|
Digital Split Air Conditioner 12000Hot/Cold Digital Split Air Conditioner, Parade, Cold, Minimum Cooling Capacity Of 12,000 Btu/H, 220 Volts, Digital Display, Dehumidification Function, Wireless Remote Control And Digital Display, Low Noise Level. Labeling Containing Procel A Seal, With Inmetro Classification. Minimum Manufacturer Warranty Of 01 (One) Year. Minimum Compressor Warranty: 10 Years. Minimum Appliance Warranty: 12 Months, Digital Split Air Conditioning 18000 Btus Hot/Cold Digital Split Air Conditioning, Minimum Cooling Capacity Of 18,000 Btu/H, With Inmeter Rating. Minimum Manufacturers Warranty Of 01 (One) Year., Digital Split Air Conditioning 24000 Btus Hot/Cold Digital Split Air Conditioning, Minimum Cooling Capacity Of 24,000 Btu/H, Digital Split Air Conditioning 9000 Btus Hot/Cold Digital Split Air Conditioning, Minimum Cooling Capacity Of 9,000 Btu/H, With Inmetro Classification. Minimum Manufacturers Warranty Of 01 (One) Year. Digital Split Air Conditioning 9000 Btus, Steel Cabinet With Two Doorssteel Cabinet, 1600Mm High, Divided Vertically Into 2 Compartments By Means Of Dividers With Independent Doors, Equipped With 3 Removable And Adjustable Shelves In Each Compartment. Constituents: Steel Sheet Sae 1010/1020. - Body, Dividers And Doors In Sheet Metal 22 (0.75Mm), - Shelves And Door Reinforcement In Sheet Metal 20 (0.90Mm), - Base In Sheet Metal 18 (1.25Mm), - Door Locking Bars O = 1/4 (Minimum), - Hinges In Sheet Metal 14 (1.9Mm). Each Door Must Give Access To An Independent Compartment, Separated By A Vertical Partition. Three Shelves Per Compartment, Removable And Adjustable. Internal Hinges Not Visible On The Outside Of The Furniture With A Minimum Height Of 75Mm - Three Units Per Door. Fully Metal Knob And Handle, Made Of Non-Ferrous Alloy, Chrome-Plated, With Locking Using A Cremona System. Cylindrical Drum Lock Built In The Handle With Min. 4 Pins. Duplicate Keys Attached To The Corresponding Knobs. Printed Or Overlaid Label Holder, The Latter Being Exclusively Made Of Non-Ferrous Chromed Metal Alloy Painted In Epoxy/Polyester Hybrid Powder Paint, Glossy Electrostatic, Oven Polymerized, Minimum Thickness Of 40 Micrometers In Gray Color (See References). Warranty: Minimum Of Three Years From The Date Of Delivery, Against Manufacturing Defects E Oxidacao., 02/06/2026 - 16:47:05, Steel Sliding File Cabinet With Four Drawers Mounted On Telescopic Rails That Allow Full Opening. Dimensions And Tolerances: Height: 1330 Mm /- 10 Mm, Width: 470 Mm /- 10 Mm, Depth: 710 Mm /- 10 Mm, Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Characteristics: Body And Internal Structure In Steel Plate 22 (Thickness 0.75Mm) In Gray Color, Drawers In Plate Steel 24 (0.60Mm), Telescopic Rails And Zinc Plated Guides In Plate 18 (1.20Mm) Or Higher, Drawer Locking Rod In Plate Steel 16 (1.50Mm), Lower Closure (Next To The Floor) In Plate 24 (0.60Mm). Zamac Handles In 96Mm Steel Finish. Cylindrical Drum Lock (Minimum 4 Pins) With Simultaneous Drawer Locking System. Duplicate Keys. Folder Compressors In All Drawers. Printed Or Overlapping Label Holder, The Latter Being Exclusively Made Of Non-Ferrous Metal Alloy, Chromed Or Nickel-Plated. Drawers Equipped With Composite Telescopic Rails
|
