Quotation Are Invited For Seat;Child Swing;Playground Equipment in South Africa

Work Detail

Quotation are invited for Seat;Child Swing;Playground Equipment Delivery Date: 2026/05/11 Delivery To: Logistics - Hillstar Warehouse Complex MATERIALS STORE / PH: 799 5200 Delivery Address: 01 Bamboesvlei Road, Ottery Closing Date: 2026/02/18 Closing Time: 12:00 PM Description: 260 each x seat;child swing;playground equipment Specification: * SEAT - TYPE: Tyre Child Swing; SPECIFICATION: 330mm(13inch) diameter, cross ply, un-rethreaded motor car tyre cut to shape and size containing a drilled 20mm rainwater drain hole in the centre of the seat for drainage once seat is hung (REF DRAWINGS: TYRE SWING, PART A AND PART B). Tyre shall be turned inside out to form seat with no bumps and bulges. No steel capped tyres to be used. Tyre shall not be torn or have steel beading showing or protruding. All Sharp edges shall be cut away and rounded off; ATTACHMENTS: All attachments shall be galvanised iron, with any sharp edges ground smooth. Bolts and nuts shall be wide headed cup fitted type with flat washers. The hanger bracket shall be of 3mm galvanised plate (REF: PART A) and shall be drilled to allow fitting of an 8mm pin diameter screw pin chain shackle. Each swing shall be supplied with two such shackles attached to it. All nuts shall be locked by peening over the bolt end; GUIDELINE: Wherever reference is made to any particular Trademark , Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent".SEAT - TYPE: Tyre Child Swing; SPECIFICATION: 330mm(13inch) diameter, cross ply, un-rethreaded motor car tyre cut to shape and size containing a drilled 20mm rainwater drain hole in the centre of the seat for drainage once seat is hung (REF DRAWINGS: TYRE SWING, PART A AND PART B). Tyre shall be turned inside out to form seat with no bumps and bulges. No steel capped tyres to be used. Tyre shall not be torn or have steel beading showing or protruding. All Sharp edges shall be cut away and rounded off; ATTACHMENTS: All attachments shall be galvanised iron, with any sharp edges ground smooth. Bolts and nuts shall be wide headed cup fitted type with flat washers. The hanger bracket shall be of 3mm galvanised plate (REF: PART A) and shall be drilled to allow fitting of an 8mm pin diameter screw pin chain shackle. Each swing shall be supplied with two such shackles attached to it. All nuts shall be locked by peening over the bolt end; GUIDELINE: Wherever reference is made to any particular Trademark , Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/316958

Contact Information