|
Tender For Work Of Erection Of 66Kv Equipment, Structures, Control Wiring, Yard Lighting, Installation Of Earthing, Control Room Electrification, Providing & Fixing Of Furniture Etc. At 66Kv Nandana S/S.-1 Erection of equipments of any type / make with required all spares & accessories as per supplier's manual and FQP, including individual & interpole wiring of for all mentioned voltage class switchyard (as per respective technical specification & relevant Special Conditions) Suitable for all types of bus configurations. Scope includes the dragging/loading/unloading of same from site to erection site. Erection of Breakers - 66 KV wo Crane. 2 Erection of CT & PT CVT on erected structure including complete dragging/ loading/ unloading of same with crane only from site store to erection site and fixing of required clamps, connectors as per instructions of Engineer-In-Charge. 66 KV CT/PT (without Crane permitted) 3 Erection of surge arrestor with counter on Erected structure including complete dragging/loading/ unloading of the same with crane only from site store to erection site and fixing of required clamps, connectors as per inst. of Engineer-In-Charge. 66 KV 4 Erection of Centre Break/Double Breake Isolator (All make) with earth blade on its erected structure consisting of 3 base channels with porcelain/solid core insulator including interconnected piping with operating mechanism and accessories with final adjustment for simultaneous operating & closing. The rates are inclusive of dragging / loading / unloading of the same from site store to erection site as per instruction of Engineer-In-Charge. 66 KV 5 - - DO - - as above but without earth blade complete. 66 KV 6 Erection of 66KV Poly cone/Solid Core/Bus Post Insulator on its erected structure complete, fixing of accessories and shifting of same including loading/ unloading from its site store to erection site. 66 KV 7 Laying of any size of 11/22 KV XLPE/PILC cable including excavation of trench 300mm wide & 600mm deep including laying and filling up sand of 100mm layer from bottom & bricks on three side of cable & refilling the trench with Murram/soil & ramming etc. Required bricks, sand, power cable marker/C.I./G.I. plate etc. will have to be supplied by the contractor. Rates are inclusive of shifting of cable drum to the site from S/S site store. Drum should be handled only by jacking to avoid damage to cables. 8 Laying of any size of 11/22 KV XLPE/PILC cable in ready made cable trench or in open space. Rates are inclusive of shifting of cable drum to the site from S/S site store. Drum should be handled only by jacking to avoid damage to cables. 9 Erection S/S & Equipment structure including punching of nut bolts. Rates are inclusive shifting of same up to erection site from s/s Store66 KV 10 Erection of 66/22-11KV, class Power Transformer with complete mounting of all the accessories i.e. bushings, radiators, conservator tank etc.as per OEM approved drawing including laying of cable between all accessories/mounted on the transformer/ marshalling KIOSK. Filling and filtration of oil with filter machine as per direction of Engineer-In-Charge,manufacturer Engineer or as per instruction manual of equipment. All necessary tools tackles, required filter machine,Hydralic Jack, Vacuum pump etc. eequired for transformer shall be provided by the contractor. Filtration of oil will in scope of the contractor for the transformer. i) 05 MVA ii)10 MVA iii) 15 MVA iv) 20 MVA 11 Stringing of Bus complete in all respect with fixing of all fitting, insulators sag compensating spring and all accessories as per the instruction of Engineer-In-Charge.Single Moose/AL 59/Zebra conductor 12 Preparing and fixing of required length of jumpers of single Moose/Zebra/Panther/ Dog in the switchyard on respective Bus & equipments, tensioning & dressing of jumpers complete as per instruction of E.I.C. 13 Installation of earthing strips/MS Round bar in any kind of soil except Rocky (HR/SR) soil (A) For Grid Earthing:- It is including digging of 600mm depth and 450mm wide trench as per earthing philosophy of GETCO including fixing of two bolt at each joints and lap welding, removing oxide films formed during welding, applying two coats of red oxide and black powder after welding and applying zinc rich paint on welded joints including supply of GI Nuts & bolts as per specification. (B) For Structures and Equipment Earthing:- Cutting, bending, laying and fixing from Grid to Structure and Equipment by lap welding, removing oxide films formed during welding, applying two coats of red oxide and black powder after welding and applying zinc rich paint on welded joints including supply of GI Nuts & bolts for all connections and supporting to structures etc. as per specification. 50x6mm G.I. Strips 14 Installation of earthing strips/MS Round bar in Rocky (HR/SR) soil (A) For Grid Earthing:- It is including digging of 600mm depth and 450mm wide trench as per earthing philosophy of GETCO including fixing of two bolt at each joints and lap welding, removing oxide films formed during welding, applying two coats of red oxide and black powder after welding and applying zinc rich paint on welded joints including supply of GI Nuts & bolts as per specification. (B) For Structures and Equipment Earthing:- Cutting, bending, laying and fixing from Grid to Structure and Equipment by lap welding, removing oxide films formed during welding, applying two coats of red oxide and black powder after welding and applying zinc rich paint on welded joints including supply of GI Nuts & bolts for all connections and supporting to structures etc. as per specification. 50x6mm G.I. Strips 15 Providing bore for bore type earthing with drilling of minimum 200 mm dia bore up to 18 mtr depth in any type soil or rocky soil strata. Work includes inserting 50X6mm flat (for 66KV SS) / 75x10 mm Flat ( For EHV SS) or 20/25 mm dia MS rod (For 66KV SS) / 40mm Dia MS Rod (For EHV SS) in bore depth and to be conneted to the earthing grid at junction point by proper welding at both end. This includes cutting , fabrication & welding of flat and refilling & compression of surrounding areas with mixture of Normal/yellow soil/ground enhancment material/coke, charcol, salt, etc. Wherever applicable as per approved soil strata and earthing design calculation. Required GI Earthing strip will be given by GETCO free of cost. Earthing material like Normal/yellow soil/ground enhancment material (0.5 CMT/ Meter depth ) coke, charcol, salt, etc shall be supplied by contractor. 16 Supply,installation,Testing & Commissioning of maintainanace free treated earth electrods Suitable for NORMAL SOIL as per drawing no. GETCO/E/P-021 (1 of 2) R2 dated:04-06-15 and technical specification GETCO/E-TS-Maintainanace Free earth pits/R1 dated 04.06.15 for 66/11 KV Sub-Stations with ground enhancement material/back filling/ grounding compound as per IEEE 80-2000 clauses 14.5 (d) and as per Part-7 of IEC-62561 using copper bonded earth electrode (with 250 micron coppper coating) having 24 mm dia.(Min) and 3000 MM length which shall be capable of handling STC of 25 KA-1 sec. Work also includes providing BB Masanory inspection chamber (manhole) incl. light type CI cover. 17 Fabrication for erection of any Equipment/Structure/panel or anywhere in s/s & F.B. at other endas per Inst. Of E.I.C. 18 Erection of support structure for 11 KV Power cable termination at 11 KV Bushing for 10/15 / 20 MVA power transformer as per Drawing No: GETCO/E/06S-STD/11 KV STR- A2-02. 1) Material for supporting structure will be supplied free of cost by GETCO 2) Necessary wooden clamps as per drawing with required nut-bolt-washers & HDPE rubber piece for packing etc shall be supplied by contractor. 3)Job also includes minor fabrication if required as per instruction of EIC. Erection of support structure for Station Transformer as per GETCO Drawing No: GETCO/E/06S-STD/11 KV STR- A3-03. 1)Necessary wooden clamps as per drawing with required nut-bolt-washers & HDPE rubber piece for packing etc shall be supplied by contractor. 2)Job also includes erection of required 11KV LA and D.O. fuse and minor fabrication if required as per instruction of EIC. 3) Material for supporting structure, D.O. fuse & 11KV LA will be supplied by GETCO free of cost. Providing & fixing Set of following Items on erected 11kV support structure system for power cable of 66/11kV Transformer as per GETCO drawing No..GETCO/E/06S-STD/SPL-028A, R3, DT-26.10.2016 and instruction of EIC. 1) Allu. alloy bus bar of size 120X20X2000 mm with heat shrinkable anti tracking tubing : 03 Nos. 2) 11kV SRI of PCD 127 mm - 12 No. 4) Copper laminated fusion welded flexible jumper of size 75 X 10 X 600 mm having 2000 Amp capacity : 03 No. (4) Bi Metalic Plate (Al/Cu): 03 No. (5)11kV Heat Shrinkable anti tracking Sleeve on Al Bus bar of all three Phase: 06 mtrs (6) Including required GI/SS nut-bolt and washer of good Quality for fitting support structure. (7) All live parts shall be coverd with heat shrinkable MV insulated tape/ sleeve. Erection of 11kV D.P. Structure as per GETCO Drawing No.: GETCO/E/06S-STD/11 kV STR- A1-01. 1) Job includes erection of 11kV A/B Switches, 11kV PI, jumpering between 11kV cable to 11kV bus, etc. on erected structure. 2) Material for DP structure, AB switches, PI and conductor for jumpers will be supplied free of cost by GETCO. 3) Necessary wooden clamps with required nut-bolt-washers & HDPE rubber piece for packing etc. to hold 11kV power cable as per drawing shall be supplied by the contractor. 4) Job also includes miNo.r fabrication if rquired as per instruction of EIC. 22 Erection of 11kV D.P. Structure as per GETCO Drawing No.: GETCO/E/06S-STD/11 kV STR- A4-04. 1) Job includes erection of 11kV A/B Switches, 11kV LA, jumpering between 11kV cable to 11kV bus, etc. on erected structure.2) Material for DP structure, AB switches, PI and conductor for jumpers will be supplied free of cost by GETCO. 3) Necessary wooden clamps with required nut-bolt-washers & HDPE rubber piece for packing etc. to hold 11kV power cable as per drawing shall be supplied by the contractor.4) Job also includes Minor fabrication if rquired as per instruction of EIC. 23 Stringing of Single ACSR Dog bus between 11kV D.P. Structure (A1) to cross boundry structure (A4) in all respect. 1) Job includes fixing of all fittings and accessories on erected DP structures. 2) Single tension hardware suitable for ACSR Dog Cond.- 6 set shall be supplied by the contractor. 3) Necessary ACSR DOG conductor, 11kV Insulators will be supplied by GETCO free of cost. 24 Providing of M15 Grade Concrete for various equipment structure, Guy, 11kV DP, M.K. Box, Neutral channels, cable support channel, grouting of Pole/ Flood light structure with cement, sand & metal in proportion of 1:2:4 respectively. 1) Work includes muffing with smooth cement mortar (1:6) finish. 2) Necessary sand, metal, water & cement shall be supplied by the contractor. 25 Loading, Transporting & Unloading of all material for 66 kV substation like Structure, indoor & out door Equipments, DP Structure, earthing materials, Battery set, fire wedge, GI/MS scrap, all other required materials, etc. in all respect for Substation & oposite end feeder bay from Store (Any store either const. div. or R & M store within respective Zone) to Sub Station Site. This job also includes crediting balance materials at respective construction division store at No. extra cost 26 Supply & laying of 1 CoreX25mm2, armroured Copper Cable, multi-strand flexible of approved make ISI marked in ready made trench or PVC pipe from Battery Charger to Battery Set including termination at both side as per inst. of EIC. 27 Providing and fixing of various type of sign Board, sticker, Big Sign Board, earthing pit Board & Single line diagram etc. as per instruction of IEC. Sticker of red, white, black Letters are to be utilised for various sign board.Earthing Pit Board Size:- 6" x 6" -30 Nos.Safety Slogan Board, Hard Sheet board size 2' x 2'and 4mm thick (Gujarati Language)- 2 Nos.Safety Slogan Board, Hard Sheet board size 3' x 2'and 4mm thick (Gujarati Language) with red and Yellow colour.-03 Nos.Single line diagram size 5' x 3' Digital with Alluminium frame with fitting and as per approved diagram given by IEC.-01 No.Big sign board size 5' x 4' and 2mm thickness indicating sub station name digital with S.S. rod with hole & as per approved symbol with fitting charge.- 01 No. Switch yard sign Board 12" X 6" with 2 mm Thickness black & white Gujarati language.-25 Nos. Safety Slogen Board size 2" x 6" in side control room.-05 Nos. Various type of control room equipment sticker size-24 cms x 5cms.--18 Nos. Prohibition Board: size - 5' x 3' with 2mm thick MS Sheet on MS square pipe/ angle frame with hole and fitting charge.- 01 No. Maintenance Chart Board: size - 5' x 3' Digital with Alluminium frame with fitting and as per detail given by IEC. - 01 No. Zero Accident Board: Size - 2' x 3' Digital with Alluminium frame with fitting and as per detail given by IEC. - 01 No. Safety picture board size :- 3' x 3' (Laminated for O/D use)-03 Nos. Name plate board of transformer size :- 2' x 1'- 04 Nos. Cable marker size:- 6" x 6", Radium, fixed on 750mm long M.S.Rod for fixing arrengement.- 30 Nos. 28 Providing & fixing of Radium sticker for out door sticker for outdoor & indoor Equipment identification like L.A.,Isolator ,circuit Breaker,Transformer,CT,PT,MK Box,C & R Panels,11 kv panel board etc. 29 Providing and Fixing of fire stand made from 75mm dia Gl pipe A class ISI mark heavy duty having 5ft width and 4ft height as per inst of Engr. In charge 1) Work includes cutting, drilling, welding of pipe as required. Fabrication and supply of 16mm dia meter hook size required for hanging the buckets. 2) 4 Nos.of fire buckets are to be provided by the contractor. 3) Fire stand should grouted with excavation of pit size 300mm x 300mm-2 Nos. of 600mm depth with 1:3:6 mix muffing 300mm in height including leveling of stand. 4) The fire stand is to be painted with post box red colour of approval quality as per instruction of EIC. 5) All required approved material including cement, sand, metal etc are to be provided by contractor. 30 Labour charge for fixing of 11kV XLPE Indoor/Outdoor cable kit of any make for 11kV, 3C x 95 sqmm to 300 sq.mm XLPE power cable. Cable kit will be provided by GETCO. 31 Providing & Fixing of RAYCEM/MSEAL/CABSEAL or equivalent GETCO approved make heat shrinkable type 11kV XLPE Indoor/Outdoor cable Termination kit suitable for 11kV, 3C x 95 sqmm to 300 sq.mm XLPE power cable. 32 Providing & Fixing of Aquaguard Total Reviva Water R.O. Plant including Commissioning & Testing and also with required peripherals for installation of plant as per site condition (1) Dimension: 320 X 275 X 410 mm (2) Weight : 8 KG (3) Water flow : 8 to 12 LPH (4) Input power : 230V AC (5) RO membrence : TFC spiral You have to provide guarantee for the 12 month from the installation. 33 Providing and fixing of ISI mark Rubber Matting sheet Suitable for 11kV Class As per following specification. Reference IS:15652-2006 with latest amendment. Suitable for Voltage Class :B Max Use Voltage : 11kV AC proof voltage : 22kV Dielectric strength : 45kV Leakage current : < 10 micro ampere Colur BLUE Make : Vardhman or equivelent ( Rubberhouse India) Width :1 mtr. Thickness :2.5 mm. Surface :Chequred on one side and other side plain. NOTE: Contractor has to supply Rubber Matting sheet as per IS:15652-2006 with latest amendment specification and shall submit test certificate for routine test as per relevant IS 34 Providing & fixing of reputed make ISI mark Fire Extingusher.with latest ammendment Dry chemical powder 09 kg Capacity Note: Contractor shall submit Test certificate for routine test as per relevant IS. 35 - Do - but CO2 type - 6.5Kg 36 - Do - but CO2 type - 22.5Kg 37 - Do - but Mechanical foam type - 50Ltr 38 Erection of control panel relay panel or C/R panel or RTC panel including grouting of panel, jointing with adjoining panels including required fabrication for entry of control cables and complete vermin proofing. Job includes supply of required bolts, nuts etc. and shifting of panel from S/S site store to work site. Erection of 11KV CB panel of any make including grouting, jointing with adjoining panels & horizontal , vertical levelling including required fabrication in control panel or required stone cutting in flooring for entry of power cable, control cable, including interpanel wiring and complete vermin proofing. Job includes supply of required bolts, nuts etc. and shifting of panel from S/S site store to work site. -DO- but for LT panel GETCO including fixing of all switches bus bars etc. Erection of battery charger of any make as per manufacture ‘s instruction manual including grouting , vermin proofing Erection of 100 AH / 250 AH DC battery set on wooden stand as per instruction manual of supplier including first filling of battery solution, proper connection of cells and applying charging /discharging cycles as per manufacturer’s / instruction of engineer in charge b) 100 AH, 250 AH , 110 V Erection of station transformer of 22 KV or 11 KV / 430 V on its plinth , grouting of foundation bolts, fixing of channels, danger board etc. including connection with power cable LV cable terminations including shifting from S/S site store to plinth as per the instruction of engineer in charge. TOTAL - 1 ( SCHEDULE B - 1 ) SCHEDULE B - 2 : CONTROL WIRING Description of work/Supply Preparing of complete schedule of wiring for line/ transformer bays in triplicate. necessary drawing will be provided by the GETCO. Schedule should be approved by EE or DE in charge. (a) 66 kV Laying of 1.1 KV PVC armored copper/ aluminum cable inside Hume pipe/cable trench including binding/clamping of cable with Gl wire as per requirement including supply and fixing of identification tags on both ends and at distance every 10 mtr for following size. a)2C × 2.5 mm2 ,2 C × 3.5 mm2 , 4C x 2.5 mm2, 7C × 2.5 mm2, 4C x 4 mm2 Copper control cable or any equivalent size of all LT cable. b) 12C x 2.5 mm, 12C x 4 mm2, 12C x 6 mm2, 19C x 2.5 mm2, 27C x 2.5 mm2, Copper control cable, 3.5 C or 4 C x 10 mm2, 70 mm2 aluminum armored or unarmored LT power cable. Laying of 1.1 KV PVC armored copper /aluminum cable in ground by digging trench of suitable width and 450 mm depth in any type of soil including supply and fixing of identification tag on both end and at distance every 10 mtr for following size a)2C × 2.5 mm2 ,2 C × 3.5 mm2 , 4C x 2.5 mm2, 7C × 2.5 mm2, 4C x 4 mm2 copper control cable or any equivalent size of all LT cable. b) 12C x 2.5 mm2, 12C x 6 mm2, 19C x 2.5 mm2, 27C x 2.5 mm2, copper control cable, 3.5 C or 4 C x 10 mm2, 70 mm2 aluminum armored or unarmored LT power cable. Providing and fixing 'B' class G.I. pipes of following size for cable protection including fixing with the structures.( Non SOR) including required 'L' & 'T' band,coupling for CT,PT, Transformer, M.K.Box cabling on structure including required fabrication. 49 a) 40mm dia (weight of pipe-3.2kg/meter) 50 b) 50mm dia (weight of pipe-5.1kg/meter) Termination of Control Cable at Panel / M.K./ Equipments including supply of required size of double compression type metal glands, lugs, ferrules, PVC Binding Tape, Buttons, Cable ties, etc. for following size of cables. 51 a) Up to 7 Core Control Cable., 52 b) As above but for Above 7 Core Control Cable., 53 Providing & installation and commissioning of remote control switch board for ON/OFF control of all 11kv panel at operator table with supply of good quality metal sheet box ( 18 SWG size 450 x 450 x 125 mm with door, 20 nos standard ISI make and rating industrial push botton, indication lamp(LED), terminal connectors fixed on c-type channel, etc. with installing accept/reset arrangement with required ISI marked copper flexible wire size 2.5 Sq. mm including complete wiring in PVC pipe and fixing on wall as per inst. of EIC.only 19/27 core x 2.5 sqmm cable supply by GETCO. 54 Providing and fixing of all weather proof, cold rolled sheet steel junction box for CVT & PT, CT terminations with 30 Nos. of disconnecting type, 'Elmex' make CATDM 4 or equivalent type connectors and required no of fuses, links etc.as per instruction of Engineer-in-charge, as per approved schedule of cable. 55 Providing & fixing of all weather proof, cold rolled steel sheet floor mounted fixed type single door grey color Main AC Dist box having size 900x600x250 MM with door closing arrangement and necessary rubber gasket. Contractor has to supply following materials with box along with necessary mounting and wiring. (1) L&T/Anchor/Havells Make 100A,4P MCCB - 1 No. (2) L&T/Anchor/Havells Make 63A,4P MCB - 2 Nos. (3) 100 A Copper Bus-Bar Link - length 6 inch size & 25 x 3 MM - 4 Nos. (4) Tinned Earth Bus 25 x 3 MM Length - 32 Inch - 1No. (5) 25 & 16 sqmm Cu. flexible cable - 4 & 8 Meter respectively. (6) Required Nos. of Cu. Lugs , etc. as per instruction of EIC. TOTAL - 2 ( SCHEDULE B - 2 ) SCHEDULE B - 3 : YARD LIGHTING Sr No Description of work/Supply 56 Providing & fixing of all weather proof, cold rolled sheet steel AC Panel - 2 for Yard-Light AC supply having (1) 63A 4P MCB : 01 No. (2) MCX-12A contactor : 01 No. (3) Digital Timer : 01 No. (4) 20A TPN MCB : 06 Nos (5) Indication lamp " 03 Nos (6) Push Butten : 02 Nos (7) Terminal Connector as per site requierment and other detail as per drawing enclosed including grouting & Necessary fabrication of GI Angle or fixing on GI Structure, including earthing with main grid as per instruction of EIC. 57 Supplying & laying of following size Control/ L.T. power cable in readymade cable trench or by excavating in any type soil cable trench size 300mm wide 600mm depth and refilling the same as per the direction of EIC. Item Includes the cable laying upto termination box with clamps & proper clamping of cable on gantries by GI pipe & glands as per direction. Item includes providing & supply of bircks, sand as per requirement. The L.T power cable to be provided by contractor as under :As per ISI 1554 (Part-I). 3.5 Core x mm2 Alluminium cable -Armoured, from distribution X'mer Main Distribution Board near dist. X'mer and from MDB indoor LT panel board (LTPB) - both 2 runs. 58 Supplying & laying of following size Control/L.T power cable of FINOLEX or equivalent ISI make in readymade cable trench or by excavating in any type of soil cable trench size 300mm wide and 600mm depth and refilling the same as per the direction of EIC. Item Includes the cable laying up termination box with clamps & proper clamping of cable on gantries by GI pipe & glands as per direction. Item includes providing & fixing of bricks, sand as per requirement protect cables . The L.T power cable to be provided by contractor as under :As per ISI 1554 (Part-I). 4 Core x 25 mm2 Aluminum cable -Armored, from LT panel board (LTPB) Yard Light AC MK (AC Panel-2)., AC Panel 1 in C.R. and yard AC Box 59 - - do - - 4C x 4mm2 Copper cable - Armoured, from yard-light AC MK (AC panel-2) to all yard-light fixture junction boxes on LM & street light light pole & Station transformer Colony & LT panel to watchman cabin. Note: Cable Laying work either in ready made cable Trench or by excvating in any type of soil if required.(Only laying. Cable will be supplied by GETCO) 60 - - do - - 4C x 2.5mm2 Copper cable - Armoured, from yard-light AC MK (AC panel-2) to all junction boxes on post top lantern. Note: Cable Laying work either in ready made cable Trench or by excvating in any type of soil if required.(Only laying. Cable will be supplied by GETCO) 61 Providing & fixing of 'B' class ISI marked GI. Pipe of 32/40mm dia for cable looping & road crossing with necessary elbow/ bend for each pole & J.Box for yard lighting & for control-room flood light wiring work with fixing on wall with shadles if required as per inst. Of EIC. Providing & erection of 7.0 Mtr. long swaged type welded GI tubular street light pole on the foundation in any type of soil as per inst. of E.I.C. confirming to relevent IS and as per atached Drawing No. GETCO/E/STD/LTG.POLE -R2, DT-24-12-2019 Providing & erection of 4.5 Mtr. long swaged type welded GI tubular post top lantern pole on the foundation in any type of soil as per inst. of E.I.C. confirming to relevent IS and as per atached Drawing No. GETCO/E/STD/LTG.POLE -R2, DT-24-12-2019 Supply and fixing of Pole/Wall/Structure mounted FRP junction box of any standard reputed make of required size with clamp, providing 1 SPN MCB, of 16 A having short ckt breaking capacity of 10kA peak of standard ISI make like L&T/ANCHOR/MDS /HAVELLS & 2 Nos. of stud type connector of standard make like Connectwell. The cable glands & lugs are also included for both incoming & out going cables Amp. of standard make like MDS/HAVELLS. Earthing to tubular pole/luminaries,by coil type earthing at 10 SWG, GI wire in earth pit of 1.5 mtr. Depth in any type of solil by using salt/ coke (charcole) 16 kgs each & remaining filling with yellow/ Normal soil & clamping the earth wire with pole & Junction box. Providing and fixing of Single Piece Cast Alluminium with full frame with Acrylic Cover integrated luminaries Energy Efficient flood light luminaries on swaged pole / GI structure by providing required fabrications, for 1 x 250 Watt LED fixture (CGL model no. TFS-526-250-57-60D-HL2-LM-NSG or Wipro model no. LF48-342-025-57-XX or Equivalent model no. from M/s Philips, Bajaj, GE etc.) with allied accessories such as Capacitor igniter, ballast, control gear box etc, 4 core 2.5 sqmm double insulated flexible stranded wire should be used from control gear fittings to approved SMC type junction box as per inst. of E.I.C. Providing & Fixing of LED Street Light Fixtures (1X120W) (CGL Cat No. LSTO120/CDL 120W or equivalent under Cat-II or above as per R&B SOR), 4-core 2.5mm2 double insulated flexible strended wire should be used from control gear fittings to approved SMC type junction box as per inst. of E.I.C. Providing & fixing of 1x40W LED Post Top Lantern fixtures (CGL Cat No. LPTO-40/CDL 40W or equivalent under Cat-II or above as per R&B SOR) complete fitting in all respect and 4 core x 2.5 mm2 double insulated PVC flexible copper cable from control gear fitting to SMC junction box as per instruction of E.I.C. TOTAL - 3 ( SCHEDULE B - 3 ) SCHEDULE B - 4 : CONTROL ROOM INDUSTRIAL ELECTRIFICATION Description of work/Supply 69 Providing and fixing of DBS as AC Panel - 1 for CR of ISI marked Powder coated Pearl DBS of ivory color , wall mounting, Double door Distribution board of L&T, Heggar or higher make fitted with 63Amp Phase Bus bar, Earth / Neutral Bars and inter connecting wires with removable bottom gland plates for all power cable entry from bottom with DIN Channel ,incoming contact and 1No. - 63Amp TPN MCB 'C' Series, 6Nos. - 20A SP MCB 'C' Series and 13Nos. -10A SP MCB 'C' Series All MCBs are L&T, Anchor or Higher make only. Complete in all respect and as per instruction of EIC. 70 Supplying & Laying Sub-main lines of 3X2.5 mm2 ( two for P & N and one for Earthing) copper PVC insulated wier of ISI brand in suitable standard make steel conduit pipe having minimum 1.5 mm thickness of approved brand with ISI brand with clmpes with it's associated accessories for various circuits amanating from AC panel 1.as per inst. of E.I.C. 71 Point wiring for control room tube lights, fans, exhaust fans, fency lights, water tight bulck head lights with PVC insulated 660 V grade standard copper wire in ISI make GI conduct pipe 20 mm dia and 1.6 mm wall thickness size fitted with sadles on the wall/ceiling. Size of wire shall be with 3C x 1.5 sq.mm PVC insulated copper wire for phase and neutral and earth wire [ Green] and 5 Amp Anchor/Roma or any equivalent switch as per specification with 16 guage M.S. box. The box shall be covered with 3 mm thick decorative mat finish hylum sheet. The work is all inclusive of supply and fixing of required materials as afore said [ like GI conduct pipe , sadles , swithces , Steel box , ceiling Rose , flexible copper wire etc] to complete point wiring with each fixture to be earthed by SWG-12 stranded copper conductor having green color as per direction and instructions of E.I.C. 72 Providing, fixing & termination for Emergency D.C. supply arrangment. This job includs supply & laying of 2C x 2.5 mm2 Copper arrmoured cable from battery charger to SBDC, fixing & providing SBDC & complete wiring with supply of wire & D.C. lamp (110V D.C., 100 watt-4 Nos.) in standard steel conduit pipe as per inst. of E.I.C. 72 Providing and Fixing points wiring in GI. Conduit size 20 mm dia and 1.6 mm wall thickness with single PVC insulated 2.5 Sqmm. copper wire of ISI standard good quality using 1.5mm thick suitable size ISI mark Anchor brand 15 Amp. 250 Volt, 5-pin plug socket as seperate plug point with shock proof accessories incl. indication lamp; erected on separate decorative mat finish hylum sheet board on wall with providing adequate green earthing wire as per specification and instruction of Engineer Incharge. 73 ---- Do ---- as above but with singal PVC insulated 3Cx1.5 sq. mm.copper wire of ISI mark plug socket for 5A domestic use separate plug point as per direction and instruction of E.I.C. 74 ---- Do ---- as above but looped on same board i.e. No separate board, plug socket for 5A domestic use as per direction and instruction of E.I.C. 75 Providing & Fixing of Ceiling Fan of 1400mm sweep Bajaj/Crompton / Orient/ usha / Cinni make (ISI approved). Fan is to be purchased from authorised dealer. Flexible wiring using twin core double PVC 48/0.2 mm copper flexible cord of suitable & approved make and size from ceiling rose upto fan terminal & supply and fixing of energy saver regulators, extra GI pipe of required size and length for lowering of fan if required as per instruction of EIC. 76 Providing & Fixing of 50 W LED Lighting Fixture (CGL Cat No. LCTLR-50-FO-CDL 50W or equivalent under Cat-II or above as per R&B SOR), 4-core 2.5mm2 double insulated flexible strended wire should be used from control gear fittings to approved SMC type junction box as per inst. of EIC. 77 Providing and fixing of 41.5W LED Lighting Fixture (CGL Cat No. LPFC-36-CDL 41.5W or equivalent under Cat-II or above as per R&B SOR) as per instruction of EIC. 78 Providing and fixing of 40W (1X4) LED Lighting fixtures as per drawing (in office area & Porch Area) (CGL Cat No. LCTLSN-40-CDL (1X4) 40W or equivalent under Cat-II or above as per R&B SOR) as per instruction of EIC. 79 Providing & fixing of 30W LED Street Light Bulkhead (CGL Cat No. LSTO-30-CDL 30W or equivalent under Cat-II or above as per R&B SOR) on out side C/R building and inside cable trench in C/R including wiring from ceiling rose to fixture with suitable size of PVC insulated ISI marked copper wire only as per Instruction of EIC. 80 Providing and fixing of heavy duty exhaust fan in battery room size 18" of Make GEC/KHAITAN/ CROMPTON/ BAJAJ incl. M.S. louver shutter of Fan & necessary wall finishing works and applying bird proof net on outside wall with required arrangement for rain water sealing and necessary conection from ceiling rose as per Direction and instruction of EIC. 81 Providing & Fixing of Electric bell with bell switch near officer's table. All materials must be ISI mark and approved by EIC. 82 Providing and fixing of 18W LED Lighting Fixture (CGL Cat No.. LCTL-18-CDL 18W or equivalent under Cat-II or above as per R&B SOR) as per instruction of EIC 83 Providing & Fixing of G.I. 1.5Mtr Long, 16MM Dia Lightning Rod (Spike) for Lightning Protection of Control Room Buiding as per Instruction of EIC as shown in Drawing No.. GETCO/E/STD/DSLP-66kV CR- R0 Dtd. 26.10.17 84 Providing & fixing of 50x6 mm GI Flat for Control Room DSLP Protection. The work is to be carried out as per Drg. No.. GETCO/E/STD/ DLSP-66kV CR, R0 dated:26.10.17 as per inst. of EIC. The rates are including fixing of clamps on wall which is to be fabricated from 50X6 GI Strip. 85 Providing & fixing of Wall Mounted Fan Crompton / Orient/ PSPO / Usha / Cinni (must be ISI approved). including wiring from ceiling rose to Fan terminals of by using twin core flexible PVC to PVC 48 / 0.2 mm copper cord of suitable & approved size & fixing of Fan regulator. 86 Cutting, uprooting and removing of grass, shrubs, bushes etc. from area as per priority given by E. I. C and also removing unwanted plants like Bordies, Ankdas, Nafatias, etc. to be excavated uproots. Also includes disposing of cut grass, shrubs and unwanted plants outside the premises of GETCO as per instructions of E. I. C. Scope included all tools and tackles, equipment, transportation, loading and unloading of cut grass. Nothing will be provided by GETCO. TOTAL - 4 ( SCHEDULE B - 4 ) SCHEDULE B - 6 : SUPPLY OF FURNITURE Sr No Description of work/Supply 87 Supply of Steel Chair 'S' type, overhanging arm with cushion with cane seat/ 1"x16" gauge round pipe frame complete as per instruction of EIC & procurement from Adult training center for blind,Ahmedabad as per Corporate office letter no. ACE(Proc)/V/Furniture/2016-17/2943 dt 1.3.17 & GOG Circular SPO/102015/691093/CH. 88 Supply of Steel Rack of size 36"x30"x12" (3' x 2.5'x1') with three partitions, prepared with 20 gauges as per instruction of EIC & procurement from Adult training center for blind, Ahmedabad as per Corporate office letter no. ACE(Proc)/V/ Furniture/2016-17/2943 dt 1.3.17 & GOG Circular SPO/102015/ 691093/CH. 89 Supply of Steel Table of size 54"x30"x30" (4.5' x 2.5' x 2.5') one side three drawers, one side shelf 1x18 gauge square pipe with Nova PAN Prelaminated top complete with locking arrangement to drawers & self as per instruction of EIC & procurement from Adult training center for blind, Ahmedabad as per Corporate office letter no. ACE(Proc) / V/ Furniture/2016-17/2943 dt 1.3.17& GOG Circular SPO/102015/691093/CH. 90 Supply of Computer Table from prelaminated board with Key board facility and drawer with locking facility with continuous printer out facility & mouse tray and also with special tray fo CPU & UPS having size 42''x24''x30'' complete as per instruction of EIC & procurement from Adult training center for blind, Ahmedabad as per Corporate office letter no. ACE(Proc)/V/Furniture/2016-17/2943 dt 1.3.17 & GOG Circular SPO/102015/691093/CH. 91 Supply of Steel revolving Chair, revolving & tilting, low back high type seat with foam rubber 3" in seat 2" in back with good quality raxine cover ,five legs. Chromium plated frame complete as per instruction of EIC & procurement from Adult training center for blind,Ahmedabad as per Corporate office letter no. ACE(Proc)/V/Furniture/2016-17/2943 dt 1.3.17 & GOG Circular SPO/102015/691093/CH. 92 Supply of Steel Cupboard , of size 78"x36"x18" four partition, door & Shelves 20 gauge complete as per instruction of EIC & procurement from Adult training center for blind, Ahmedabad as per Corporate office letter no. ACE(Proc)/V/ Furniture/2016-17/2943 dt 1.3.17 & GOG Circular SPO/102015/ 691093/CH.
|