Bids Are Invited For Hiring A Company To Supply Two (2), One (1) Autoclave With Capacity Of 100L And One (1) ... in Brazil

Work Detail

Horizontal Hospital Autoclave With 100 Liter Capacity - Horizontal Equipment, With Microprocessor Control System, Internal Chamber Capacity Of 100L. It Must Operate Using Saturated Steam And Have A Structure Made Of Anti-Corrosive Material And An External Coating Made Of Stainless Steel Sheet. Programmable Microprocessor Control With At Least 9 Programs, With Panel And Control With On/Off Button And Lcd Display And Must Have At Least A Numeric Keypad For Control With A Protective Membrane For Viewing The Programmed Cycles, Pressure Gauge And Vacuum Gauge. External And Internal Chambers Made Of Aisi 316-L Stainless Steel With Thermal Insulation, The Internal Chamber Must Have A Drain And A Validation Input, Allowing The Introduction Of Sensors To Collect Process Temperature Data. It Must Have Two Doors, A Sanitary Barrier And An Emergency System. Door Closing Performed By Vertical Lift/Guillotine With Anti-Prush Safety System. Hydraulic System – Pipes And Connections Of The Hydraulic Assembly Must Be Made Of Anti-Corrosive And Resistant Material; Sterilization Chamber And Steam Generator Connections Must Be Made Of Stainless Steel Or Other Compatible Material; Have A Vacuum Pump And Centrifugal Water Pump With Sufficient Capacity For The Steam Generator. Security System That Must Make It Impossible To Operate The Equipment Due To Any Type Of Failure, Operator Carelessness Or Lack Of Supplies In Addition To Audiovisual Alarms. Noise May Not Exceed That Established By The Ministerial Labor Ordinance. The Equipment Must Be Accompanied By At Least: 02 External Carts To Accommodate The Materials, 01 Internal Cart To Accommodate The Materials, 01 Osmosis Water Purifier System (Compatible With The Capacity Of The Autoclave), 01 Printer. Have Local Technical Assistance., Fixed Digital X-Ray Device • X-Ray Generator: Fixed Microprocessed Radiodiagnostic Equipment From 10 To 800 Ma Or Greater With Error Indication And Level Of Kv, Ma And Mas, Anatomical Organ Program With At Least 200 Pre-Programmed Techniques. The Equipment Must Have Automatic Exposure Control (Aec) And Patient Dose Indication (Dap), In Accordance With The Iec Standard. High Voltage Control And Generator: High Frequency Microprocessed X-Ray Generator; Power Of 64 Kw Or Greater; Selection From 40 To 150 Kv; Mas Range 0.1 To 800 Or Greater; Ma Range 10 To 800 Or Greater; Exposure Time Of 5 Ms Or Less Up To 5 Seconds, According To Rdc 611; Generator Must Be Installed Under The Table; It Has A Multicolored Lcd Display For Selection And Indication Of Radiological Parameters. X-Ray Tube Thermal Protection. Cables: High Voltage Cable Pair. Specific Power Chart Must Be Provided For The Equipment Bid. The Operating Characteristics Of The Rx Generator Must Be Available On The Operating Command, Allowing Selection Of Exposure Parameters In The Manner Mentioned Above. • Bucky Mural: Vertical Displacement Of 130 Cm Or Greater; With Fixed Anti-Diffusion Grid Of At Least 40 Lp/Cm; Bucky With Fixed Grid; Electromagnetic Or Mechanical Brakes; With Location/Centering Cross Printed On The Top Of The Bucky; Variable Focus From 100 To 180 Cm. • Table With Floating Top: Transverse And Longitudinal Movement; Bucky With Fixed Grid; Load Capacity Of At Least 220 Kg; With Fixed Anti-Diffusion Grid Of At Least 40 Lp/Cm; Electromagnetic Brakes For Vehicle Movements

Contact Information