|
Manufacture And Installation Of A Water Tank With A Capacity Of 16,000L. Manufacture, Supply And Installation Of A Water Tank With Approximate Capacity Of 16,000 Liters, Elliptical Model, Intended For Irrigation And Washing Of Public Roads, Containing At A Minimum: Tank Made Of Carbon Steel, With A Minimum Thickness Of 4.75 Mm, Including Tops And Internal Wave Breakers; Equipped With A Minimum Of 03 Wave Breaker With Opening For Upper And Lower Inspection;Fixing Structure And Reinforced Chassis Made Of Minimum ¼;01 Upper Inspection Cover, Approximate Diameter Of 450 Mm;Internal Painting With Epoxy Primer And Epoxy Paint, And External Painting With Epoxy Primer And Automotive Paint Finish;Pump Driven By Power Take-Off, With Cardan Transmission, Approximate Minimum Capacity Of 90 M³/H, With Approximate Pressure Of 70 M.C.A., Installed In The Vehicle; Front Nozzles Type Street Wash, With Activation In The Cabin; 01 Reel With Hose Of Approximately 25 Meters And Adjustable Nozzle; Rear Access Ladder With Handrail And Anti-Slip Steps; Side Protectors, Retractable Rear Bumper And Reflective Strips, In Accordance With Current Traffic Legislation., Manufacture And Installation Of Water Tank With 10,000L Capacity . Manufacture And Installation Of A Water Tank With A Capacity Of 10,000 L. Manufacture, Supply And Installation Of A Water Tank With Approximate Capacity Of 10,000 Liters, Containing At Minimum: Elliptical Tank In Carbon Steel, Minimum Thickness Of 4.75 Mm; Tops And Internal Wave Breakers In The Same Thickness; 02 Internal Wave Breakers With Inspection Opening; Fixing Structure With Reinforced Chassis In Minimum Sheet Metal Of ¼;01 Upper Inspection Cover With Approximate Diameter Of 450 Mm;Internal Painting In Anti-Corrosive Epoxy And External Painting In Epoxy Primer And Finishing In Automotive Pu Paint, In A Color Defined By The Municipality;Pump Driven By Power Take-Off, Transmission By Cardan, Minimum Capacity Of Approximately 90 M³/H And Pressure Approx. Of Safety, Side Protection, Rear Bumper And Reflective Signage In Accordance With Current Traffic Legislation., Manufacture, Supply And Installation Of Train Type Set For Supply And Lubrication, With Approximate Total Capacity Of 8,000 Liters. Manufacturing, With A Total Capacity Of Approximately 8,000 Liters, Containing At Least: Main Structure Metal Structure With Side Compartments For Storing Equipment And Supplies; Tank Divided Into 02 Compartments Of Approximately 4,000 Liters Each, Made Of Carbon Steel With A Minimum Thickness Of 4.75 Mm; Internal Wave Breakers And Upper Covers Inspection Unit With Approximate Diameter Of 450 Mm; Pressure Relief Valves And Bottom Valves With Pneumatic Actuation; Fixing Structure On Reinforced Chassis Made Of Minimum ¼ Sheet Metal. Diesel Supply System Fuel Pump With Approximate Capacity Of 30,000 Liters/Hour; Supply Reel With Approximately 1 E Hose Buy
|
