|
Air Conditioning (12,000 Btus) - Air Conditioning, Classified As A Permanent Asset, Is An Essential Air Conditioning System For The Healthcare Environment. The Equipment Must Be Of The Split System Type, Intended For Wall Installation, And Composed Of Two Units: An Internal Evaporator Unit And An External Condensing Unit, Both Designed For Continuous Hospital Use. The Required Nominal Capacity Is 12,000 Btu/H, With Cold/Refrigeration Cycle. It Is Mandatory That The Model Has High Energy Efficiency, With The Procel A Seal And, Preferably, Inverter Technology, To Guarantee Maximum Savings In Electrical Energy Consumption And Temperature Stability. The Device Must Have A Low Noise Level, A Washable And Removable Air Filter, And Must Operate On Bivolt Voltage. A Minimum Warranty Of 12 (Twelve) Months Is Required Against Manufacturing Defects. Electric Drinking Fountain - The Electric Drinking Fountain Is Intended To Provide Drinking Water At An Appropriate Temperature For Patients And Servers In Waiting And Service Areas. The Equipment Must Be Of The Column Type And Designed For Use With 10 Or 20 Liter Gallons Of Mineral Water, Guaranteeing Continuous Hospital Use. It Must Have At Least Two (02) Taps (One For Natural Water And The Other For Cold Water), Made Of Resistant And Easy-To-Clean Material, With A High-Efficiency Electrical Refrigeration System. It Is Mandatory That The Model Has A Low Energy Consumption Seal (Procel A Seal Or Equivalent) And That The Cold Water Reservoir Is Made Of Stainless Steel (Aisi 304 Or Higher), Food Grade, Resistant To Corrosion. The Equipment Must Be Compatible With Inmetros Electrical Safety Standards And Have A Minimum Warranty Of 12 (Twelve) Months Against Manufacturing Defects., Chair On Stringer - 3-Seater Stringers In Stainless Steel - Material: Structure In Stainless Steel Aisi 304 Or Higher; Load Capacity: Minimum 300 Kg; Individual Backrests With Perforated Steel Structure, Without Coating; Individual Seats With Perforated Steel Structure, Without Covering; Chromed Steel Arm With Anatomical Shape; Fixed Y-Shaped Base Made Of Chrome Steel With Four Shoes Modular System For Easy Maintenance; Polished, Corrosion-Resistant Finish; Minimum Warranty: 12 Months., Auxiliary Dressing Trolley - The Auxiliary Dressing Cart Is A Permanent Piece Of Equipment, Used Intensively And Fundamentally In Procedure Rooms, Designed To Transport And Store Materials And Supplies For Carrying Out Dressings, Minor Surgeries And Outpatient Procedures. The Structure Must Be Manufactured In Stainless Steel Aisi 304 Or Higher, Guaranteeing Maximum Resistance To Corrosion, Humidity And Disinfectant Agents Used In The Hospital Environment. The Trolley Must Have Two (02) Or Three (03) Flats (Trays/Shelves), Smooth, Without Recesses And Removable, Which Allow Easy And Complete Asepsis. It Is Mandatory That The Equipment Is Equipped With Four (04) Swivel Casters Of At Least 3 (Inches), Of Which At Least Two (02) Must Have Locks Or Brakes That Can Be Easily Operated. Optionally, A Drawer Can Be Included On The Top (With Telescopic Slides And Ergonomic Handle) And A Side Handle To Facilitate Transport. The Dimensions Must Be Compatible With Circulation In Corridors And Procedure Rooms In Hospital Environments. A Minimum Warranty Of 12 (Twelve) Months Is Required Against Manufacturing Defects
|
