|
Fruit Centrifuge Description Centrifuge, Domestic Model, For Extracting Juices From Fruits And Vegetables, Separating The Juice From Seeds And Pomace. Dimensions And Capacity Maximum Diameter/Width: 400 Mm; Maximum Height: 440 Mm; Maximum Depth: 450 Mm; Minimum Collection Cup Volume: 1.2 Liters. Features Feeding Tube And Extra Wide Nozzle In Stainless Steel Or Acrylic To Absorb Whole Fruits And Vegetables. Stainless Steel Filter. Stainless Steel Blades And Sieve. Juice And Pomace Collection Cups (Jars) In Stainless Steel Or Acrylic. Security Lock. With Pulse Function And 2 Speed Settings Depending On The Thickness And Texture Of The Food. Firm Base With Non-Slip Feet (Suction Cup). Motor With Minimum Power Of 700W. Dimensioning And Robustness Of The Wiring, Plug And Electrical Connectors Compatible With The Operating Current. Voltage: 110V And 220V, As Per Demand. Power Cord (Rabicho) Certified By Inmetro, With Voltage Indication. Minimum Warranty Of One Year From The Date Of Delivery, Full Coverage Of The Equipment. The Manufacturer/Contractor Is Obligated To Provide Free Technical Assistance In Its 150 Accredited Assistance Network, During The Warranty Period, Replacing Defective Parts., Teacher Set Set For Teacher Consisting Of A Table And A Swivel Chair. Teachers Table: The Top Must Be Made Of 18 Mm Thick Mdp Sheet. It Must Be Coated, On Both Sides, With Thermo-Pressed Melamine Film, With A Minimum Thickness Of 0.2 Mm. The Contour Of The Top Must Be Topped With A 2 Mm Pvc Edge, Hot Glued Using The Hot-Melt System, With A 2 Mm Radius And A Uniform White Finish. The Table Must Have A Front Panel Made Of 18 Mm Thick Mdp, Measuring 1200 X 250 Mm, Covered With White Melamine Laminate And Fixed To The Front Of The Table Using Four Screws. Once Assembled, The Table Must Have Dimensions Of 1,200 Mm (Width) X 600 Mm (Depth) And Must Be 760 Mm High. The Metallic Structure Must Be Formed By A Steel Tube Frame, Consisting Of Two Beams And Two Headboards. In The Four Lower Corners Of The Frame There Must Be A Steel Cone Intended For Mounting The Table Legs. The Legs Must Be Made Of Steel Tube And, At The Lower End Of Each Foot, There Must Be A Plastic Shoe With Height Adjustment, Made Of Polypropylene, To Level The Table. All Metal Parts Must Receive Anti-Corrosion Treatment And Paint With Epoxy Powder Paint. The Body And Drawers Must Be Made Of 15 Mm Thick Mdp, Covered On Both Sides With Thermo-Pressed Melamine Film With A Minimum Thickness Of 0.2 Mm. The Fronts Of The Drawers Must Be Made From 15 Mm Mdp, Covered On Both Sides With Thermo-Pressed Melamine Film, With A White Finish. The Bottom Of The Drawers Must Be Made Of 3 Mm Hdf, Coated On One Side, And Equipped With Metal Slides Made Of Stamped Steel With A Black Electrolytic Zinc Finish, Equipped With Nylon Rollers And An Opening Limiting Brake System, With A Load Capacity Of Up To 10 Kg Per Drawer. The Assembly Of The Drawers Must Be Carried Out Using A System Made Up Of Abs Thermoplastic Connectors That Join The Sides..., 3-Seater Stringer Chair, The Base Must Be Defined By A Fixed Structure Made Of Industrial Tube Of Mechanical Construction Made Of Carbon Steel. At Its Ends It Must Have Two Tapered Gloves,
|
