|
1.1 Local Administration, 2.1 Supply And Installation Of Workplate With Galvanized Sheet And Wooden Structure. Af032022ps, 2.2 Conventional Location Of Work, Using Template Of Pointed Running Boards Every 1.50M - 2 Uses. Af032024, 3.1 Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader Including Excavation For Placement Of Formwork. Af012024, 3.2 Preparation Of Trench Bottom Width Less Than 1.5 M Adjustment Of Natural Soil. Af082020, 3.3 Slim Concrete Ballast, Applied To Crowning Blocks Or Footings, 5 Cm Thick. Af012024, 3.4 Manufacture, Assembly And Disassembly Of Shoe Formwork, Made Of Resin Plywood Sheet, E17 Mm, 4 Uses. Af012024, 3.5 Insulated Shoe Frame, Baldram Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af012024, 3.6 Insulated Shoe Frame, Baldram Beam And Running Shoe Using 8 Mm Ca-50 Steel - Assembly. Af012024, 3.7 Insulated Shoe Frame, Baldram Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af012024, 3.8 Concreting Of Footings, Fck 20 Mpa, Using Jerica - Laying, Densification And Finishing., 3.9 Manual Backfilling Of Trenches, With Vibrating Plate. Af082023, 4.1 Manual Excavation For Baldrame Beam Or Running Footing Including Excavation For Placement Of Formwork. Af012024, 4.2 Slim Concrete Ballast, 4.3 Manufacture, Assembly And Disassembly Of Formwork For Baldrame Beam, In Sawn Wood, E25 Mm, 4.4 Insulated Shoe Frame, 4.5 Insulated Shoe Frame, 4.6 Concreting Of Crowning Block Or Baldrame Beam, 5.1 Plaster Applied To Masonry And Internal Concrete Structures, With Trowel. Mortar Trace 1:3 With Manual Preparation. Af102022, 5.2 Surface Waterproofing With Cement Mortar And Sand, With Waterproofing Additive, And 1.5Cm. Af092023, 5.3 Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af092023, 6.1 Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot, 8 Uses. Af092020, 6.2 Assembly And Disassembly Of Beam Formwork, Without Propping, In Resin Wood Sheet, 8 Uses., 6.3 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af062022, 6.4 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3Mm Ca-50 Steel - Assembly. Af062022, 6.5 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8 Ca-50 Steel, 6.6 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10 Ca-50 Steel, 6.7 Unidirectional Precast Slab, Bi-Supported, For Floor, Ceramic Filling, Conventional Joist, Total Slab Height Filling+Cover 8+4. Af112020, 6.8 Concreting Of Pillars, Using Buckets - Laying, Densifying And Finishing. Af022022, 6.9 Concreting Of Beams And Slabs, Fck20 Mpa, For Any Type Of Slab With Buckets In A Single-Story Building - Launch, 7.1 Masonry For Sealing Horizontally Drilled Ceramic Blocks Measuring 9X19x19 Cm, 9 Cm Thick And Laying Mortar Prepared In A Concrete Mixer. Af122021, 7.2 In-Situ Cast Concrete Girder, 0100 Cm Thick. Af032024, 7.3 Contraverga Molded In Place In Concrete, 8.1 Sliding Aluminum Window With 2 Panes For Glazing Glass Included, Frame Frame 6 To 14 Cm, Acetate Or Glossy Finish, Screw Fastening, Without Alizar Trim, Dimensions 100X120 Cm, Silicone Sealing, Ex
|
