|
Tender For Special Repair To Smqs Of Djp At Af Stn Vadodara - Taking down chowkats or frame exc 1.5 Sqm and n exc 4.0 Sqm each (without taking off shutter from the fram) all as speified and as directed. 2 Taking down chowkats or frame nexc 1.5 Sqm each (without taking off shutter from the frame all as speified and as directed. 3 Taking down shutter only of any description exc 1.0 Sqm n exc 2.0 Sqm and removing all as speified and as directed. 4 Taking down shutter only of any description n exc 1Sqmand removing all as speified and as directed. 5 M&L for35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc(without shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats and directed by Engg. In Charge. 6 M&L forFactory made flush shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in shutter all as specified and as directed. 7 S&Fsolid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete 8 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingspecification and drawing complete 9 M&L Factory made flush shutters 25mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter as in shutter all as specified and as directed.. 10 S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding complete.. 11 S&F200mm long aluminium anodized barrel tower bolts of extruded section and fixed. 12 S&F150mm long aluminium anodized barrel tower bolts of extruded section and fixed 13 S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm. 14 S&F150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. 15 S&F100mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. 16 S&FHasp and staple, safety type aluminium anodized including bolt to hinge plate and fixed with screws 100 mm size complete all as specified and directed. 17 S&F in repair door stopper of aluminum alloy body and tongue double legged anodized with hard draw steel spring over all length of cover plate 150mm fixed in floor all as specified (ISI Marked). 18 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,plaster work on edges during fixing (if required)etc all complete as per architectural drawings and the directions. 19 S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples. 20 S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified 21 M&L for Pressed steel frames(105 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete, as specified, 22 M&L forPressed steel frames(125 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified, 23 S&F Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework or water tanks and similar work conforming to Fe 290 Gde-E-165. 24 M&L forFramed work( Fe 290 gde E 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing complete all as specified and as directed 25 M&LforPreparation of new steel surfaces and applying with 2 coats synthetic enamelpaint of any description, over 10cm in width or girth, not otherwise described over a red oxide primer complete all as specified 26 M&L for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer. 27 M&L for Mild steel, plain, black sheet 1.00 mm thickin wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as require all as directed 28 S&F mild steel hold fast etc conforming to Fe-410-0 or 310-0. 29 M&L for cutting holes in brick wall for inserting hold fast etc. built in CM of depth exc. one brick but n. exc. two brick thick wall making good dismantled portion in cementmortar in (1:3) orPCC (1:2:4) type B1 as specified. 30 Demolition of Reinforced cement concrete staircases, landing, chajjas and similar suspended work all as specified and directed. 31 M&L for Separating, scraping and cleaning of reinforcement (Demolition of concretemeasured separately) all as specified and directed. 32 M&L for design Mix RCC M-30 ( 20mm graded aggregate) in stairways(except spiral staircases)including steps (square or spandril), string pieces, carriages, etc., complete, anysection straight or winding, but excluding landings all as specified and directed. 33 M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips 34 M&L for formwork of rough finished flat concrete surface for staircases with sloping or stepped soffits including risers and stringers (excluding landing) all as specified and directed. 35 Demolition of Cement Concrete any description and in any position not otherwise specifically provided for all as specified and directed. 36 M&L for Cement concrete 75mm thick as in plinth protection type C-2,1:3:6 (40mm graded aggregate)even and soomth finished surface without using extra cement. 37 M&L for 75 mm thick Cement concrete Type D21:4:8 (40 mm graded gradedaggregate) as in sub bases,floor finishes and pavings. 38 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. 39 M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular)area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. 40 M&LNon - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular)area of each tile exceeding 0.18 SQM but not exceeding 0.38 SQM, as in skiting,/ vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. 41 M&LNon - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular)area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. 42 M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. 43 M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and directed. 44 M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls all as specified and directed. 45 Demolition of stone slabs and tiles of any description or any thickness, laid bedded and pointed in any mortar. 46 M&Lfor Machine cut Pre polishedkota stone slab flooring 20-25 mm thick over and incl 15mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece as in window cill, stairscase and Kitchen platform etc. 47 Taking up or down steel tubing and connections for 15mm bore, including cleaning for refixing or removal to store 48 Taking up or down steel tubing and connections for 20 mm bore, including cleaning for refixing or removal to store 49 S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, 50 Fixing only 15mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified 51 S&F 20mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, 52 Fixing only 20mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified 53 Dismantling water tanks exc 200 ltr & n exc 500ltr capacity and removing to store 54 S&F 500ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified. 55 S&F 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed. 56 S&Fin repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm dia pipe 57 S&F in repair vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed. 58 S&F in repaivitreous china pedestal pattern white (excluding fixing both flushing cistern and flush pipe) complete all specified . 59 Supply & fixing in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinged device fixed in repairs. 60 S&F in repair 10 litres capacity PVC valveless symphonic action type, flushing cistern, flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern, white, with inlet, ball valve float handle including brackets all as specified. 61 S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube andABS wall hook including making connections and fixed in position complete in all respect as specified . 62 S&F 32mm brass chromium plated waste coupling for wash hand basin all as specified 63 S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down high pressure, with or without lettered "Hot" or "Cold" withlong screwedshanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe all as specified. 64 S&F in repair Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe. 65 S&F in repair Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed bothends for iron pipe or for unions and fixed to15mm bore pipe complete all as specified. 66 S&F in repairConcealed type Stop valves, fancy type,chromium plated with long shank and cup cast copper alloy,screwed down, high pressure,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified. 67 S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union to15mm bore pipe complete all as specified. 68 S&Fin repair 32/40mm PVC waste pipe for wash hand basin & kitchen sink, 600mm long complete all as specified 69 S&F PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified. 70 S&F Tubular Towel Rail 20 mm dia 600mm long between flanges Brass Chromium Plated fixed complete all as specified 71 S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified . 72 S&F Soap dish, any type, fixed to plugs with chromium plated brass screws. 73 M&L for Treatment to sunken portion including demolition of existing tiles and PCC of sunken floorand provn of 40mm thickPCC 1:2:4 type B1astop layer and10mm thick plaster in CM 1:4 with WPC Liquid complast 421 in bottom and sides of sunken potion and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering with 10mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC as in second layer including jointing of CI pipe joint , provn of GI spout with 40mm dia pipe up to 30cm with water tight joint from the external surface of wall andfilled with PCC1:5:10 type E2 as lean concrete up to the required level as directed by Engr in Charge 74 Demolition and breaking up drain pipes (CIdrain pipes /PVC/ AC or Reinforced concrete) set in cement mortar (100mm dia), if required complete all as specified and directed. 75 S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor all as specified and directed. 76 S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor all as specified and directed. 77 S&F in repair 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed. 78 S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. 79 S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed. 80 S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequalall as specified and directed. 81 S&F 110mm bore PVC (SWR) couplers 82 S&F 75mm bore PVC (SWR) couplers 83 S&F 75 mm bore PVC (SWR) bends any radius 84 S&F 110 mm bore PVC (SWR) bends any radius 85 S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and waste coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm 86 S&F in repair Stainless Steel plate rack 1mm thick of Size 31"x36"x10" fixed in position complete all as specified 87 S&F25 mm dia curtain Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc. fixed complete as in repairs all as specified and directed 88 Taking dawn cementplaster any description on brick or stone wall/ celling including raking out joint, haking for key scrubing with water etc. 89 M & Lfor 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonry wall, finishedeven and smooth with thin layer of sagol. 90 M & L for 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 using water proofing compound on faces of brick masonry wall, finished even and fair etc complete. 91 M&L for Rendering 5mm thick on concrete surface of ceiling CM 1:3 finishing the surface fair and even complete all as specified and directed. 92 M&L for Preparation of new plastered surface of wall and applyingtwo coats of exterior acrylic emulsion paint over a coat primer complete all as specified and directed. 93 M&L for Preparation of new surfaces of wallrubbing down andapplying two coats of oil bound distemper over application of chalk whiteningcompleteall as specified as directed 94 M&L for preparation of new plastered wall surface and applying three coats of white wash on ceiling surface complete all as specified and directed 95 M&L forComplete removal of existing treatment and applytwo coats of exterior acrylic emulsion over a coat of primer incl preparation of surface complete all as specified 96 M&L for Complete removal of existing treatmentandapplying two coats of oil bound distemper over application of thin layer of putty with surface preparation complete all as specified as directed 97 M&Lfor Complete removal of existing treatmentandapplying three coats of white wash on ceiling complete all as specifiedas directed by Engineer -in-Charge. 98 M&L for Preparation of old surfaces and apply 3mm thick putty on wall/ceiling finished complete allas specified 99 M&L for Filling surface cracks not exc 5 mm to 7 mm wide with "Dr Fixit" cracks X power or equivalent polymer modified cracks filler all as per manufacturer"sinstructions and as directed by Eng-in-Charge. 100 Removing of existing unserviceable water proofing treatmenttaking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises. 101 M&L for Applying cold bituminous primer @ 0.30 Ltr / Sqm conforming to IS 3384 laying APP polymer modified membrane 3mm thick 3 Kg/Sqm in weight with non-woven polyester reinforcement with plain finish and sealing all overlaps of 75mm in length side and 75mm on width side of membrane by torching the same as per manufacture instruction and all as per particular specification including application of solar reflective aluminium paint all as specified and directed by Engr-in Charge Note:-(a) Rate quoted deemed to be inclusive of cleaning of surface to be treated properly to receive the primer and all as directed by the Engr-in-Charge.(b)Necessary guarantee certificate shall be given by the manufacturer for the material for 10 years from the date of completion of work.(c) APP membrane treatment shall be done firstly at corners and junction of parapet wall 30cm on vertical position and 30cm on horizontal position shall be done with proper attention and work carried out by authorised applicator only. Main portion of roof treatment shall be commenced only on completion of corners/edges/junctions.(d) APP membrane shall be taken upto outside of the parapet wall to an extent of 150mm minimum.(e) Ensure while laying the treatment no bulging on surface/voids shall be found and proper care/attention be given for the treatment.(f) If any work executed at site without any authorised applicator, the same shall be rejected and no payment shall be consider.(g) Contractor shall produce the certificate from the manufacturerer for the authorised applicator before commencement of work. 102 M&L for 10mm thick plastringin CM 1:4 mixed with WPT 3% by weight of cementfinished even and smooth with out using extra cement onroof surfacesfor laying WPT complete all as specified and as directed by Engr-in-Charge. 103 M&L for PCC 1:2:4 Type B-0 using 12.5mm graded aggregate laid to slope 1:30 in padding for WPT over roof slab, filling of pressed steel door frame complete all as specified and directed by Engineer-in-Charge. 104 M&L PCC 1:2:4 Type B-0 using 12.5mm graded aggregate as in cover fillet of 75 mm radius at junction of roof slab and parapet wall etc complete all as specified and directed by Engineer-in-Charge. 105 Supply only integral water proofing compound. 106 Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified 107 M&L for Brick work with sub class "B" bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified 108 Removing building materials etc. (other than spoil payable under items 03028 to03031 in Section-3—Earthwork) to a distance of 1.0 KM, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. 109 Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed. 110 Taking down sub main wiring copmlate including removing materials from site and making good disturbed surfaces complate all as specified and as directed. 111 M&L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed (FRLSH) multistranded copper conductor cable 1100 volt grade enclosed in and including drawn through existing PVC conduit concealed wiringwith accessoriesby means of PVC sleeves Dash fastners and cadmium plated screws all as per ISI including sunk type boxes for mounting fitting like switches, socketes fan regulators with 3 mm thick phenolic Laminated sheet top covers concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly.Make of wire/cable: Havells, Finolex, Anchor 112 (a)One light point controlled by one one/way switch. 113 (b)One Fan/Exhuastfan point controlled by one,one way switch. 114 (c) One 3 pin 5 Amps socket outlet on same board with other switch. 115 (d) One 3 pin 5 Amps socket outlet on independent board with other switch. 116 (e ) One bell point controlled by one, oneway switch 117 (e ) One light point controlled by twoway switch 118 All as per item No.111 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable (FRLSH) as earth continuity conductor for one 5 pin 15 Amps power socket outlet point on independent board complate all as specified and as directed. 119 M & L forpoint wiring in concealed conduitcomplete with multistranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade (FRLSH), conforming IS 694 & color code drawing in concealed conduit complete, with repalcement ofsunken in pressed steel terminal boxes of available size with providing modular top cover platewith all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit inclding arrangements for modular /regular fittings acessories complete all as specified. 120 (a) One light point controlled by one, one way switch. 121 (b) One Fan point controlled by one,one way switch and regulator. 122 (c ) One 3 pin 5 Amps socket outlet on same board with other switch. 123 (d) One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size. 124 (e ) One bell point controlled by one way switch 125 (f ) One light point controlled by two 2 way switch 126 All as per item No.111 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable (FRLSH) as earth continuity conductor for one 5 pin 15 Amps power socket outlet point on independent board complete all as specified and as directed. 127 M&L for sub main wiring using two run single core 6 Sqmm fire retardent PVC insulated and unsheathed cable with copper conductor 1100 vots grade, FRLSH & ISI mrked complete with PVC conduit accessories like bends tees etc and PVC insulatd copper cable 6 Sqmm for earth wire and connecting to earth dolly, complete all as specified and as directed. 128 M&L for sub main wiring using two run single core 4 Sqmm fire retardent PVC insulated (FRLSH) and unsheathed cable with copper conductor 1100 vots grade, ISI mrked complete with PVC conduit accessories like bends tees etc and PVC insulatd copper cable 4 Sqmm for earth wire and connecting to earth dolly, complete all as specified and as directed. Notefor item No 115 & 116 : Two run of main wire, one run of earth wire & one run of PVC conduit shall be measured as one unit. 129 S&F switch piano modular flush type single pole one way 5 Amp 240 Volts complete all as specified and as directed. 130 S&F switch piano modular flush type single pole one way 15 Amp 240 Volts complete all as specified and as directed. 131 S&F bell push 6 Amp modular single pole one way 240 Volts complete all as specified and as directed. 132 S&F switch piano modular type two way5 Amp 240 Volts complete all as specified and as directed. 133 S&Fsocket6 /16 Amp modular 2/3 pin combined 2 module flush type complate all as specified and as directed. 134 S&Fsocket6 /16 Amp modular 2/3 pin combined 2 module flush type complete all as specified and as directed. 135 S&F ceiling rose modular surface PVC/bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked. 136 S&F modular electronic fan regulator heavy duty type A/C 240 V complete all as specified and as directed. 137 S&F in DB"sSheet metal enclosure for SPN DB 12 waytype 240 volts and 200 Amp ratings bus bar complete allas specified and directed. 138 S&F MCB in the DBs as under : 139 (a). MCB SP Isolater up to 40 Amp, 240 volts. 140 (b). MCB SPN Isolater upto 63 Amp, 240 volts. 141 Supply and fixingLEDTubelight fittingENERGY Efficient 20 Watt 2000 lumen bright lighthours complete all as directed by Engr-in-charge. 142 Supply and fixingLEDTubelight fittingENERGY Efficient 10 Watt 2000 lumen bright lightcomplete all as directed by Engr-in-charge. 143 Supply and fixingLEDwall mounted fittingENERGY Efficient 9 Wattambient lighting made from engineering grade polymer with prismatic diffuser, aesthetic disign suitable for LED bulb. 144 Supply and fixing LED security light luminaire 35 Watt freedom , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete. 145 Supply and fix in replacment bracket for security light made up of 25 mm dia, 1.0 mtr long GI pipe, light grade, bent to required length, fixed to wall either clamps made of 20x3 mm mild steel flat minimum 15 cm long, 4 nos 8 mm dia bolts with nut complete including taking down old unserviceable all as speified and directed by Engr in Charge. 146 S&F bell ding dongtype A/C 240 V complete all as specified and as directed. 147 Supply & fix single pole and neutral encloser with a two pin and earth plug and socket complete with20 amp SPMCB complete all as specified and as directed. 148 Taking down serviceable exhaust fan from site cleaning the body and blade, painting and servicing complete and refixing the same location complete all as specified and as directed. 149 Taking down serviceable ceiling fan from site cleaning the body and blade, painting and servicing complete and refixing the same location complete all as specified and as directed. 150 Taking down unserviceable geyser with complete fittings and PVC connection including all fittings and fixtures from site and depositing at MES store as directed. 151 M&L for providing earthing complete with GI earth plate electrode 60 x 60cm x 3.15mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to copper earth lead 4 MM GI wire upto 7.5 meter long by means of bolts,nuts check nuts and washers of all galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-1 and connected to test point including necessary excavation/ earth work in any type of soil/rock strata, PCC 1:3:6 type C1, cement concrete 1:2:4 type B1 reinforced with welded steel wire fabric (AMP) not less than 4 KG per Sqm, funnel with wire mesh and watering pipe 15 mm dia bore (GI light grade), PCC pit with 50mm thick PCC cover etc. including testing on completing including GI protection pipe 15 mm dia medium grade for earthing lead complete all as specified and directed including .
|
