|
Tender for Procurement For Physics Laboratory. , Name Instrument , Alumina Crucible With Lid , Quartz Crucible With Lid , Agate Pestle Mortar , Spatula , Thermometer , Whatman Filter Paper , Fixed Angle Clamp With Stand , Butter Paper , Magnetism Lab Trainer It Should Have Following Technical Specifications: Types Of Material Of Magnet: 1. Alnico 2. Ceramic Or Ferrite 3. Rare Earth Magnet (Neodymium) Shapes Of Magnet: Bar Magnet U-Shape Magnet Horse Shoe Magnet Cylindrical Magnet Ring Magnet Disc Magnet Magnetic Compass Magnetic Field Demostrator Lenzs Law Demonstrator Motor Assembly Coil: No. Of Turns : 400 Inductance (Approx.) : 2.3Mh Max. Current : 0.728 A It Should Perform Following Experiments: Plotting Of The Combined Magnetic Field Of The Earth And A Bar Magnet And To Locate The Neutral Points. Calculation Of The Magnetic Moment And The Pole Strength Of The Magnet Study Of Magnetic Field Lines By Magnetic Field Demonstrator Study Of Magnetic Levitation By Floating Ring Magnets Study Of Oersted Law Study Of Faradays Law Of Electromagnetic Induction Study Of Lenzs Law Study Of Electromagnet Study Of The Principle Of Motor By A Simple Assembly Of Motor , To Study The Lcr Circuits. It Should Have Following Features: • Lcd Voltmeter And Frequency Counter • Inbuilt Signal Generator • Low Cost Board Demonstrating Both Series And Parallel Resonance On The Same Board • Experiments Can Be Performed With Or Without Oscilloscope • Inbuilt Power Supply • Online Product Tutorial It Should Have Following Technical Specifications: Mains Supply : 90 - 275V, 50/60Hz Generator Output : 8Vpp Frequency Ranges : 1Khz, 10Khz, 60Khz Voltmeter : 2V Optional Oscilloscope Scientech 800 It Should Perform Following Experiments: • Study Of Series R-L-C Resonance And To Determine Its Resonance Frequency • Study Of Parallel R-L-C Resonance And To Determine Its Resonance Frequency. , Determine Plancks Constant Using Led It Should Have Following Features: • Lcd For Current And Voltage • Variable Power Supply (0-5Volt) • Online Product Tutorials And Manual Should Be Available To Perform Lab Experiments By Following Step-By-Step Experimental Procedure It Should Have Following Technical Specifications: Mains: 230V , 50 Hz Fuse: 0.5A Dc Power Supply: 0 - 5V Led Type: Super Bright Size: 5 Mm Colours: Blue, Green, Orange, Red Dc Voltmeter: Type: Lcd Display: 3½ Digit Range: 200 Mv - 200 V Dc Ammeter Type: Lcd Display: 3½ Digit Range: 2?a - 200 Ma It Should Perform Following Experiments: • Determination Of Plancks Constant Using Light Emitting Diode (Led). • Draw The I-V Characteristic For Light Emitting Diode (Led) And Hence Determine The Threshold Voltage. • Determination Of Plancks Constant By Plotting Curve Between Threshold Voltage And Wavelength Of Leds. , To Determine Various Parameters Using Four Probe Set Up It Should Have Following Features: • A Complete Setup For Measurement Of Resistivity & Band Gap • Four Individually Spring Loaded Probe Arrangement Is Provided • Collinear And Equally Spaced Probe • The Probes Are Mounted In A Teflon Bush, Which Ensure A Good Electrical Insulation Between The Probes • Germanium Crystal In The Form Of A Chip Is Provided • Oven Arrangement With Safety Precaution • Provision For Low And High Rates Of Heating • Online Product Tutorials And Manual Should Be Available To Perform Lab Experiments By Following Step-By-Step Experimental Procedure It Should Have Following Technical Specifications: Four Probe Contacts With Sample: Spring Loaded Space Between Probes: 2 Mm ±2% Probes: Collinear Sample Material: Germanium Crystal Type: N-Type Thickness: 0.50 Mm Oven Maximum Temperature: Room Temperature To 200°C (Max) Heater Resistance: 37Ohms (Approx.) Maximum Heater Voltage: 45 V Measurement Unit Digital Voltage Measurement: Display: 3½ Digit, With Auto Polarity Range: X1(0 - 200 Mv) And X 10(0 - 2 V) Resolution: 100 Mv At X1 Range Constant Current Generator: Current Range : 0 To 20 Ma Resolution: 1 Ma Accuracy: ±0.25 % Or ±1 Digit Open Circuit Voltage: 18 V Oven Power Supply: Input: 230 V Ac ± 10% Heating Options: A) Low : 40 V Ac B) High: 45 V Ac Temperature Measurement: Mercury Thermometer Range: 0 -150 ° It Should Perform Following Experiments: • Determination Of Resistivity And Band Gap Of Semiconductors By Four Probe Method At Different Temperatures. , Seebeck It Should Have Following Features: • High Seebeck Coefficient Of Thermoelectric Module • Micro-Controller Based Measurement • Digital Display Of Temperature Of Hot And Cold Side • Provided With Pc Based Measurement And Calculation • Online Product Tutorials And Manual Should Be Available To Perform Lab Experiments By Following Step-By-Step Experimental Procedure It Should Be Able To Perform Following Experiments: Display: Lcd (16 X 2) Temperature: Range: 0 - 150°C Resolution: 0.1°C Voltage: Range: 0 - 2000 Mv Resolution: 0.1 Mv Glass Beaker: 250 Ml Fan: 3 V Supply: Adaptor Input: 220-240 V, 50 / 60 Hz Adaptor Output: 5 V, 1 A It Should Be Able To Perform Following Experiments: • To Study The Seebeck Effect • To Study The Peltier Effect • Understanding Conversion Of Energy From One Form To Another • Application Of Thermal Energy • To Plot Graph Between Thermo Emf Generated V/S Temperature Difference. • Calculation Of Seebeck Coefficient. , Electrostatics Lab Trainer It Should Have Following Features: • Complete Training System To Study The Fundamentals Of Electrostatics • Electrostatic Charging By Induction, Conduction, Friction • Digital Electroscope Consists Of Charge Polarity Indicator & Display • Accessories Are Provided In A Good Quality Carrying Case With Foam Inserts • Online Product Tutorials And Manual Should Be Available To Perform Lab Experiments By Following Step-By-Step Experimental Procedure. It Should Have Following Technical Specifications: Electroscope Display: Measures Relative Intensity Of Charge In Millivolts Charge Polarity Indicators: Blue Led - Negative Charge, Green Led - Positive Charge Rods: Teflon, Ebonite, Perspex Cloths: Silk, Cotton, Woolen Pith Balls (With Pendulum): Single & Pair Is Provided For Different Observations Power Supply: 230 V ± 10 %, 50 Hz It Should Perform Following Experiments: • To Study The Charge Induction In Electrostatics • To Study The Charge Conduction In Electrostatics • To Study The Pith Ball Pendulum Electroscope • To Study The Relative Charges Of Different Rods With The Help Of Digital Display In Milli Volts • To Study The Electrostatic Charge With The Help Of Charge Demonstration Tube • To Study The Electrostatic Charge By The Combination Of Different Rods & Cloths , Study Of V-I Characteristics Of Diodes. It Should Have Following Features: • A Complete System To Study The Diode Characteristics • Forward And Reverse Characteristics Experiment Can Be Performed On This Trainer Kit • Silicon, Germanium, Zener And Light Emitting Diode (Led) Are Provided With This System • Inbuilt Ammeter And Voltmeter Are Provided • Digital Display For Displaying Voltage And Current • Different Test Points Are Provided • Online Product Tutorial It Should Have Following Technical Specifications: On Board Dc Power Supply: +12V Dc Ammeter Range : 1?a To 200Ma Display : 3½ Digit Voltmeter Range : 1Mv To 200V Display : 3½ Digit Mains Power : 230V Ac ±10% Dimension (Mm) : W 365 X D 260 X H 120 It Should Perform Following Experiments: • Study Of V-I Characteristics Of Silicon Diode • Study Of V-I Characteristics Of Germanium Diode • Study Of V-I Characteristics Of Zener Diode • Study Of V-I Characteristics Of Light Emitting Diode (Led) , To Assemble And Verify The Truth Tables Of Or, Nor, And, Nand-Logic Gates It Should Have Following Features: • Exclusive And Compact Design • Straight Forward Representation Of All Logic Gates • +5V Smps Adaptor Provided With The Trainer For Power Supply • Designed By Considering All The Safety Standards • Online Product Tutorial • Low Cost Product Including Illustration Of All Logic Gates It Should Have Following Technical Specifications: Input : +5V Dc Logic Levels +5V : High ( Logic 1 ) 0V : Low ( Logic 0 ) Dimensions (Mm) : W 240 X D 345 X H 110 Weight : 1 Kg It Should Perform Following Experiments: • Study Of And Gate And To Verify Its Truth Table • Study Of Or Gate And To Verify Its Truth Table • Study Of Not Gate And To Verify Its Truth Table • Study Of Nand Gate And To Verify Its Truth Table • Study Of Nor Gate And To Verify Its Truth Table • Study Of Xor Gate And To Verify Its Truth Table • Study Of Xnor Gate And To Verify Its Truth Table , Simple And Compound Pendulum It Should Have Following Features: • Digital Stop Watch • Self-Contained Setup • Simple And Compound Pendulum • Online Product Tutorial It Should Have Following Technical Specifications: Bar Rod Length : 1M Breadth : 4.3Cm Width : 0.7Cm Number Of Holes : 19 Distance Between Holes : 5Cm Diameter Of Holes : 1Cm Diameter Of Bob : 2.47Cm Height Of Hook : 1.1Cm Measurement Unit Adaptor Input : 100-240V, 0.2A, 50 / 60Hz Adaptor Output : 5V It Should Perform Following Experiments: • To Determine The Acceleration Due To Gravity By Object Drop Method • To Determine The Acceleration Due To Gravity By Simple Pendulum • To Determine The Acceleration Due To Gravity With The Help Of Compound Pendulum • To Determine The Radius Of Gyration And Moment Of Inertia Of A Compound Pendulum About Its Centre Of Gravity , Hydraulic Press Machine Manual Operated, With Hydraulic Laboratory Pellet Press Accessories, Die Set Pellet (Ddd Ss Dia 10 Mm) , Muffle Furnace With Programmable Pid Temperature Controller , Magnetic Stirrer With Temprature Indicator, Magnetic Bid For Stirring 5 Mm, 10 Mm, 15 Mm Diameter (Qty-5 Each Size), Cylindrical Shape , Infrared Light Heat Lamp , Stop Watch , Vernier Caliper , Screw Gauge , Spherometer , Benchtop Ph Meter , Analytical Balance
|
