|
Tender For Certain Misc B R Repair To Range Target Sand Filling At Firing Range Under Ge P No 1 Jabalpur; 1 Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified and directed. 2 Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed. 3 Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed. 4 supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed 5 supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wallor laid in floors complete all as specified and as directed. 6 Dismantiling of stone slabs and tiles (Kota stone etc.)of any discription or any thickness in floors, aprons, skirting, dado etc.laid bedded and pointed in any mortar complete all as specified and directed. 7 Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and directed. 8 Demolition of cement concreteof any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed. 9 M&L for vitrified ,coloured and printedtiles of8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.80 Sqm as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. 10 M&L for vitrified ,coloured and printedtiles of width as directed and8 to 9 mm thick as in skirtingfixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. 11 M&L for non skid ceramic tiles, joint free, coloured tiles7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.42 sqm, in floors etc set over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. 12 M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mmmm thick as in skirtingfixed over and including 10 mm thick cement screed in(1:3) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed. 13 M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thickon vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3)completeall as specified and directed. 14 S&F 10 mm thick pavertiles out door vitrified tiles area n. exc 0.36 sqm each asin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:6) complete all as specified and directed. 15 M&L forPCC(1:2:4) type B2, (using20 mm graded stone aggregate), as in foundations / mass concrete/ levelling course complete all as specified and directed. 16 M&L Granite slab18 mm to 20 mm thick machine cut, bedded and joined withcementand pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bedCM (1:3) .the shade of granite stone including cutting and polishing type as incill and jamb/skirting, steps cooking plateformsincludigng rounding off the exposed edges and polishing complete all as specified and directed. 17 M&L for machine cut cuddapastone slab 30-35 mm thick , as in platform below WHB etc complete all as specified and directed. 18 Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. 19 M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed. 20 M& L for Brick work with sub-class `B bricks, straight or curved on planto anyradius, in half brick workbuilt in cement mortar 1:4 complete all as specified and as directed. 21 M&L for 75mm thick PCC (1:2:4) Type C2using 40mm graded stone agg as in plinth protection surface even and fair without using extra cement including forming & filling expensionjoints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected 22 Taking downcement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc. Complete all as specified and as directed. 23 M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. 24 M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed. 25 M&L for preparation of the newly plastered surfacesof walls & applyingthree coats of white wash onwall surfaces complete all as specified and directed. 26 M&L for preparation of the newly plastered surfacesof ceiling & applying3 coats of white wash on ceiling surfaces complete all as specified and directed. 27 M & L for two coat of oil bound distemper over and including a coat of Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed. 28 Preparation of old decoratedsurface of ceiling and including cornices plastered or unplastered surfaces bybrooming down or steel wire brushing toremove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white washcomplete all as specified and directed. 29 Preparation of old decoratedsurface of wall and including cornices plastered or unplastered surfaces bybrooming down or steel wire brushing toremove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L for one coats of distemperoil emlusion white or tinted complete all as specified and dircted. 30 M&L for Preparing of old decoratedsurface of wall and including cornices plastered or unplastered surfaces bybrooming down or steel wire brushing toremove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots andM&Lapplying onecoat of white wash, complete all as specified and directed. 31 Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. 32 Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. 33 Supply & Fixing solid PVC door frame of size50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified anddirected. 34 S &F for factory made solid panel PVC door shutter 30mm thick ( style) consisting to framemade out ofM.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVCCchannel having a PVC sheet strip of 20 mmwidth struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. 35 M & L forPowder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 36 M & L forPowder coated (minimum thickness of powder coating 50 micron) aluminium Louvers 4 to 6 blade including 3mm thick frosted glass as , ventilatorsincluding joining cleat screw washersfor fixing etc. complete all as specified and directed. 37 S&F 4.8 mm thick plain glassof selected qualityin square, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed. 38 Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including 2Nos 300 mm size SS heavy duty handle,SS Floor lock,of 12 mm thick as in door including Eaching desingn/Mono as complete all as specified and directed. 39 S&F in repair galvanised wire cloth, 0.35mm nominal dia of wire and average width of aperture 1.40mmand fixed with tinned tacks or galvanisedstaples complete all as specified and directed 40 S&F for aluminium alloybutt hinges of 100mm size complete all as specified and directed. 41 S&F for Stainless Steel Butt hinges , medium weight, cold rolled , of size 100 mm complete all as specified and directed. 42 S&F for Extruded aluminium alloy handle of 150 mm size fabricatedtype, anodised complete all as specified and directed. 43 S&F for Extruded aluminium alloy handle of 200 mm powder coated size cast type for alluminium shutter type, anodised complete all as specified and directed. 44 S&F for aluminium anodised barrel tower bolt of 150mmof extruded section complete all as specified and directed. 45 S&F for aluminium alloy anodised sliding door bolt of 250mm with haps, staple ( bolt type ) & fixing clips of sheet ,cast or extruted sections and fixing bolts andslinding bolts of extruded sections complete all as specified and directed. 46 S&F for floor door stopper of brass body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring, fixed to shutters complete all as specified and directed. 47 M&L for applying for two coats of synthetic enamel paint over a coat of red oxideprimer on new/oldsteel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed. 48 S&F for 3mm thick,PVC Fibre sheet glass, ordinary quality and glazing with oil putty/steel window/wooden window with beads pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed. 49 S&F for in repairs looking mirror of selected quality glass mounted on 5 mm thick PVC fibre boardand fixed to wooden plug with chromiun plated screws complete all as specified and directed. 50 S&F for in repairsfloor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring,150mm long, fixed in floor complete all as specified and directed. 51 Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed. 52 S&F for 12 mm thickprelaminated particle board exterior grade prelamilated one side with decorative choice lamination and other side balancing white laminationfixed with screws complete all as specified and directed. 53 S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed. 54 S&F for extruded Stainless steelCP handle of 100 mm size fabricatedtype, anodised complete all as specified and directed. 55 S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. 56 S&F in reapir 25mm dia Stainless steel curtain rodheavy duty icluding fixing cliops,end knobs decorative type not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) complete all as specified and directed. 57 Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc.,(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 58 S&F for 110mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed. 59 S&F for 75 mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,fixed to walls. complete all as specified and directed. 60 S&F for 110mm dia PVC(SWR) pipes bends any radious complete all as specified and directed. 61 S&F for 75 mm dia PVC(SWR) pipes bends any radious. complete, complete all as specified and directed. 62 S&F for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed. 63 S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. 64 M&L for 75 mm dia of out letPVC (SWR) floor trap plain withCP grating including jointing with solvent cement as in repair complete all as specified and directed. 65 M&L for cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railingsupto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed. 66 S&F for sinks madeout of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 650 mm x 480 mm with 200 mm deep boul complete all as specified and directed fixed in repair. 67 S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed. 68 S&F for in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. 69 S&F for peg set of six S.S.fixed to wall with PVC plugs and screw, complete all as specified and directed. 70 M&L for vitreous china casecade type single piece including daul flush type white pvc connection complete fixed in repairs and making good to floor, complete all as specified and directed. 71 S&F for in repairsofvitreous china wash basin, white, flat back/oval type, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap andPVC connection will be measured paid separetly complete all as specified and directed. 72 Supply only15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed. 73 S&F for in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. 74 S&F in repair Health faucet with1.00 metre tube ( Branded tube ) including flexible pipe and brass chromium plated nuts completed all as specfied and directed.Make:- Prayag cat No BEA-40Sor equivenet in other make 75 S&F 15mm Bore CP Wallmixer 3 in 1 ( provision of OH shower and hand shower)w Cat No 9280 of pryagor equivenet in other make complete all as specified and directed. 76 Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed. 77 S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.600x600mm grid all as specified.S&Ffor Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh including POP cornice as directedcomplete all as specified and directed. 78 Measurement & Labour for Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material 8 mm thick reinforced with cellulose fibre for fixing in 600 mm × 600 mm grid including gap filled with sealing compound to match the ceiling surface GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel Intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approximately 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre hangers 6 mm dia. G.I. (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 × 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified and directed. 79 M&L for making plaster of parish cornices, exc 100mm butr n exc 300mm in size, design as approved by GE. Complete all as specified and directed. 80 S&F for in repairs Stainless steel chromium plated sliding channel 450mm to 550mm long , fixed in repair, complete all as specified and directed. 81 Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed. 82 Excavating in posts holes (or similar holes) in hard/dense soil each n.exc 0.50 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed. 83 M/L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed. 84 S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed. 85 S&F for in repairsvitreous china urinals, Half stall type ,whitewith grating and union for discharge pipecomplete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. 86 S&F for as in repairviterous china wash down water closet pan (pedestal pattern) white including fixing bolts,flushing cistern and flush pipe,seat cover including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed. 87 S&F for in repairs PVC Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms complete all as specified and directed. 88 S&F for in repairs 15mm,pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered hot or Cold with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified and directed . 89 S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered hot or Cold with long srewed shanks and flynuts, srewedfor iron pipe fixed and complete all as specified and directed. 90 S&F for 15mm ,bib tapFancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered hot or Cold with long srewed shanks and flynuts, srewedfor iron pipe fixed in repair and complete all as specified and directed. 91 S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixedin repairs, complete all as specified and directed. 92 S&F Drawer/C.B.mortice lock Brass body size 50 mm 4 levers complete all as spd and directed fixed as in repairs complete all as specified and directed. 93 M&L Two or more coats of Deco painting over primmed prepaired wooden surface complete all as specified and directed. 94 S&F Teak wood leaping 10 mm thick 30 mm wide decorative type complete all as specified and directed. 95 S&F PVC Fibre beeding 18mm wide 1 mm thick paste with adhesive/solvent complete all as specified and directed. 96 S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 GDE -165, complete all as specified and directed. 97 M&L Black colour solid ACP wall lining consisting of 3mm thick plain inclusive of solvent cement /Adhesive including Alluminium frame work complete all as specified and directed. 98 M&L for SS Box type Letters Height 12 to 18 including Led Lighting and connection up to Main Socket/DB Nos of Letters up to 40 white fixed to ACP sheet as in repair complete all as specified and directed. 99 M&L MES LOGO 0.90 to 1.0 m height with LED module & power supply cable DB etc as in repair complete all as specified and directed. 100 M&L for sand filling under Target/ Butt including shape and size as per site/size of Butt as in repair comlete all as specified ans directed.Up to 15 m height complete all as specified and directed. 101 Fabrication for erection fixing onlyMS plates (plain or chequred ) chennals,square cut or notched (ordanery) and counter sunk forming holes with out any attachmentsall as specified and directed.including welding all round height up to 15m including bottom of slab.(Grade of steel Gde E-250 quality A) Except plate complete all as specified and directed. 102 M&L for MS plates (plain or chequred ) chennals,square cut or notched (ordanery) and counter sunk forming holes with out any attachmentsall as specified and directed.including welding all round height up to 15m including bottom of slab.(Grade of steel Gde E-250 quality A) complete all as specified and directed. 103 S&F for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc fixing of MS plate and like complete all as specified and directed. 104 S&F for mild steel screw bolts machine made with hexagonal or square heads at one ends and secured to other other or screwed both ends to be fitted washer and one hexagonal nut exc 10 cm but n, exc 15 cm dia 16 to 20 mmcomplete all as specified and directed. 105 Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed. 106 M & L 100mm th PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in floor /Pavingfinished even and smooth without using extra cement complete all as specified and directed. 107 M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling or mass concrete complete all as specified and directed. 108 M&L for forming mortice holes,n.exc 50 cu cm for balusters ,newals,rag bolts etc and grouting with cement morter 1:2 after balusters etc and fixingcomplete all as specified and directed. 109 S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified anddirected. 110 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified anddirected by Engineer-In-Charge. 111 S&F for Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 50mm), sliding sash (38mm x 62mm). Sliding mesh Sash (38mm x 54mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steelFrame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, HardwareTouch Lock of zinc alloyed (white powder coated),(a) Area of each window Exc 1.5 Sqm but not exceeding 4.00 sqm each complete all as specified.Including 4mm thick plain glass & 0.35 mm dia SS wire mesh with aparture of 1.40mm complete all as specified anddirected. 112 S&F Block board grade 2 interior grade commercial type BWR type 18 mm thick complete as in cup board, drawer,partition fixed to wall complete all as specified anddirected. 113 S&F 1 mm thick decorative laminated type 1 or fixed with adhesive to wooden surface surface finish coloured and pattern as approved complete all as specified and directed. 114 M & L for 18mm thk lnsulated PVC Wall Lining consisting (WPC/Celuka) of PVC Insulated Panels with single side Prelam PVC sheet used in-stead of Plain colour sheet as in cupboard, wardrob,table etc and similar works etc work to be done at site complete all as specified and directed. 115 S&F Plywood 12 mm thick 7 ply BWR grade type BB as in design/shape directed by Engr-in-charge fixed with screw adhesive complete all as specified and directed. 116 S&F Plywood 6 mm thick 5 ply BWR grade type BB as in design/shape directed by Engr-in-charge fixed with screw adhesive complete all as specified and directed. 117 Dismantling timber scantlings 40 q. cm and over in section, in any position complete all as specified and directed. 118 S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed. 119 Dimantling of asbestos cement corrugated or semi corrugates asbostos sheets in roofingcomplete all as specified and directed. 120 M&L Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. 121 M&L Pre-painted galvatume aluminium zinc coating GI based plainsteel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. 122 Schedule of credit of Amount Rs.183573.00 to be deducted during AOC.NOTE - WORKING HOURS FOR CERTAIN BUTT WORKS SHALL BE AFTER 5 PM TO 6 AM ONLY.
|
