|
Nlgi 2 High Performance Lubricating Grease, For Low Speeds And High Loads, For Bearings, Composition: Synthetic Hydrocarbon Oil And Silicate, Similar Or Superior; Characteristics: Base Oil Viscosity: 1,300Mm²/S At 40 C, 100Mm²/S At 100 C, According To Din 51 562 T1 Standards; Viscosity Degree: Nlgi 2 Consistency, According To Din 51 818 Standard; Pasty Appearance, Beige Or White Color; Density, Din 51 757, At 20 C: Approximately 0.99 G/Cm³; Working Penetration Din Iso 2137 (0.1 Mm), 25 C: 265 - 295; Drop Point (C) ≫ 200 C, According To Din Iso 2176; Working Temperature: Approximately From -10 C To 190 C, According To Din 51 805 - Min. Din 51 821/2 - Max.; Additional Information: For Use In Extreme Working Conditions - Continuous Operation Of 2,000 Hours, For Low Speeds And High Loads; Speed Characteristic Value: Approximately 3,000 Rpm; Validity: Minimum 24 Months; Packaging: 1 Kg., Nlgi 1 High Performance Lubricating Grease, Composition: Synthetic Hydrocarbon Oil And Aluminum Complex Soap, Similar Or Superior; Characteristics: Base Oil Viscosity: 30Mm²/S At 40 C, 6Mm²/S At 100 C, According To Standards Din 51 562 T1, Astm D-445, Astm D-7042, 40 C; Viscosity Degree: Consistency Nlgi 1, White Color; Density At 20 C: Approximately 0.9 G/Cm³; Working Penetration Din Iso 2137 (0.25 C: 310 - 340; Dropping Point (C) ≫= 220 C, According To Din Iso 2176 Standard; Working Temperature: Approximately From -45 C To 120 C, According To Din 51 805 - Min. Din 51 821/2 - Max.; Additional Information: For Use In Extreme Working Conditions - Continuous Operation Of 250 Hours; Characteristic Speed Value: Approximately 5,000 Rpm; Validity: Minimum Of 24 Months; 5(Ep); Viscosity At 40C (Cst): 233; Viscosity At 100C (Cst): 19.9; Viscosity Index: 98; Mineral Lubricating Oil With Additives Extreme Pressure For Reducers And Closed Gears In Severe Services Under High Loads; Anticorrosive, Antifoam, Antioxidant, Pour Point Lowering And Extreme Pressure Agent Requirements; Flash Point: 258 C; Pour Point: -18 C; Viscosity At 40C: 156 Cst; Viscosity At 100C: 100; Lithium; Nlgi Grades 2; Must Meet Din 51825; Worked Penetration 60X, Min (Astm D 217), (0.1Mm) 280; Extra Against Wear, Corrosion And Water Washing; Basic Oil Viscosity At 40ºc (Astm D 445), Cst 160; Industrial Use For Metalworking, Bearings, Sliding Surfaces; Sliding Bearings, Gears, Spherical Joints, Rolling Bearings, Mechanical Equipment; Minimum Validity 48 Months;
|
