Tender For Stage Contract During Yatra 2026. in India

Work Detail

Tender For Stage Contract During Yatra 2026.- 1 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed,( All kinds of Soil) 2 P/L, of dry stone soling duly hand packed for foundation and backfilling with ramming, dressing,and compacting all inclusive leads, lifts, loading, un-loading,cost and carriage of material involved complete. 3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl. carriage complete. 4 P/L, in position reinforced cement concrete of specified grade excluding the cost of centering & shuttering.in 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate of 20 mm Nominal size Crushed upto Floor V- level in Beams, Columns, Slabs, pedastal all complete. 5 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl. carraige complete. 6 Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 7 Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms. 8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. 9 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) incl. Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level complete. 10 12mm cement plaster of mix 1:4 (1cement: 4 fine sand) allcomplete. 11 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)complete. 12 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick all complete. 13 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate incl. carriage complete. 14 P/F 35mm thick Glazed shutters for doors, windows and Clestory Windows using 10kg/sqm (4mm thick) float glass panes including ISI MarkedM.S Pressed Butt Hings bright finished of required size withnecessary screws, beadings all complete (Imported Wood) 15 Providing and fixingof 35mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63mm forwindows and CSW with hinges and screws of aluminum sectionsincluding ISI MarkedM.S Pressed Butt Hings bright finished of required size withnecessary screws. (Imported Wood). 16 Providing and fixing of panelled or panelled and glazed shutters for doors fixing with butt hinges of required size with necessary screws including panelling with prelaminated board with lamination on both sides all complete as per the directions of Incharge Engineer. (35mm thickImported Kail Wood). 17 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 18 Providing and fixing of aluminuim hardware fittings for doors, windows of approved brand of required colour shade and patern with necessary nails, screws etc. complete. 19 Handles 100mm 20 Handles 250mm 21 Tower Bolts 100mm 22 Tower Bolts 150mm 23 I-Hooks 24 L-Drop 250mm 25 Door Stopper 26 Distempering with oil bound washable distemper of approved brand and manufecture to give an even shade (New work) Two or more coats. 27 Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm 28 Providing and laying of marble stone flooring 18mm thick over laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base mortar 1:4 mix (1 cement: 4 coarse sand) complete. 29 Providing and fixing 3.5mm thick glass panes to windows shutters including wooden beading of required size and section with necessary nails etc. complete. 30 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 31 Providing & fixing colour coated (Hi-Rib) G.I sheet roofing 0.50mm thick incl. vertical/curved surface fixed with polymer coated J or L hooks bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washer and over lapping of sheets complete in horizontal vertical trusses incl. cutting to size and shape wherever required. 32 Providing/Fixing of Ridges/Hips with 60cm over all width in Plain G.Ssheets 0.50mm thick fixed with Polymer J or L hooks, Bolts, Nuts 8mm dia G.I limpet and bitumen washers etc as per the directions of Engineer Incharge incl. all carraiges complete. 33 Providing/Fixing Valleys of 90cm width overall in Plain G.S sheets fixed with Polymer J or L hooks, Bolts, Nuts 8mm dia G.I limpet and bitumen washers etc complete. 34 Proving and fixing of 2mm thick C.R sheet for Eves Boardingover angle iron frame work 25x25x4mm incl. cost of welding cutting and scafholding etc including priming and paintingall complete. 35 Proving and fixing of 2mm thick C.R sheet for Soffits over angle iron frame work 25x25x4mm incl. cost of welding cutting and scafholding etc including priming and paintingall complete. 36 Providing and fixing 1st quality ceramic glazed Wall/Floor Tiles of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Including cost of all material, with its leads, lifts and carriages etc upto site of work complete. 37 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, 38 Providing and fixing of PVC water storage tankof approved brand and manufacture with its fittings leads, lifts, handling, re handling & carriage upto site of work complete. 39 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 40 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. 41 Providing and fixing of PVC pipes/Fixtures of approved quality and make( prince B type) incl. all necessary fittings complete. 150mm dia Pipe 42 100mm dia Pipe 43 75mm dia Pipe 44 50mm dia Pipe 45 Floor Trap 100/50/75mm 46 Door Junction 100/50/75mm 47 Door Tee 100/75/50mm 48 PVC Cowel 49 P-Trap 100/75/50mm 50 PVC Tanky Lid 51 Providing and fixing of C.P fittings of approved quality and brand with all fixtures complete.Angle Valve 15mm 52 Bib Cock 15mm 53 Wall Mixer 54 Wash Basin Mixer 55 Sink Mixer 56 Stainless Steel Soap Case 57 Stainless Steel towel Rail (600mm) 58 Steel Grattings for Bathroom 59 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.White glazed fire clay kitchen sink of size 600x450x250 mm 60 looking Mirror (2x3-0") 61 CP Ball Value 62 CP Health Fuccit 63 CP Towel Rod 64 CP Towel Ring 65 PVC Main Hole Cover of required size. 66 Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS :7231, with all fittingsand fixtures complete: 10 liter capacity White 67 PVC Connection 68 C.P Grattings 69 Soap Dispenser 70 Providing and fixing wash basin white vitreous china of required standard quality Cera, Parrayware, Hindware with C.I/MS brackets with padestal incl. all necessary fittings complete.20mm dia Nominal bore 71 Providing and fixing G.I pipes/G.I fittings of approved brand and quality incld. Cutting and making good the walls complete. 20mm dia Nominal bore 72 15mm dia Nominal bore 73 Socket of required dia 74 Elbow of required dia 75 Tee of required dia 76 Plug of required dia 77 Tanky Nipple of required dia 78 Reducer of required dia 79 Construction of brick masonary man hole in cement mortar cement concrete 1:2:4 mix, foundation concrete 4” thick 1:4:8, inside plastering 12mm thick in cement mortar 1:3, 50mm thick cement concrete flooring with floating coat fixed with PVC man hole cover with frame of reqiured size all inclusive leads, lifts, loading, unloading cost & carriage of all materials involved complete. Size(900x900x480 mm) with PVC Cover. 80 Construction of brick masonary man hole in cement mortar cement concrete 1:2:4 mix, foundation concrete 4” thick 1:4:8, inside plastering 12mm thick in cement mortar 1:3, 50mm thick cement concrete flooring with floating coat fixed with PVC man hole cover with frame of reqiured size all inclusive leads, lifts, loading, unloading cost & carriage of all materials involved complete. Size(480x480x480 mm) with PVC Cover. 81 Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per directionof Engineer-inCharge.18 mm thick 82 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. 83 Providing and fixing 25 liter capacity water heater Gyser of approved brand of Venus/ Recold including its fixing at desired position complete in all respects. 84 Providing and fixing 50 liter capacity water heater Gyser of approved brand of Venus/ Recold including its fixing at desired position complete in all respects. 85 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm 86 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work 87 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix) 88 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . (This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of alljoints, corners, junctions of pipes and masonry with polymer mixed slurry) 89 P/F of Flusing kit complete in all respects in PVC Flush Tanks (Compact one) incl. replacing old damaged kit and making connection with water supply (Flushing Kit of standrad make). 90 P/f of brass spindle (heavy type) for mixer, bib cocks and angle valves of standard make incl. removing of old damaged one. 91 P/F of PVC Tank lids with locking arrangement complete in all respects to 1000 Ltrs/2000 ltrs/5000 ltrs capacity (Overhead PVC tanks in attic floor). 92 P/F foam insulation 8mm -10mm thick of standard make to G.I water circulation/distribution net work incl. wrapping of foam insulation with polythene sheets complete job 93 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge:1:4:8 or leaner mix (i/c equivalent design mix) ) 94 Providing and fixing of P.P.R 3 layer pipe in all P.P.R plain and brass threaded fittings incl. cost of fixing the pipes with clamps at 1.0 spacing incl. cost of cutting chases and making good the sameand testing of joints complete 20mm dia nominal bore 95 25mm dia nominal bore 96 15mm dia nominal bore 97 40mm dia nominal bore 98 Providing and installation of electric motor of 1.00 hp including all leads, lifts, carraige complete. 99 Engagement of skilled/inskilled Labours with all equipments required. Carpenter 100 Plumber 101 Labour (unskilled) 102 Black Smith 103 Electrician 104 Servicing of exisitng AC's incl. filling of gas all complete job as required. Payments shall be made as per actualagainst authenticated voucher) 105 P/F electric items of approved brand and manufacture incl. all necessary fittings/fixtures incl. wire etc complete cutting of walls, making of holes incl. necessary repairs whereever necessary complete. Heating Point 106 Lighting Point 107 Fan Point incl. Ceiling Fan 108 Conceiled Light (Led) 6" 109 Switch/Sockets 110 Led Bulb 111 TPN (4 Pole MCB) 112 MCB 32 Ampr. 113 SS combine 114 2.5sqmm wire 115 Supply of following necessary items. Broom 116 Duster 117 Floor Wiper 118 Bucket Set 119 Mug 120 Dust Pain 121 Mop 122 Dis-infectant Cleaner 123 Polyster Cleaning Cloth 124 Detergent Soap 125 P/F home insulation 8mm-10mm thick of starndard made to G.I water circulation/Distrubution network incl. rapping, insulation with PVC adhesive tap of required dia complete. 126 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) 127 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as perarchitectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other sid 128 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawingsand the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) 129 Providing and Fixing of 12mm thick imported wood panelling of approved brand and manufacture including cost of frame work of Budloo wood and touch wood all complete 130 Providing and fixing of Kail wood cornice 2" x 2" including fixing with necessary nails all complete 131 Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters leadWith cement mortar 1:4 (1 cement : 4 fine sand) complete. 132 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work 133 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick all complete. 134 Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works 135 Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish all complete (on stone work). 136 Painting with terra cota paint on tile work, including cleaning of surface and priming coat, two or more coats of approved brand and manufacture. 137 Providing and Fixing of Decorated type Garden Bench of approved band manufacture including all necessary fittings/ fixtures complete design and pattern to be approved bu Engineer Incharge (Payments to be made as per actual). 138 Providing and fixing of Patio Umbrella of superior quality with Four chairs and one table of approved brand and manufacture incl. all necessary fittings/fixtures complete.(Design and pattern to be approved bu Engineer Incharge) (payments to be made as per actual). 139 Refixing of washroom door with fibre glass sheet and necessary wood work (imported wood) and other necessary fittings/fixtures incl. necessary repairs etc all complete. 140 Providing and fixing of 3D Vinly Wallpaper of approved brand incl. making good surface and including all adhesive, fixtures, fittings/ glueetc all complete. (design and brand to be approved by EIC) 141 Providing & fixing of 12 mm thick Laminated Wood flooring of approved brand and make over 4 mm foam under layer including all fittings and fixtures, carriages complete as per directions of Incharge Engineer 142 Dismantling of Old khatamband ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 meters lead 143 Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood including the cost of frame work ,12mm ply board incl. sprit polishing etc pattern and design approved by EIC complete job. 144 Demolishing Tile work/ Marble work manually including disposal of rubish Upto a lead of 50 m 145 Engagements of JCBfor execution of works of various natures Complete Job including per day progress. 146 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil 147 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 30 cm girth upto and including 60 cm girth. 148 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 60 cm girth upto and including 120 cm girth. 149 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 120 cm girth upto and including 240 cm girth. 150 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Above 240 cm girth 151 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed,( All kinds of Soil) 152 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer in-Charge. All kinds of soil : 153 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:1 meter from cutting edge All kinds of soil : 154 Providing / laying of RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipes upto site ofwork complete.9'' 155 12" dia 156 18" dia 157 24" dia 158 36" dia 159 48" dia 160 Providing / laying of MS Pipes (B-type) of approved brand and makein proper position/ grade including cutting of road surface upto required depth & making of road surface motorable, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete 6'' dia. 161 8" dia 162 10" dia 163 12" dia 164 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 165 Supply and filling of RBM /Stone soling of specified size including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacityincluding carriage of the same from approved source upto site of work complete 166 Supply and filling of Khak bajri including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacityincluding carriage of the same from approved source upto site of work complete( for Berm). 167 Supply, stacking and laying of Naturally occurring gravel close graded maximum aggregate size range 75mm granular sub base course nallahincluding sorting, spreading to template, watering and consolidation to required gradient and camber with 80and consolidation to required gradient and camber with 80100KN Power Road Roller all inclusive leads, lifts, loading, unloading carriage of materials from approved source to site of work complete. Finished work to be measured. 168 Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means) 169 Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. 170 Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 90 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(Finished work to be measured) 100mm compacted thickness 171 Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 63 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(Finished work to be measured) 75mm compacted thickness 172 Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 53 to 22.4mm size, stone screening 11.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(Finished work to be measured) 75mm compacted thickness 173 Providing, laying, spreading and compacting graded stone aggregate (size range 53mm to 0.075 mm) to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, transporting the mix material by mechanical transport from the plant upto the site of work, laying the mixed material in uniform layers with mechanical paver finisher on well prepared surface and compacting the same with vibratory roller of 8 to 10 tonne capacity to achieve the desired density / compaction as per specifications and directions of Engineer Incharge, including cost and carriage of all materials, hire charges of machinery, all taxes etc complete 174 Providing and applying of tack coat using hot straight run bitumen of grade VG 10 @ 0.5Kg / Sqm ( on BT surface surface) including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler cleaning and preparing the xisting road surface as per specification including cost and carraige of all materials upto site of work complete 175 Providing and applying of tack coat using hot straight run bitumen of grade VG 10 @ 0.75 Kg / Sqm ( on WBM / WMM surface) including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler cleaning and preparing the xisting road surface as per specification including cost and carraige of all materials upto site of work complete 176 Providing and laying 50mm thick Bituminous macadam base course with stone aggregate of quarry, size and grading as course with stone aggregate of quarry, size and grading as specified in CPWD specifications and bitumen of grade VG 10 @ 3.3% by weight of total mix including hot mixing of stone aggregate and bitumen in Hot mix plant, transporting the mixed material from plant upto site of work and laying the mixed material with paver finisher to the required level and grade, rolling with road roller of 8 to 10 tonne capacity to achieve the required compaction and density including cost and carriage of all the materials, hire charges of machinery, all taxes etc complete 177 Providing and Laying of 25mm thick (compacted) semi dense bituminous concrete surface using crushed stone aggregate of specified grading as per specification and bitumen of grade VG 10 @ 5% by weight of total mix including hot mixing of the stone aggregate and bitumen in hot mix plant, transporting the mixed material from plant site by mechanical transport upto the site of work, laying the mixed material with paver finisher to required level and grade and rolling with road roller as per MORTH specification to achieve the desired compaction / density including cost and carriage of the all materials, hire charges of machinery, all taxes etc complete 178 Providing and laying 6mm thick seal coat of premixed fine aggregate (passing 2.36mm and retained on 180 micron sieve) with bitumen using 128 kgs of bitumen of Grade VG 10 bitumen per Cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface (i.e, 0.768 kg of bitumen per Sqm of road surface) including hot mixing of fine aggregate and bitumen in hot mix plant, transporting the mixed material from plant site by Mechanical transport upto site of work, laying the mixed material with paver finisher to required level and grade, rolling with road roller to achieve desired compaction including cost and carriage of all the materials, hire charges of machinery, all taxes etc complete 179 Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete 180 P/L in position cement concrete in1 : 4 : 8(1 cement : 4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 181 P/L in position cement concrete in1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 182 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. cvarriage 183 P/L in position cement concrete in1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 184 P/L in position reinforced cement concrete in 1 : 2 : 4 (1 cement:2 course sand: 4 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of allmaterials upto site of work complete.( all works upto plinth level) 185 P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete.( all works upto plinth level) 186 P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete.( all works upto floor V level ) 187 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) includingall carriages from approved source to site of work complete. 188 Extra for brick work with common burnt claybricks in superstructure above plinth level upto floor five level 189 Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. FE 500 D or more complete. 190 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 191 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Riveted and bolted 192 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded 193 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 194 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. 195 Providing and fixing bolts including nuts and washers complete. 196 Providing and fixing M.S. rivets of sizes in position. 197 Welding, including transportation of plant at site etc. complete By gas plant 198 Welding, including transportation of plant at site etc. complete By electric plant 199 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. 200 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 201 Providing and fixing hand rail of approved size by welding etc. 136.00Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube 202 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.G.I. pipes 203 Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 204 Centering and shuttering including strutting, propping etc. and removal of form work for: Return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc 205 Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofings, landings, balcones and access plateform 206 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 207 40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 208 25mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 209 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete 210 12mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. 211 12mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. 212 15mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. 213 15mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. 214 Engagement of labour /Mazdour for one day 215 Engagement of skilled labour with all machinary like cutters , axe etc for purning of the trees. (Plumber/ Carpenter/ Mason/ Electrician/ Welder etc. 216 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. (Progress details to be provided at time of Payments. 217 Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive 218 Clearance of slipsdisposal lead upto 50 m and lift upto 1.5 m. (Payments shall be made as per dialy basis progress/ Geo tag proof enclosed at time of payments).In ordinary soils disposal lead upto 50 m and lift upto 1.5 m 219 In soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m. 220 In soils; mixed with Decomposed Rocks; by blasting or any other means 221 Providing and applying 2.5mm thick road marking strips (retro reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreignmaterial etc. complete as per direction of Engineer-in charge and accordance with applicable specifications. 222 White washing with lime to give an even shade on New Work (three or more coats) 223 White washing with lime to give an even shade :Old work (two or more coats) 224 White washing with lime to give an even shade :Old work (one or more coats) 225 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats on new work 226 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 227 Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm 228 Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.New work (Two or more coats) 229 Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.Old work ( One or more coats) 230 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in charge). 231 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. 232 Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge. 233 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm),including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). 234 Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long incl. fixing in cement concrete 1:2:4 mix 450mmx450mmx450mm incl. earth work allcomplete 235 Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with 16.0 (Road Work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer in-charge.Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm. 236 Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm. 237 Providing and fixing post delineators made of ABS round body fitted with 2nos. 100mm dia high reflective and reflectors and mounted on M.S. pipe of 65mm dia duly powder coated with anti rust and anti-theft steel to be installed as per direction of Engineer-in-charge. 238 Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact Polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The Glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35 +/- 5 degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 asrecommended in BS : 873 part 4 : 1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in charge. 239 Providing and fixing precast reinforced cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) kilometer stone as per standard design including finishing smooth in 1:3 cement mortar ( 1cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately. 35x111x25 cm size. 240 Providing and Placing in position at site, factory made pre cast reinforced cement concrete divider blocks, 8' 0" length (as per drawings) with smooth finish in 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregates, 10 mm to 12.50 mm nominal size) concrete grade using reinforcement TMT bars @ 59 Kg/per unit (to be provided as per the instructions of site Engineer) with strong vibrartory compaction and of approved size, design and shape, applying priming coat and road marking paint of two coats, all inclusive (material and labour) with all leads and lifts, loading, unloading and carriage upto site of work by way of required men and machinery complete. 241 Providing and Fixing of painted polycarbonate Parking safety convex mirrors, 1200 mm dia of approved brand and manufacture including cost of fittings and all other fixtures, complete job all complete. 242 Providing and fixing high intensity PVC Retro reflective tapes of 5 mm thickness on poles (two or more shades of yellow, black, white and red) all complete. 243 Providing and fixing of retro- reflectorisedInformatory/Guide signs sign board as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing incl. painting all complete. 244 Supplying and fixing of red fluorescent with white reflective sleeve traffic cone made of low density polyethylene (LDPE) material with a square base of 390 x 390 x 35 mm and a height of 770 mm, 4 kg in weight, placed at 1.5 m interval, all as per BS 873 all complete 245 Providing & fixing ofrumble strips (Speed Bumps) covered with premix bituminous carpet, 15-20 mm high at center, 250 mm wide placed at 1 m center to center at approved locations to control speed, marked with white strips of road marking paint (Size of strip 500 x 125 x 25 mm) 246 Providing and laying of 25-40 mm thick premix Road Repair Compound (Readymade) thatis a mixture of unheated mineral aggregate and emulsified bitumen. The aggregates Passing through the sieve size 10 mm = 95-100 % , 4.75 mm = 60-70 %, 2.36 mm = 12-15 % , 0.075 mm = 2-3% . TheVolatile matter content 0.95% , Bitumen Content 6 % , the compound shall attain 35 % strength within 30 minsand 70 % strength within 24 hours. The compound shall have a minimum bonding strength of 2.5 kg/sqcm , including cleaning andpreparing the existing road surface tore Remove all dirt, dust, mud etc and finally booming the surface as perrequired specification on (including cost & carriage of all materials ) including rolling with PRR of 8-10 tonne capacity incl. Including a coat of tack coat or a coat of Bituminous emulsion all complete. 247 Providing and laying of 25-40 mm thick premix Road Repair Compound (Readymade) thatis a mixture of unheated mineral aggregate and emulsified bitumen. The aggregates Passing through the sieve size 10 mm = 95-100 % , 4.75 mm = 60-70 %, 2.36 mm = 12-15 % , 0.075 mm = 2-3% . TheVolatile matter content 0.95% , Bitumen Content 6 % , the compound shall attain 35 % strength within 30 minsand 70 % strength within 24 hours. The compound shall have a minimum bonding strength of 2.5 kg/sqcm , including cleaning andpreparing the existing road surface tore Remove all dirt, dust, mud etc and finally booming the surface as perrequired specification on (including cost & carriage of all materials ) including rolling with PRR of 8-10 tonne capacity. Including a coat of tack coat or a coat of Bituminous emulsion incl. Supply, stacking and laying of WBM grade 2nd75mm compacted thickness with specified graded stone aggregate 63mm - 45mm size broken quarry stone @0.92cum/10 sqm and using of screening 11.20mm size @ 0.135cum/10sqm and binding material @0.06cum/10sqm of road surface including sorting, spreading to template, watering and consolidation to required gradient and camber with (80-100) KN road roller all inclusive leads, lifts, loading, unloading, head load if any and carriage of materials fromapproved source to site of work complete (To be laid as per guide line of MOST specification). Finished work to be measured and paid. 248 Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in :R.S. Joists 249 Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in :Channels, angles, tees and flats 250 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead 251 Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge: 252 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. 253 Engagement of Labourers for removal of unhygienic materials, mulba, building rubbish from designated site and its disposal beyond site premises with all leads, lifts and carriage complete. 254 Hire and installation charges of Shamyana’s of standard quality/shape/colour/hygiene (as per the directions of Engineer Incharge) for VIP's,Guests, Officers,School Children etc. with all leads, lifts, handling , rehandling and carriage upto site and lifting back after conclusion of ceremony. 255 Hire charges for supply of furnishing/ furniture items of standardquality/shape/colour/hygiene (as per the directions of Engineer Incharge) of required size with all leads, lifts and carriage including fixing of the same in arranged manner as will be directed at site all complete.P.V.C Chairs (heavy duty). 256 Druggets. (12’x12’) 257 Carpets. (12’x12’) 258 Red Runners of 4' wide. 259 Hire and installation charges of Stage Top/canopy ofsize 16’x18’ with all leads, lifts, handling, rehandling and carriages complete. (as per the directions of Engineer Incharge) including crewel ceiling and fixtures with necessary decoration water proof as per instructions at site all complete. 260 Excavating holes in all classifications of soil of required size and depth for erecting of barricading post with ramming, watering 198.00depth for erecting of barricading post with ramming, watering and disposal of surplus excavated soil beyond site premises or as will be directed at site complete including labour chaarges for fixing of barracading rods in three rows with all leads, lifts , handling, rehandling and removing of the same after conclusion of the ceremony. 261 Carriage of barricading from divisional store to site of venue and from site to divisional store after conclusion of ceremony including engaging 3 number labours. 262 White washing with lime to give an even shade Three or more coats over concrete surface all complete 263 Engagement of one number truck for two days with 5-No. labourers for collecting of furniture, VIP chairs, Sofa’s and necessary stage material etc. from different offices and divisional store etc. including loading, unloading and back to respective offices incl. carriage of Barricading etc complete. 264 Supplying, spreading of Crushedagg./stone dust in layers including all leads, lifts and carriage upto site of work complete if required during wet weather.. 265 Hire and installation charges ofPindals having size50'-0"x140'0" for three days fixed with G.I tube with water proofing top and sides white house ornamental ceiling with crewel lining of required size for VIP’s, civil and police officers of district administration distinguished guests, panches and surpanches and other designates to grace the occasion (it should be of good quality, Shape, colour, hygiene as per the Directions of Engineer Incharge). 266 Preparation and making arrangements of Zaffron Kehwa with Shrimal ready to serve with all crockery items like cups, spoons and plates etc of Superior quality free from cracks etc incl. supplying of medium size Shirmal of good quality to be obtained from standard baker complete.complete. 267 Supply and serving of Fresh Mixed Dry Fruit 268 Supply and fixing of Banners of required sizes with required letter writing as well be directed (size 3'x6') complete 269 Supply of Mineral water bottle 500 ml capacity each. 270 Supply and installation of artificial bunting inincluding flowers ballons etc as directedby Engineer Incharge 271 Hire and installation chargesof view cutter canath 7'.00" including its fixing for covering of the area around venue and removal of same after conclusion of the function 272 Hire Charges for stendard Gas Heater for VIP's including gas cylinders all complete

Contact Information