Bids Are Invited For Selection Of Proposals To Record Prices For Future And Possible Hiring Of A Specialized ... in Brazil

Work Detail

Modular Flooring For Internal Area, Indoor Type, With Supply And Installation:- Pp Material - High Impact And High Resistance Polypropylene Copolymer;- Dimensions: 250 To 300Mm Cushioning: Minimum Of 42 Polyethylene, Tpu Or Thermoplastic Rubber Pins Per Piece; Finish Included;- High Mechanical Resistance;- High Impact Absorption;- Low Heat Absorption;- Low Dimensional Amplitude;- Antistatic Additive, Does Not Cause Discharge Due To Accumulation Of Static Energy;- High Coefficient Of Friction (Inclusive Wet Anti-Slip);- Quick Assembly (Maximum 2 Days);- Non-Toxic Flooring (Must Meet Nbr 16071-2:2020 With Nbr Nm 300-3/2004);- Present Reports Issued By A Laboratory Accredited By The Brazilian Calibration Network (Rbc/Inmetro) Or Equivalent That Prove The Quality Of The Modular Floor, With An Issue Date Prior To The Opening Of The Competition: - Approximate Tensile Strength Of 20 Mpa (Astm D638:2014); - Flexural Resistance Approximately 36Mpa (Astm D790:17); - Minimum Impact Resistance 16.5J (Astm D5420:21); - Shore Hardness D70 (+/-0.5) (Astm D2240:2014); - Dynamic Friction Coefficient Equal To Or Greater Than 0.45 (Astm D1894:14); - Minimum Load Capacity Of 15Kn;- Demarcation Lines Of Sports (Futsal, Basketball, Volleyball And Handball), With Demarcation Made With Flexible Bi-Component Pu-Based Paint;- The Colors Of The Court And The Demarcations Will Be Combined With The Winner After The Bidding Process., Modular Flooring For Outdoor Areas, Of The Outdoor Type, Does Not Cause Discharge Due To Accumulation Of Static Energy;- High Coefficient Of Friction (Including Wet Anti-Slip);- Drainage;- Non-Toxic Flooring (Must Comply With Nbr 16071-2:2020 With Nbr Nm 300-3/2004);- Present Reports Issued By A Laboratory Accredited By The Brazilian Calibration Network (Rbc/Inmetro) Or Equivalent Proving The Quality Of The Modular Flooring, With A Date Of Issue Prior To The Opening Of The Competition:- Tensile Strength (Average) 540.00 N (Astm D638:2014);- Flexure/Deformation Resistance (Average) 37.00 N (Astm D790:17);- Approximate Compressive Strength 1,735.00 Kgf (Astm D790:17);- Hardness Shore 69.1 (+/- 3.2 Astm D2240:2014);- Resistance To High Temperature (60ºc For 72H): No Change (Laboratory Test);- Static Friction Coefficient (With Sole) Approximate 0.60 (Astm 1894:14);- Dynamic Friction Coefficient (With Sole) Approximate 0.50 (Astm 1894:14);- Complies With Abnt Nbr 16071-3: 2021 - Playgrounds - Part 3: Safety Requirements For Impact Absorbent Floors, Absorbing Free Fall Of Up To 1.3 Meters. Pu;- Layout And Playful Demarcations Will Be Agreed With The Winner After The Bidding Process., 12/02/2026 - 13:48:21

Contact Information