|
Led Public Luminaire With A Maximum Power Of 50W, With Lower Power Luminaires Being Permitted, As Long As They Fully Meet The Luminous Flux Required In The Notice. Smd (Surface Mounted Diode) Led Technology; Energy Efficiency 150 (Lm/W); Power Factor 0.92; Total Harmonic Distortion (Thd) 20; Dps Surge Protector, Class Ii Or Higher, External To The Driver, 10Kv And 10Ka. Useful Life Equal Or Greater Than 60,000 (Six-Ta Thousand) Hours, (L70); Voltage Range From 90 To 305Vac; Driver Built-In Internally To The Luminaire, Dimmable Using The Standard: 0-10V. Color Temperature4,000K To 5000K, With Acceptable Variation /- 10; Color Rendering Index 70; Powers From 30W To 250W. Mechanical Characteristics: Minimum Mechanical Protection Ik08 (Degree Of Protection Against Impact); Degree Of Protection At Minimum Ip-66 (Ingress Protection); En-Side Box For Arm Ø33.5Mm, Ø48mm And Ø60.3Mm; Fastening Screws In Stainless Steel Or Galvanized; Electrostatic Painting With Polyester Powder Paint In Gray, With Uv Protection; Have A Standard 5-Pin Or Higher Socket On Its Top. Inmetro Certificate., Public Led Luminaire With Maximum Power Of 100W, Luminaires With Lower Power Being Permitted, As Long As They Fully Meet The Luminous Flux Required In The Notice. Smd (Surface Mounted Diode) Led Technology; Energy Efficiency 150 (Lm/W); Power Factor 0, Class Ii Or Higher, 10Kv And 10Ka. Useful Life Equal Or Greater Than 60,000 (Sixty Thousand) Hours, (L70); Voltage Range From 90 To 305Vac; Driver Internally Built Into The Luminaire, Dimmable Using The Standard: 0-10V. Color Temperature 4,000K 5000K, With Acceptable Variation /- 10; Color Rendering Index 70; Powers From 30W To 250W. Mechanical Characteristics: Minimum Mechanical Protection Ik08 (Degree Of Protection Against Impact); Degree Of Protection At Minimum Ip-66 (Ingress Protection); Side Fitting For Ø33 Arm, Led Public Luminaire With Maximum Power Of 200W, As Long As They Fully Meet The Luminous Flux Required In The Notice. Smd (Surface Mounted Diode) Led Technology; Energy Efficiency 150 (Lm/W); Power Factor 0.92; Total Harmonic Distortion (Thd) 20; Dps Surge Protector, With Acceptable Variation /- 10; Color Rendering Index 70; Powers From 30W To 250W. Mechanical Characteristics: Minimum Mechanical Protection Ik08 (Degree Of Protection Against Impact); Degree Of Protection At Minimum Ip-66 (Ingress Protection); Side Fitting For Ø33.3Mm Arm; Fastening Screws In Stainless Steel Or Galvanized; Electro-Tactical Painting With Polyester Powder Paint In Gray Color, With Uv Protection; Have In Its Upper Part A Standard Socket 5 Pins Or Higher. Inmetro Certificate., Ornamental Iron Arm 3 Mts, Arm, Simple Curved Arm For 2 Meter Luminaires With A Minimum External Diameter Of 30Mm, 13/02/2026 - 13:50:28, Swan Curved For Public Luminaires, 2.5M With A Minimum Of Diameter 30Mm, Square Head Screw (Machine) 16X200mm Hot Dip Galvanized Steel, With M16 Nut, Square Head Screw (Machine) 16X250mm Hot Dip Galvanized Steel, Square Head Screw (Machine) 16X300mm Hot Dip Galvanized Steel, Hot Dip Galvanized Square Washer 5/8 Or 16Mm, Photoelectric Relay Rm10 Plus 220 V, 50/60Hz Tw., Socket For Bivolt Photoelectric Relay (Relay Base), Multiplexed Copper Cable 1.5 Mm, Perforating Derivation Connector Cdp Piranha Bat Vampire 10Mm To 95Mm
|
