|
Bivolt Electronic Photo Relay (Operating Voltage 105V To 305V) With Switching Capacity For Resistive Load Of 1000W, And 1800Va For Inductive Load, Both Operating At Voltage Must Be Synchronous Type At Zero Voltage Crossing At The Time Of Switching With A Maximum Modular Voltage Difference Of 50V At The Instant Of Switching Switching. The Part Must Have A Minimum Degree Of Protection Of Ip67. Must Have Protection Against Surges In The Power Supply Network. The Relay Must Have A Switching Cycle Time Between On And Off Of No Less Than 2 Seconds And No More Than 5 Seconds. The Remaining Characteristics Must Comply With The Nbr 5123 Standard. The Durability Of The Relay Contact Must Be At Least 40,000 Cycles. 5-Year Warranty., Electronic Photoelectric Relay, Na, Polypropylene Body And Polycarbonate Base, Stabilized Against Uv Radiation, Tinned Brass Contacts, Nominal Voltage 105 -305 Vac, 1,800 Va, 60 Hz, Delayed Activation, Turns On 10 To 15 Lux, Turns Off 25 Lux, Ip Protection Degree 67., Black Insulating Tape, Minimum Roll Measurement Of 19.0 Mm X 20.0 M (Length) 76Mm, Classification Group 14, Validity 05 Years., Carbon Steel Circular Post Strap (Clamp); Laminate; Supplied With Screws And Nuts In Carbon Steel, Rolled Or Drawn And Forged; With A Diameter Of 180 Mm., 13/03/2026 - 10:29:43, Rolled Or Drawn And Forged; With A Diameter Of 210 Mm, Rolled Or Drawn And Forged; With A Diameter Of 230 Mm, Rolled Or Drawn And Forged; With A Diameter Of 250 Mm, Carbon Steel Circular Post Strap (Clamp); Laminate; Supplied With Screws And Nuts In Carbon Steel, Rolled Or Drawn And Forged; With A Diameter Of 280 Mm, Rolled Or Drawn And Forged; With Diameter Of 320 Mm., Piercing Bypass Connector (Cdp) - Main: 16 – 120 Mm², Bypass: 4 Mm² – 35 Mm² And Nominal Adjustment Torque: 15 N.M., Wedge Connector Type I – 35 Mm²., Wedge Connector Type Vii – 50 Mm²., Flexible Cable 1.5 Mm². Description: Flexible Electrolytic Copper Cable, Flame Retardant Pvc Coated, Nominal Section 1.5 Mm², Nominal Conductor Diameter 1.5 Mm, Nominal Insulation Thickness 0.7 Mm, Nominal External Diameter 2.9 Mm, 70º C, 450/750 V, Class 4, 100 Meter Roll, According To Specifications From Nbr Nm 247-3, Nbr Nm 280, Inmetro Certification. Forward Sample., Swan Type Arm – Br-2, Curved Fire Gv, Arm For 01 Luminaire, Must Be Manufactured With Sae 1010/1020 Steel Tube. It Should Not Present Wrinkles Due To Its Manufacturing Process, Guaranteeing Its Mechanical Characteristics. Projection: 3000; Finish: Hot Dip Galvanized According To Nbr 6323 With Average Layer Of 70 Μ. Warranty: 5 (Five) Years Regarding Galvanization. Normative Reference: Nbr 6591 Carbon Steel Tubes With Longitudinal Welding. Specification: Nbr 8800 Design Of Steel Structure And Mixed Structure Of Steel And Concrete Buildings. Nbr 6323 Galvanization Of Steel Or Cast Iron Products – Specification: Nbr 8800 Design Of Steel Structure And Mixed Steel And Concrete Structure Of Buildings. Nbr 6323 Galvanization Of Steel Or Cast Iron Products. The Material Must Present A Galvanization Certificate., French Screw With Square Nut, Length 75 Mm, Total Thread M16
|