|
Local Administration*, Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 1.50M - 2 Uses. Af_03/2024, Supply And Installation Of Workplate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Construction Shed, Made Of Resin Plywood, Including Sanitary Facilities And Furniture - Der-Mg Standard, Sewage Connection To Construction Shed On Site, Excluding Septic Tank, Construction Shed For Deposit And Type-I Tooling, Internal Area 14, 52M2, Including Furniture (Work Of Small Size, Effective Up To 30 Men), Der-Mg Standard, Temporary Water Connection For Site, Including Hydrometer And Easel For Water Measurement - Main Entrance, In Galvanized Steel Dn 20Mm (1/2) - Concessionary Standard, Temporary Connection With Air Power Input, Cemig Standard, Installed Load From 15, 1Kva To 30Kva, Three-Phase, With Output Underground, Including Pole, Meter Box, Circuit Breaker, Bus Bar, Grounding And Accessories, Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placement Of Formwork). Af_01/2024, Mechanical Soil Compaction For Execution Of Radier, Concrete Floor Or Slab On Soil, With Percussion Soil Compactor. Af_09/2021, Separator Layer For Radier Execution, In Plastic Canvas. Af_09/2021, Ballast With Granular Material (Crushed Stone N.2), Applied On Floors Or Slabs On Ground, Thickness Of *10 Cm*. Af_01/2024, Manufacture, Assembly And Disassembly Of Formwork For Radier, In Sawn Wood, 4 Uses. Af_09/2021, Slab Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10.0 Mm Ca-50 Steel - Assembly. Af_06/2022*, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-60 5 Steel, Radier Concreting, Fck 30 Mpa - Laying, Thinning And Finishing. Af_09/2021, Manual Trench Backfilling, With Percussion Soil Compactor. Af_08/2023, Surface Waterproofing With Polymeric Mortar / Acrylic Membrane, 3 Coats. Af_09/2023, Polyester Veil For Waterproofing, Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot, Made Of Resin Plywood Sheet, 8 Uses. Af_09/2020, Assembly And Disassembly Of Beam Formwork, Without Propping, Made Of Resin Wood Sheet, 8 Uses., Propping With Wooden Fork, 0 Mm - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6-Inch Ca-50 Steel, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8-Inch Ca-50 Steel, Unidirectional Precast Slab, Double Supported, For Flooring, Ceramic Filling, Conventional Joist, Total Slab Height (Filling+Cover) = (8+4). Af_11/2020, Concreting Of Pillars, Fck = 20 Mpa, Using Buckets - Launching, Densification And Finishing., Concreting Of Beams And Slabs, Fck=20 Mpa, For Any Type Of Slab With Buckets In A Single-Story Building - Launching, Masonry For Sealing Horizontally Drilled Ceramic Blocks Of 9X19x19 Cm (Thickness 9 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Lintel Cast In Situ In Concrete, Thickness Of *10* Cm. Af_03/2024, Framed In-Situ Concrete Reverse, Opening Aluminum Door With Paneling, With Trim, Fastening With Screws - Supply And Installation.
|
