Bids Are Invited For Hiring Of A Specialized Company To Supply School Furniture, Administrative Furniture, N ... in Brazil

Work Detail

Fixed Chair (C7) Fixed Chair (C7) Dimensions And Tolerances Seat Width: 500 Mm /- 50 Mm; Seat Depth: 460 Mm /- 10 Mm; Seat Height: 430 Mm /- 10 Mm; Backrest Width: 400 Mm /- 10 Mm (Measured At The Most Prominent Point Of The Lumbar Support); Backrest Vertical Extension: 350 Mm /- 10 Mm; Seat Foam Thickness: Minimum 40 Mm; Backrest Foam Thickness: Minimum 30 Mm. Dimensional Tolerances For Tubes According To Abnt Nbr 6591. Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Features Seat And Back Made Of Hot-Molded Anatomical Plywood, Containing At Least Seven Internal Sheets, With A Maximum Thickness Of 1.5 Mm Each. Upholstery Of The Seat And Back In Expanded Polyurethane Foam, Glued To The Wood And Covered With Fabric, In Gray Color, Provided With Protection With A Water-Repellent Waterproofing Product. Lower Sides Of The Seat And Back Of The Back Covered With Injected Plastic Covers, In Black. Attaching The Seat And Back To The Structure Using Screws With Metric Threads And Locking Nuts. Structure Consisting Of 4 Feet, Made Of Steel Tube With Seam, Cold Rolled, Minimum Circular Section 22.3 Mm (7/8), With Minimum Thickness Of 1.5 Mm (Plate 16). Finishing Of The Metal Parts In Powder Paint, Glossy, In Black. Tube Terminations In Injected Plastic, In Black, Fixed Using A Fitting. These Must Not Be Able To Be Removed Without Using..., Fixed Chair (C8) Fixed Chair (C8) Dimensions And Tolerances Seat Width: 480 Mm /- 30 Mm; Seat Depth: 430 Mm /- 30 Mm; Seat Height: 440 Mm /- 10 Mm; Backrest Width: 430 Mm /- 30 Mm; Vertical Extension Of The Back: 250 Mm /- 30 Mm. Features Seat And Back In Virgin Polypropylene Copolymer, Free Of Mineral Fillers, Injected, In Blue; Structure In Cold Rolled Carbon Steel Tube, With Seam, Diameter Of 20.7Mm, In Plate 14 (1.9Mm). Attachment Of The Injected Seat And Back To The Structure Using Recessed Rivets, Diameter 4.8 Mm, Length 12 Mm. Shoes In Virgin Polypropylene Copolymer, Injected In Blue Color, Fixed To The Structure Using A Fitting And Expansion Pin. Anti-Rust Treatment Must Be Applied To Metal Parts To Ensure Resistance To Corrosion In A Salt Spray Chamber For At Least 300 Hours. The Degree Of Rusting Should Be Ri0 And The Degree Of Blistering Should Be D0 /T0. Painting Of Metallic Elements In Epoxy/Polyester Hybrid Powder Paint, Electrostatic, Polymerized In An Oven, Minimum Thickness 40 Micrometers, Gray Color., Swivel Chair (C6) Swivel Chair (C6) Dimensions And Tolerances Seat Width: 500 Mm /- 50 Mm; Seat Depth: 460 Mm /- 10 Mm; Variable Seat Height: Mandatory Range Between 420 Mm And 520 Mm; Backrest Width: 400 Mm /- 10 Mm (Measured At The Most Prominent Point Of The Lumbar Support); Backrest Vertical Extension: 350 Mm /- 10 Mm; Seat Foam Thickness: Minimum 40 Mm; Backrest Foam Thickness: Minimum 30 Mm; Dimensional Tolerances For Tubes According To Abnt Nbr 6591; Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Features Seat And Back Made Of Hot-Molded Anatomical Plywood, 5Mm Each. Upholstery Of The Seat And Back In Expanded Polyurethane Foam, Provided With Protection With A Water-Repellent Waterproofing Product. Lower Sides Of The Seat And Back Of The Backrest

Contact Information