nr-0zzzz-pi-spe-0025 and in-043 , cap as, b16.9, bw ends,sch 160, seamless, a234 gr.wp5-s cl.1, mat. deliv. cond. sch 160, documents to be followed, tk-1zzza-pi-spe-0005 , cap cs (ibr), b16.9, bw end,sch std, seamless, a234 gr.wpb-s, mat. deliv. cond. sch std, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , cap cs (ibr), b16.9, bw end,sch std, seamless, a234 gr.wpb-s, mat. deliv. cond. sch std, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , cap cs (ibr), b16.9, bw end,sch std, seamless, a234 gr.wpb-s, mat. deliv. cond. sch std, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , cap cs (ibr), b16.9, bw end,sch xs, seamless, a234 gr.wpb-s, mat. deliv. cond. sch xs, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , cap cs, 3000,0, b16.11, sw end, forged, a105n, documents to be followed, tk-1zzza-pi-spe-0005 and in-042 , cap cs (ibr), 6000,0, b16.11, sw end, forged, a105n, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. , cap cs, 3000,0, b16.11, threaded end,fnpt, forged, a105n, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042 , cap cs (nace), 6000,0, b16.11, threaded end,fnpt, forged, service nace, category 1, a105n, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, for sour(nace) service req. acc. to, nace mr0103,nr-0zzzz-pi-spe-0025 and in-043 , cap cs (nace), 6000,0, b16.11, threaded end,fnpt, forged, service nace, category 1, a105n, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, for sour(nace) service req. acc. to, nace mr0103,nr-0zzzz-pi-spe-0025 and in-043 , cap ss dual, 3000,0, b16.11, threaded end,fnpt, forged, a182 gr.f304/304l, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005, shall be dual certified and the, maximum carbon content shall be 0.03% , cap ss dual, 3000,0, b16.11, threaded end,fnpt, forged, a182 gr.f304/304l, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005, shall be dual certified and the, maximum carbon content shall be 0.03% , cap cs (galv.), 3000,0, b16.11, threaded end,fnpt, forged, a105n (galv.), supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042 , cap cs (galv.)&ext. coated, 3000,0, b16.11, threaded end,fnpt, forged, inside galvanised, a105n (galv.), supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, externally fbe coating acc. to, doc. nr-0zzzz-cv-spe-0015 , cap cs (ibr), 3000,0, b16.11, threaded end,fnpt, forged, a105n, supp. requirements, for size =1 1/2 , taper internal threads, as per asme/ansi b1.20.1, for size 2 to 6,taper internal threads, as per is554, documents to be followed, tk-1zzza-pi-spe-0005 and in-042, ibr certificate in form iiic required. = limited
|
