|
Signaling Plate Made Of Galvanized Steel Sheet No. 18 (1.25 Mm Thick) Abnt Nbr 11904/2015 Or Acm 3Mm According To Abnt Nbr 16179:2021. Reflective Film: Prismatic Technical Grade Type I. Plate Dimensions: Width And Height: Will Be Defined At The Time Of Ordering. Colors: Background, Internal And External Border, Legend, Symbols And Letters: May Contain Reflective Colors Or Not (To Be Defined By Ditran At The Time Of Order, And The Same Plate May Contain More Than One Color). When Not Reflective Type Iv Film. Films Must Comply With Abnt 14644:2021., Long Reflective Conical Bollard Features: Stackable, Made From Rotomolded Plastic With Uv Protection, Weather Resistant, In Citrus Orange Color, With Approximate Measurements: Height Of 110 Cm; Top Diameter 10 Cm; Lower Diameter Of 20 Cm With Reinforced Flap Of 4 Cm, With The Following Features: Solid Anatomical Top Without Holes, In T-Shape With 130 Mm High The Goalpost Must Weigh Between 1.5 And 2.0 Kg; Recycled Rubber Base In Black Color With Octagonal Shape Measuring 16 Cm On A Side By 4 Cm In Height, Weighing Between 6 And 7 Kg, With An Opening Of 20 Cm In Diameter And Recess For Perfect Fitting Of The Bollard; 02 Self-Adhesive Retroreflective Collars, Flexible, In White Color, 10 Cm Wide Each, 8 Cm Apart, Positioned In Recessed Locations Of The Bollard At A Height Of Not Less Than 60 Cm, In Order To Prevent Them From Being Teared When Stacked. It Has In Its Upper Part, Just Below The Handle, 4 Symmetrical Holes That Allow The Passage Of Plastic Tape For Insulating Areas, Chains And Ropes. Ditran Painted For Owner Identification., Extendable Reflective Pantograph Barrier Features: For Blocking Traffic Division, Made Of Roto Molded Polyethylene In Orange Color; With Protection Against Ultraviolet Rays; With Approximate Measurements Of: Length Of 80 Cm Closed And Extension Of Up To 6 M Open; Height From 1.15 To 0.55M; Composed Of 16 High-Resistance Plastic Rulers, 10 Cm Wide X 3 Cm Thick And With Rounded Corners; Special Recesses Measuring 40 X 5 Cm, For Applying A Reflective Strip, Avoiding Wear And Tear And Providing Bidirectional Signaling; It Has 03 Detachable Galvanized Steel Shoes, Measuring 19 X 40 X 3 Cm (W X L X H) And 4 Mm Thick; Nylon Strap With Velero Closure, Facilitating Transport., Horizontal Plastic Barrier - Features: Made Of Medium Density Polyethylene Using The Rotomolding Process, With Protection Against Uv Rays; Polished External Finish; Rounded Corners, With Approximate Measurements Of: Thickness 3 Mm X 1500 Mm Length X 450 Mm Width X 500 Mm Height; Fit Between Pieces Using An Overlapping Pin; Hollow Bottom Allowing Stacking Of Parts And The Lower Part Of The Body Double Walled Forming A Ballast Bag; Flat Base With Proportionally Distributed Shoes For Better Fixation To The Ground And Water Passage, Preventing Involuntary Displacement; Reflective Strips In Recess On Both Sides And In The Lower Part Of The Body Double Wall With Ballast Bag Formation; Application Of Engineering Grade Self-Adhesive Retroreflective Film In White With A Width Of 150 Mm (+-5) Each, Arranged Flush With The Recess In Order To Prevent Wear And Tear On The
|
