Tender For Provide Of Sports Equipment And Open Gym Work. in India

Work Detail

Tender For provide of sports equipment and open gym work. Leg Press : Area :- 0.40X1.77 Mtr Safe Area :- Providing And The Center P The Bottom Support Thickness Is Welded The Remaining Outer Frame Pipe. The Foundation Used For ? 80Mm Made From "C" C & 10 Mm Thickness, 25Mmx25mm. To Join The C 3Mm Thicness Is Used. The Seats Are Size 330Mmx3mm And Size 250Mmx 200Mm. The Footrests Is Made 130Mmx311.77 Mtr.-1X2.38Mtr. Fixing Leg Press Made From "B" Class G.I. P Pipe Is Of ? 115Mm Made From "C" Class G.I. Of M.S. Round Plate Of ? 250Mm & At Bottom. Is Of ? 40Mm Made From "C" Class G.I. Foundation Fixing Is Consist Of Three Equal Class G.I. Pipe, M.S. Round P X 3Mm M.S. Angle. Centre Pipe & Outer Frame Seamless Pipe Of Thickness Fitted On The Outer Frame Is Made Up Of Frp Material Of 300Mm Of Thickness 3Mm & M.S. Plate Of Is Used To Support It. From Aluminum Casting Material, I 10Mm & 5Mm Thickness. Pipe, Made Pipe And 250Mm, 10Mm Items I.E. Plate Of ? 250Mm Angle. ? 120Mm & Thickness 5 Support Its Sizes Are The Frame Of Footrests Consists Of ? 32Mm Made From "C" Class G.I. Pipe. Closing Caps Made From Top Quality Frp Material Which Is Of 2 Mm Thickness. The Inner Bushes Is Made From Seamless Pipe, Its Diameter Is 60Mm & 5Mm Thickness. The Pins Used In Are Made Up Of ? 25 Mm Hardened Bright Bar, The Bearings Used Are Of "6205Zz" Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). The Handles Used Are Of Rubber Grip. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. The Serclips Used For Assembly Are Of ? 25 Mm. The Powder Coat Is Done By Poly Urethane & Exoxy Powder With 60 To 70 Micron Thickness. , Sky Walker : Area : - 1.72 Mtr X 0.63 Mtr Safe Area :- 2.54 Mtr X 1 Mtr Providing And Fixing Sky Walker Made From "B" Class G.I. Pipe. The Main Frame Pipe Is ? 80Mm Made From "C" Class G.I. Pipe. The Outer Ring Of Sky Walker Is ? 32Mm Made From "C" Class G.I. Pipe. For Connecting The Handle Frame To Main Pipe ? 60Mm "C" Class G.I. Pipe Is Used. The Bottom Support Of M.S. Round Plate Of ? 250Mm X 10Mm Thickness Is Welded At Bottom. The Leg Movement Frame Is Of 50X50mmx2mm Thick Crc Square Pipe. The Handle Frame Is Of ? 40Mm Made From "C" Class G.I. Pipe. The Foundation Used For Fixing Is 80X40mmx3mm Thickness C-Channel. The Footrests Is Made From Aluminum Casting Material, Its Sizes Are 130X310x5mm. Closing Caps Made From Top Quality Frp Material With 2Mm Thickness & Plastic Cap Are Used. The Pins Used Are Made Up Of ? 25Mm Bright Bar. The Bearings Used Are "6205Zz" & "6203Zz" Permanent Lubricated Sealed Bering Of Reputed Make (Skf/Fag). High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. The Serclips Used For Assembly Are Of ? 25Mm. The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness , Chest Press Providing And Fixing Of Chest Press Of Size Not Less Than 2200Mm (Length) X 800Mm (Width) X 2000Mm. (Height), To Enhance The Strength Of Upper Limbs And The Muscles In Chest & Back And Promote Cardio Pulmonary Function. The Main Structure Frame Shall Be Made From G.I. Pipe Minimum Of 100Nb “C” Class Welded With M.S. Round Base Plate At Least Ø250 Mm & 10Mm Thick. The Handle Frame Shall Be Made Up From At Least 32Nb “C” Class G.I. Pipe. The Seats And Back Rests To Be Fitted On The Outer Frames Shall Be Made Up Of M.S. Sheet Of Size Not Less Than 330Mm X 300 Mmx2mm Thickness. Closing Caps Shall Be Made Up Of Lldpe/High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nuts & Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders From Ackzonoble/ Berger/ Nerolac Paints With 60 To 70 Micron Thickness Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In-Charge To Fulfill The Functional Requirement. , Arm Wheel Providing And Fixing Arm Wheel In A Pair With Below Specifications:- Dimensions (Lx W X H): 850 X 800 X 1800Mm. Fabricated With Main Post Of Nb 100Mm (G.I) ‘B’ Class Pipe Of Approved Make. Main Frame Of Nb 32Mm (G.I) ‘B’ Class Pipe. (‘Nb’ Stands For Nominal Bore I.E., Internal Diameter Of Pipe In Millimetres). All Pipes Are Powder Coated With 80-120 Micron Thick Akzo Nobel Or Equivalent Paints. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. Base Plate Cover Made Of Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00Mm Thickness, Uv Resistant And Coloured. Seat To Be Made Up From Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00Mm Thickness,Coloured, Uv Resistant And Environmental Friendly. Maintenance Free Bearings Of Skf Or Equivalent Make Duly Oil Sealed And Self-Lubricated Are Used In The Equipment Manufactured The Equipment Is Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shaped Welded Bolts Of 18Mm Thickness. Once The Concrete Is Set, The Equipment Is Fixed On To It And Nuts And Bolts Are Covered With Base Plate Cover. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. Barcode On Machine To Show The Proper Use Of Machine. , Triple Standning Twister Providing And Fixing Triple Twister With Below Specifications:- Dimensions (Lxwxh): 1700X1300x1300mm. Fabricated With Main Post Of Nb 100Mm (G.I) ‘B’ Class Pipe Of Approved Make. Main Frame Of Nb 32Mm (G.I) ‘B’ Class Pipe. Handle Frame Support Of Nb 32Mm (G.I) ‘B’ Class Pipe. (‘Nb’ Stands For Nominal Bore I.E., Internal Diameter Of Pipe In Millimetres). Foothold Plate Of Made Of Cost Iron Of 12Mm Thickness. All Pipes Are Powder Coated With 80-120 Micron Thick Akzo Nobel Or Equivalent Paints. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. Maintenance Free Bearings Of Skf Or Equivalent Make Duly Oil Sealed And Self-Lubricated Are Used In The Equipment Manufactured. The Equipment Is Fixed On Ground With Concrete Of Minimum Strength M-25 And Expansion Bolts. Once The Concrete Is Set, The Equipment Is Fixed On To It. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. Barcode On Machine To Show The Proper Use Of Machine. , Double Arch Swing: In This Two Children Can Enjoy The Swing At One Time.The Arch Shaped Side Frame Is Made Of 65Mm Nb B Class Gi Pipe And Top Pipe Is Made Up Of 50Mm Nb B Class G.I. Pipe.The Frame Is Powder Coated To Give An Aesthetic Look.The Swing Is Made Up Of 5Mm Thick Anti Skid Canvas Top. The Rubber Belt Seat Is Suspended On 6Mm Rubber Coated Gi Chain. The Ball Bearings Shall Be Mounted Inside A Specially Designed Nylon Clamp. , Doubleseesaw: Providing And Fixing Of Double See Saw Of Height 0.5 Mtr From Ground Level.Seat Frame And Base Should Be Made With 50 Mm Nb ‘B’ Class G.I. Pipe. Handle Pipe Should Be 25 Mm Nb ‘B’ Class G.I.Pipe.Length Of See Saw Lever Should Be 6 Feet. Seats Are Made With Frp/Lldpe. Max. 4 Children Can Play At One Time. , Spiral Slide : The Chute Of The Spiral Slide Is Made Of Frp (Fibre Reinforced Plastic) Having Thickness Of 4Mm. Slide Centre Support Shall Be 80Mm Nb B Class Gi Pipe. Landing Module Shall Be Supported By 20Mm Nb B Class Gi Pipe. Slide Extension Platform Is Made From Frp(Fibre Reinforced Plastic). The Laddermain Frame Is 25 Mm Gi Pipe.The Railing Shall Be Made From15 Mm Nb And 20 Mm Nb B Class Gi Pipe. All Pipes Are Powder Coated To Avoid Rusting. , Chair Merry Go Round Product Area: Minimum 2100 Mm Diameter. Safe Play Area: Minimum 3700 Mm Diameter. The Arm Is Made Up Of Minimum 40 Nb &Minimum 20 Nb Gi B-Class Pipe. Stand Is Made Up Of Minimum 80 Nb Gi B-Class Gi Pipe.The Arm Is Mounted On Heavy- Duty Bearing Shaft Permanently Lubricated With Water Sealant. Character – Plastic Elephant Or Any Other Character Is Made Of Lldpe Plastic With Rotational Moulding Process. It Has Inbuilt Handle, Seat Rest & Back Rest. , Roller Slide Roller Slide Its Required Area 4.6 Mtr X 0.9 Mtr Platform Height Should Be 5’ From Ground Level. Platform And Ladder Should Be Made By 32Mm Nb And 25 Nb And 20Mm Nb Pipe Gi Pipe. Roller Should Be Made With Virgin Lldpe. Slide Length 10’ All Components Paint By Pu Paint. , 2 Seater Spring Rider Dinosaur:- Product Area: Minimum 1500 Mm X 350 Mm. Safe Play Area: Minimum 2400 Mm X 1250 Mm. Spring Assembly Is Made Up Of Square Plates & Compression Spring. Two No’S Compression Spring Is Made Up Of Minimum 20 Mm Dia Wire, Spring Dia Is Minimum 150 Mm And Height Is 300 Minimum. Stand Is Made Up Of Minimum 40 Nb G.I. Pipe. Plate Is Welded On It To Fix Plastic Character On It Firmly Character – Plastic Character Is Made Up Of Lldpe Plastic With Rotational Molding Process. Length Of Character Is Minimum 1700 Mm Long. It Has Inbuilt Handle And Foot Rest Two Children Can Sit On Rider At A Time. The Character Should Be An Attractive Animal / Bird In Vibrant Colour.

Contact Information