|
Tender For Certain Repair And Polishing To Wooden Furniture Under Ge (South) Pathankot- 1 REPAIR TO CHAIR DINING (FD-279, FD - 1105) 2 Taking out old unserviceable front leg and Supply & Fixing of new front legof size 460mm x55mm x 30mmof existing size & shape made outofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 3 All as per Item Ser No 1.01 above but rear leg of size 890mm long x 55mm x 30mm. 4 All as per Item Ser No 1.01 above but side/back rail 375mm x 30mm x 65mm with drilling hole for canning. 5 All as per Item Ser No 1.01 above but front rail 410mm x 30mm x 65mm with drilling hole for canning. 6 All as per Item Ser No 1.01 above butback rest of size 375mm x 45mm x 20mm 7 All as per Item Ser No.1.01 above butbottom side stiffener of size 375mm x 20mm x 25mm 8 All as per Item Ser No.1.01 above but bottom centre stiffener of size 420mm x 20mm x 25mm 9 Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE 10 Material & labour for polishing of chair after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polishasapproved Make. 11 REPAIR TO CHAIR EASY (FD-229, FD-1108) 12 Taking out old unserviceable front leg and Supply & Fixing of new front legs of size545 mm x55mm x 30mmof existing size & shape made outofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 13 All as per Item Ser No.2.01 above butback leg of size 490mm x 55mm x 30mm 14 All as per Item Ser No.2.01 above but Arm of size610mm x 65mm x 30mm 15 All as per Item Ser No.2.01 above but Seat side frame 575mm x70mm x40mm duly drilling hole for canning. 16 All as per Item Ser No.2.01 above but Seat front frame 510mm x 55mm x 25mm duly drilling hole for half round plastic cane. 17 All as per Item Ser No.2.01 above butseat back frame of size 480mm x 70mm x 40mm duly drilling hole for half round plastic cane. 18 Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE 19 Material & labour for polishing of chair after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polishasapproved Make. 20 REPAIR TO CHAIR WRITING (FD-280) 21 Taking out old unserviceable front leg and Supply & Fixing of new front legof size 685mmx 30 mm x 55 mm of existing size & shape made outofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 22 All as per Item Ser No.3.01 above but rear leg of size 890mm x 30mm x 55mm 23 All as per Item Ser No.3.01 above but front rail of size 505mm x 30mm x 65mm 24 All as per Item Ser No.3.01 above but back rail of size 440mm x 30mm x 65mm 25 All as per Item Ser No.3.01 above but side rail of size 440mm x 30mm x 65mm 26 All as per Item Ser No 3.01 above but back rest of size 440mm x 50mm x 15mm 27 All as per Item Ser No.3.01 above but Arms of size 470mm x 60mm x 25mm 28 All as per Item Ser No.3.01 above but bottom centre stiffener of size 490mm x 25mm x 20mm 29 All as per Item Ser No 3.01 above but bottom side stiffener of size 415mm x25mm x 20mm 30 Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE 31 Material & Labour for polishing of chair after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polishasapproved Make. 32 REPAIR TO CHAIR WRITING WITH CUSHIONED SEAT & BACK (FD-1107) 33 Taking out old unserviceable front leg and Supply & Fixing of new front legof size625mmx 45mm x 25mm of existing size & shape made outofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 34 All as per Item Ser No.4.01 above but rear leg of size 850mmx 45mm x 25mm 35 All as per Item Ser No.4.01 above but front/rear rail of size 495mm x 25mm x 70mm 36 All as per Item Ser No.4.01 above but side rail of size 395mm x 25mm x 70mm 37 All as per Item Ser No.4.01 above but Seat side frameof size 395mm x 30mm x 35mm 38 All as per Item Ser No 4.01 above but seat front/rear frame of size 495mm x 30mm x 35mm 39 All as per Item Ser No.4.01 above but Arms of size 415mm x 60mm x 30mm 40 All as per Item Ser No.4.01 above but stiffener of size 415mm x 25mm x 20mm 41 Taking out old unserviceable foam from back rest of chairand S & F ofnew foam of size 450mm x 250mm x 50mm thick of 32 densityas specified and shown in drg. Make-Feather Foam/Sleep well /Kurlon. 42 Taking out old unserviceable foamfrom seat of chair and S & F of new foam of size 470mm x 470mm x 75mm thick of 32 densityas specified and shown in drg. Make-Feather Foam/Sleep well /Kurlon. 43 Taking out old unserviceable rexine cloth from back rest foam and S & F ofnew rexine cloth for back rest foam of size 450mm x 250mm x 50mm duly stichedas specified and shown in drg.Rexine shall be approved byGE. 44 Taking out old unserviceable rexine cloth from seat foam and S & F ofnew rexine cloth for seat foam of size 470mm x 470mm x 75mm duly stichedas specified and shown in drg.Rexine shall be approved byGE. 45 Material & labour for polishing of chair after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polishasapproved Make. 46 REPAIR TO CHAIR BKB/WB (FD-225, FD -285) 47 Taking out old unserviceable front leg and Supply & Fixing of new front leg of size 455mm x 45mm x 45mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 48 All as per Item Ser No. 5.01 above but rear leg of size 835mm x 65mm x 45mm 49 All as per Item Ser No. 5.01 above but front rail of size 440mm x 65mm x 30mm 50 All as per Item Ser No. 5.01 above but side rail of size 395mm x 65mm x 30mm 51 All as per Item Ser No. 5.01 above but back rail of size 360mm x 65mm x 30mm 52 All as per Item Ser No. 5.01 above but bottom side stiffner 395mm x 25mm x 20mm 53 All as per Item Ser No 5.01 above but bottom centre stiffner of size 395mm x 25mm x 20mm 54 All as per Item Ser No. 5.01 above but back restof size 360mm x 50mm x 15mm 55 Taking out old unserviceable seat andS & F of new seatof size 400mm x 395mmmade outof ply woodcommercial 6 mm thick Make-Century Ply/Kit Ply/Greenply/DURO duly perforated as shown on drg and fixed with steel screws 20 mm dia all as specified and as directed by Engr-in-Charge. 56 Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE 57 Material & labour for polishing of chair after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polishasapproved Make. 58 REPAIR TO BED HARD PLYWOOD TOP (FD-246, FD-247) 59 Taking out old unserviceable long rail and Supply & Fixing of newlong rail 1920mm x 90mm x 35mm made out of well seasonedIst class hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 60 Taking out old unserviceable stiffener and S & F of new stiffener of size 865mm x 60mm x 40mm of well seasoned 1st class hard sheeshamwood duly wrought and ends made to shapeall as shown on drawing and as directedby Engr-in-Charge. 61 Taking out old unserviceable head rest complete and S & F of new head rest complete of size 900mm x460mm made out of well seasoned 1st class hard sheesham wood andplywood one side teak faced 4mm thick Make-Century Ply/Kit Ply/Greenply/Nationalfixedon the frame,Legs made out of sheesham wood of size 660mm x 60mm x 60mm, but 30 x 30mm at bottom, Frame made out of sheesham wood of size 840mm x 45mm x 30mm & plywood of size 840mm x 360mm x 4mm thick, all as shown on drawing and as directedby Engr-in-Charge. 62 Taking out old unserviceable foot rest complete and S & F of new foot rest complete of size 900mm x 300mm made out of well seasoned 1st class hard sheesham wood andplywood one side teak faced 4mm thick Make-Century Ply/Kit Ply/Greenply/Nationalfixedon the frame, Legs made out of sheesham wood of size 500mm x 60mm x 60mm, Frame made out of sheesham wood of size 840mm x 45mm x 30mm& plywood of size 840mm x 220mm x 4mm thick, all as shown on drawing and as directedby Engr-in-Charge. 63 Taking out old unserviceable foot rest plywood and S & F of newone side teak faced 4 mm thick plywood of size 840mm x 230mm x 4mm thick Make-Century Ply/Kit Ply/ Greenply/ National on the foot rest frame with 4mm half round teak wood beading all aroundall as specified and as directed. 64 Taking out old unserviceable head rest plywood and S & F of newone side teak faced 4 mm thick plywood of size 840mm x 350mm x 4mm thick Make-Century Ply/Kit Ply/Greenply/Nationalon the head rest frame with 4mm half round teak wood beading all aroundall as specified and as directed. 65 Taking out old unserviceable plywood and S & F ofnew plywood 1920mm x 900mm x 12 mm thick type AA ISI, BWP, Marked Make-Century Ply/Kit Ply/Greenply/DURO on the top of the bed including takingout old broken/chipped off plywood all as specified and as directed. 66 Taking out old unserviceable and S & F of newL type MS flat Iron 35mm x5mm x 150mm at all corners of bed all as specified and as directed. 67 Material & labour for polishing of bed hard after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the bed hard with French polish asapproved Make. 68 REPAIR TO TABLE WRITING (FD-275, FD-1116) 69 Taking out old unserviceable top and Supply & fixing of new top of size 1145mm x 600mm made out of 18mm thick HDHMR BSL board, (Make- Century ply/ Green ply/Action TESA) with 4 mm teak wood edging all round, all as specified and shown on drawing and as directed by Engineer-in- Charge. 70 Taking out old unserviceable legs and S & F of new legs of size 760mm x 55mm x 35mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 71 All as per Item Ser No 7.02 above but Top front rail of size 650mm x 25mm x50mm. 72 All as per Item Ser No 7.02 above but Top rear rail of size 1090mm x 25mm x 50mm. 73 All as perItem Ser No 7.02 above but Top side rail of size 565mm x 25mm x50mm. 74 All as perItem Ser No7.02 above but bottom side stiffners of size 565mm x 25mm x 50mm. 75 All as per Item Ser No7.02 above but bottom centre stiffener of size 1120mm x 25mm x 50mm. 76 Taking out old unserviceable backs and S & F of new back of size 400mm x 625mm made out of 6mm commercial plywood. All as specified and shown on drawing and as directed by Engineer-in- Charge. 77 Taking out old unserviceable Shutter and S & F new Shutter of size450mm x 375mm made out of 18mm thickHDHMR BSL board, (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round duly fixed with piano hinges with wooden screws and 01 x fancy knobs shall be provided to the shutter as directed by Engineer-in-charge. 78 Taking out old unserviceable drawer and S & F ofnewdrawers of size 550mm x 100mm both side & 355mm x 100mm back side made out of 12 mm thick plywood commercial plywood execpt bottom and front. Bottom shall be 6mm ply wood commercial of size 550mm x 355mm.Front portion of drawer shall be made out of 18mm thickHDHMR BSL board, with 4 mm teak wood edging all round of size 355mm x 100mm with fancy knob shall be provided.All as specified, shown on drawing and as directed by Engineer-in- Charge. 79 Material & labour for polishing of table writing after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table writing with French polishasapproved Make. 80 REPAIR TO TABLE 900 x 600 x 760 MM WITHOUT DRAWER (FD-284) 81 Taking out unserviceable top of table andSupply & Fixingof New top of size 900mm x 600mm made out of 18mm thick HDHMR BSL board, (Make- Century ply / Green ply/Action TESA)with 4 mm teak wood edging all round all as specified, shown on drawing and as directed by Engineer-in- Charge 82 Taking out unserviceable legs of table andSupply & Fixingof New leg of size 760mm x 60mm x 30mm made out ofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 83 All as per Item Ser No 8.02 above but Top front/rear rail of size 840mm x 20mm x 60mm 84 All as perItem Ser No 8.02 above but Top side rail of size 570mm x 20mm x 60mm 85 All as per Item Ser No 8.02 above but bottom stiffener of size 880mm x 20mm x 60mm. 86 All as perItem Ser No 8.02 above but bottom side rail of size 570mm x 20mm x 60mm. 87 Material & labour for polishing of table after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table with French polish asapproved Make. 88 REPAIR TO TABLE WITH DRAWER (900 x 600 x 760 MM) FD-283 89 Taking out unserviceable top of table andSupply & Fixingof New top of size 900mm x 600mm made out of 18mm thick HDHMR BSL board, (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round all as specified, shown on drawing and as directed by Engineer-in- Charge 90 Taking out unserviceable legs of table andSupply & Fixingof New leg of size 760mm x 60mm x 30mm made out ofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 91 All as per Item Ser No 9.02 above but Top rear rail of size 840mm x 20mm x 110mm 92 All as perItem Ser No 9.02 above but Top side rail of size 570mm x 20mm x 110mm . 93 All as per Item Ser No 9.02 above but bottom stiffener of size 880mm x 20mm x 60mm. 94 All as perItem Ser No 9.02 above but bottom side rail of size 570mm x 20mm x 60mm. 95 Taking out old unserviceable drawer and S & F ofnewdrawers of size 550mm x 100mm both side & 350mm x 100mm back side made out of 12 mm thick plywood commercial plywood execpt bottom and front. Bottom shall be 6mm ply wood commercial of size 550mm x 350mm.Front portion of drawer shall be made out of Ist class well seasoned hard sheesham wood of size 350mm x 100mm with Fancy knob.All as specified, shown on drawing and as directed by Engineer-in- Charge. 96 Material & labour for polishing of table after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table with French polish asapproved Make. 97 REPAIR TO TABLE DRESSING LADIES (FD-251, FD -378) 98 Taking out unserviceable drawer and Supply & Fixing of new drawerof size 425 mm x 365mm x 140mm.Both Sides & back made out of 12mm thick commercial plywoodside size shall be365mm x 140mm & back shall be 425mm x 140mm.Bottom shall be made of 6mm ply wood commercial of size 425mm x 365mm.Front portion of drawer shall beHDHMR BSL board,18mm of size 425mm x 140mm with Fancy knob.All as specified, shown on drawing and as directed by Engineer-in- Charge. 99 Taking out unserviceable mirror with frame and S & F of new Electro copper plated mirror 5.5mm thickx 1220 mm x 366mm Make- Modiguard/Saint Gobind with Teak wood beading 25mm x 20mm and back frameof size 1250mm x 45mm x 35mm & 400mm x 45mm x 35mm all as per Drg. 6mm commercial plywood of size 1250mm x 400mm shall be provided to back support to the mirror frame of approved make. all as specified, shown on drawing and as directed by Engineer-in- Charge. 100 Taking out unserviceable glass and S & F of new glass plain 6mm of size 425mm x 365mm x 140mm as per Drg. 101 Taking out unserviceable aluminium channel and S & F of new aluminium channel of size 870mm x 20mm x 15mm, all as specified, shown on drawing and as directed by Engineer-in- Charge. 102 Taking out unserviceable back side plywood and S & F of new ply wood commercial 6mm of 900mm x 380mm as per Drg. 103 Material and labour for polishing of table dressing ladies after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table dressing ladies with French polish asapproved Make. 104 REPAIR TO TABLE DRESSING GENTS (FD-230, FD -379) 105 Taking out unserviceable drawer and Supply & Fixing of new drawerof size 298mm x 276mm x 120mm .Both Sides & back made out of 12mm thick commercial plywood side size shall be276mm x 120mm.Bottom shall be made of 6mm ply wood commercial of size 298mm x 276mm.Front portion of drawer shall be made out of 12mm thick HDHMR BSL board,of size 298mm x 120mmwith fancy knob.All as specified, shown on drawing and as directed by Engineer-in- Charge. 106 Taking out unserviceable mirror with frame and S & F of new Electro copper plated mirror 5.5mm thick x 760mm x 380mm Make- Modiguard/Saint Gobind with Teak wood frame of size 800mm x 25mm x 35mm& 425 x 25mm x 35mm as per Drg.6mm commercial plywood of size 800mm x 425mm shall be provided to back support to the mirror frame of approved make. all as specified, shown on drawing and as directed by Engineer-in- Charge. 107 Material and labour for polishing of table dressing gents after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table dressing gents French polishasapproved Make. 108 REPAIR TO TABLE DINING 6 PERS (FD-273) 109 Taking out unserviceable top of table dinning 6 pers and Supply & Fixing of new top of size 1500mm x 900mm of 18mm thickHDHMR BSL board, (Make- Century ply / Green ply/Action TESA) 4 mm teak wood edging all round.(Make- Century ply / Green ply/Action TESA) all as specified, shown on drawing and as directed by Engineer-in- Charge. 110 Taking out unserviceable legs of table andSupply & Fixingof New leg of size 760mm x 75mm x 40mm made out ofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 111 All as perItem Ser No 12.02 above but Top Front/Rearrail ofsize 1425mm x100mm x 25mm 112 All as perItem Ser No 12.02 above but Top Side rail of size 860mm x 100mm x 25mm 113 All as perItem Ser No 12.02 above but Top stiffner ofsize 860mm x 100mm x 25mm 114 Material and labour for polishing of table dining 6 Pers after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table dining with French polish asapproved Make. 115 REPAIR TO TABLE 900 x 900 x 760 MM (FD-291) 116 Taking out unserviceable top of table and Supply & Fixing of new top of size 900mm x 900mm of 18mm thickHDHMR BSL board (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round.all as specified, shown on drawing and as directed by Engineer-in- Charge. 117 Taking out unserviceable leg, Supply & Fixing of new legof size 760mm x 55mm x35mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 118 All as perItem Ser No 13.02 above but Front/Rear/Side rail of size 845mm x 75mm x 25mm. 119 Material and labour for polishing of table after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table with French polishasapproved Make. 120 REPAIR TO STOOL DRESSING CB (FD-252,282) 121 Taking out the unserviceable front legs of Stool Dressing CB and Supply & fixing new Front legs of suitable size, made of teak all as directed by Engr-in-Charge. 122 Same as sl no 14.01 but side stiffners size 19x25mm 123 Same as sl no 14.01 but centre stiffners size 19x25mm 124 Same as sl no 14.01 but Long Rail size 25x50 mm 125 Same as sl no 14.01 but Short rails size 19x25mm 126 Material and labour for polishing of stool dressingafter cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the Stool dressing CB with French polishasapproved Make. 127 REPAIR TO TEAPOY (FD-278, FD-382, FD-232) 128 Taking out unserviceable top of teapoy and Supply & Fixing of new top of size 600mm x 450mm of 18 mm thickHDHMR BSL board, (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round,all as specified, shown on drawing and as directed by Engineer-in- Charge. 129 Taking out unserviceable legs of teapoy andSupply & Fixingof New leg of size 540mm x 30mm x 60mm made out ofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 130 All as perItem Ser No 15.02 above but Top Front/Rear rail/Bottom stiffener of size 540mm x20mm x50mm. 131 All as perItem Ser No 15.02 above but Top Side rail/Bottom rail of size 420mm x 20mm x 50mm. 132 Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE 133 Material and labour for polishing of Teapoy after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the teapoy with French polish asapproved Make. 134 REPAIR TO PEG TABLE (FD-277, FD-384, FD-390, FD-1114) 135 Taking out unserviceable top of Pegtableand Supply & Fixing of new top of size 450mm x300mm of 18 mm thick HDHMR BSL board, (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round,all as specified, shown on drawing and as directed by Engineer-in- Charge. 136 Taking out unserviceable legs of peg table andSupply & Fixingof New leg of size 380mm x 30mm x 50mm made out ofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 137 All as perItem Ser No 16.02 above but Top Front/Rear rail of size 400mm x 20mm x 40mm. 138 All as perItem Ser No 16.02 above but Top Side rail of of size 270mm x 20mm x 40mm. 139 Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE 140 Material and labour for polishing of Pegtable after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the peg table with French polishasapproved Make. 141 REPAIR TO CENTRE TABLE (FD-274, FD-275) 142 Taking out unserviceable top of centre tableand Supply & Fixing of new top of size 900mm x450mm of 18 mm thick HDHMR BSL board, (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round, all as specified, shown on drawing and as directed by Engineer-in- Charge. 143 Taking out unserviceable legs of centre table andSupply & Fixingof New leg of size 400mm x 30mm x 60mm made out ofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 144 All as perItem Ser No 17.02 above but Top Front/Rear rail/ Bottom stiffener of size 840mm x 20mm x 50mm 145 All as perItem Ser No 17.02 above but Top Side rail/bottom rail of size 430mm x 20mm x 50mm. 146 Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE 147 Material and labour for polishing of table centre after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table centre with French polishasapproved Make. 148 REPAIR OF TABLE OFFICE CLERK WOODEN (FD-31) 149 Taking out unserviceable top of tableand Supply & Fixing of new top of size 1380mm x 840mm of 18 mm thickHDHMR BSL board, (Make- Century ply / Green ply/Action TESA)with 4 mm teak wood edging all round, all as specified, shown on drawing and as directed by Engineer-in- Charge. 150 Taking out unserviceable legs and S & F new legs of size 740mm x 50mm x 50mm made out ofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 151 All as per srl 18.02 above butTop Front/rear rail of size 1350mm x50mm x 25mm 152 All as per srl 18.02 above butTopside rail of size 770mm x 50mm x 25mm 153 All as per srl 18.02 above but bottom rail of size 770mm x 50mm x 25mm. 154 All as per srl 18.02 above butcentre stiffner of size 1380mm x 50mm x 25mm. 155 Taking out unserviceable drawer andS & F new drawer made out of 12mm thick commercial plywood grade of size 500mm x 350mm x 250mm except front & bottomportion of drawer.Front portion of drawer shall be of size 500mm x 250mm of 18mm thickHDHMR BSL board & bottom of size 500mm x 350mm x 250mm shall be made of 6mm plywood commercial & Fancy knobto be fixed as shown on drawing complete all as specified and as directed by Engineer-in- Charge. 156 Material and labour for polishing of table office clerk wooden after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table office clerk with French polishasapproved Make. 157 REPAIR TO SOFA SET, 5 SEATER ( 1 THREE SEATER AND 2 SINGLE SEATER)(FD-281, FD-1113) 158 Taking out unservieable cushion and Supply & fixing of new cushion of size 560mm x 530mm x 100mm of 32 density Make-Feather Foam/Sleep well /Kurlon, duly covered with tapestrycloth with chain systemfor seat and back of sofa set five seaters (Set of 10 pieces).cloth not less than Rs 300/- per mtr as approved by GE all as specified and shown on drgs. 159 Taking out unservieable cushion cover and Supply & fixing of newcushion cover of size 560mm x 530mm for seat and back of sofa set duly stichedwith tapestry cloth with chain system.Cloth not less than Rs 300/- per mtr as approved by GE. 160 Taking out u/s legs from sofa and S & Flegs made out of 70x35 mm in section of hardwood(MP teak) 161 Taking out u/s arms from sofa and S & F arms made out of 70x35 mm in section of hardwood(MP teak) 162 Taking out u/s Front long rails from sofa and S & Ffront long rail made out of 100x35 mm in section of hardwood(MP teak) 163 Taking out u/s side rails from sofa and S & F side rails made out of 100x35 mm in section of hardwood(MP teak) 164 Taking out u/s battens from sofa and S & Fbattensmade out of 50x20 mm in section of hardwood(MP teak) 165 M & Lfor polishing to Sofa set 5 Seater after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paperasapproved Make. 166 REPAIR TO SOFA SET, 4 SEATER (4 SINGLE SEATER)(FD-1113) 167 Taking out unservieable cushion and Supply & fixing of new cushion of size 560mm x 530mm x 100mm of 32 density Make-Feather Foam/Sleep well /Kurlon, duly covered with tapestrycloth with chain systemfor seat and back of sofa set 4 seaters (Set of 8 pieces).cloth not less than Rs 300/- per mtr as approved by GE all as specified and shown on drgs. 168 Taking out unserviceable cushion cover and Supply & fixing of newcushion cover of size 560mm x 530mm for seat and back of sofa set duly stichedwith tapestry cloth with chain system.Cloth not less than Rs 300/- per mtr as approved by GE. 169 Taking out u/s legs from sofa and S & Flegs made out of 70x35 mm in section of hardwood(MP teak) 170 Taking out u/s arms from sofa and S & F arms made out of 70x35 mm in section of hardwood(MP teak) 171 Taking out u/s Front long rails from sofa and S & Ffront long rail made out of 100x35 mm in section of hardwood(MP teak) 172 Taking out u/s side rails from sofa and S & F side rails made out of 100x35 mm in section of hardwood(MP teak) 173 Taking out u/s battens from sofa and S & Fbattensmade out of 50x20 mm in section of hardwood(MP teak) 174 M & Lfor polishing to Sofa set 4 Seater after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paperasapproved Make. 175 REPAIR TO TABLE BED SIDE WOODEN (FD-276) 176 Taking out unserviceable top/shelf/bottom of table bed side, Supply & Fixing of new top/shelf/bottom of size 375mmx300mmx12mm plank of Ist class hard sheesham wood of existing size and shape.All as specified, shown on drawing and as directed by engineer-in- Charge. 177 Taking out unserviceable left/right side, Supply & Fixing of newleft/right side of size 435mm x 300mm x12mm plank of Ist class hard sheesham wood of existing size and shape.All as specified, shown on drawing and as directed by engineer-in- Charge. 178 Taking out unserviceable back oftable bed sideand supply & fixing of new back of size 435mm x 375mm x 6mm plywood commercial.All as specified, shown on drawing and as directed by engineer-in- Charge. 179 Material and labour for polishing of table bed side after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table bed side with French polish Make-Salimar asapproved. 180 REPAIR TO TABLE OFFICE OFFICER WOODEN (FD-32, DB - 4122) 181 Taking out unserviceable top of tableand Supply & Fixing of new top of size 1680mm x 870mm of 18 mm thickHDHMR BSLboard, (Make- Century ply / Green ply/Action TESA)with 4 mm teak wood edging all round, all as specified, shown on drawing and as directed by Engineer-in- Charge. 182 Taking out unserviceable drawer andS & F new drawer made out of 12mm thick commercial plywood grade of size 500mm x 350mm x 250mm except front & bottomportion of drawer.Front portion of drawer shall be of size 500mm x 250mm of 18mm thick HDHMR BSL board & bottom of size 500mm x 350mm x 250mm shall be made of 6mm plywood commercial & Fancy knobto be fixed as shown on drawing complete all as specified and as directed by Engineer-in- Charge. 183 Material and labour for polishing of table office officer wooden after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the table office officer wooden with French polishasapproved Make. 184 RECANNING OF CHAIRS (FD-279, FD - 1105, FD-229, FD-1108, FD-280) 185 Taking down old cane from the all type of Chairs dining,Chair Writing,Chair Easy and re-canning with 2 to 2.5 mm wide half round new plastic cane in Godrej pattern with 3 strands in two in central holes both way (in place of two in other holes using minimum weight of cane mentioned below and complete all as per drawing and as directed. 186 REPAIR TO CHAIR DINNING MAP (FD/MAP-II/04) 187 Taking out the unserviceable parts of Chair. Supply & fixing new parts of suitable size, made of teak wood. (a) Front legs 188 Same as sl no 24.01 but Rear Legs 189 Same as sl no 24.01but Vertical Strips 190 Same as sl no 24.01 but Front & Back Rails 191 Same as sl no 24.01 but Side Rails 192 Same as sl no 24.01 but T/W stopper75x75x25mm 193 Same as sl no 24.01 but T/W stiffners 20x25mm 194 Same as sl no 24.01 but nylon buffers fitted to legs 195 Same as sl no 24.01 but seat made with 75mm thick 40 density foam with febric not less than Rs 350/mtr on 12mm thick plywood BWR of existing size 196 Material and labour for polishing of CHAIR DINNING MAPafter cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair dining map with French polishasapproved Make. 197 REPAIR TO SIDE BOARD (FD-1112) 198 S & F new sidesafter removing old u/s sides of 19 mm pre laminated particle board of size 675X450mm with 4mm TW edging 199 S & F new Top after removing old u/s top of 19 mm pre laminated particle board of existing size 1025X450mm with 4mm TW edging 200 S & F new shutter after removing old u/s shutter of 19 mm pre laminated particle board of existing sizewith 4mm TW edging including hinges, handles and magnet catcher 201 S & F new Drawer after removing old u/s drawer of 19 mm pre laminated particle board of existing sizewith 4mm TW edging including 20X20 mm TW bearer and handles 202 S & F new legs Frame 75X25 mm thick TW as shown on drg 203 S & F new stiffners 25X25 mm thick TW as shown on drg 204 S & F new handles after removing old u/s handles size 100 mm long ms powder coated 205 Material and labour for polishing of Side Boardafter cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the side board with French polishasapproved Make. 206 HAT STAND WITH MIRROR (FD-233, 1110) 207 Taking out unserviceable wooden Rails from frame and Supply & Fixing of new wooden Rails ofsize 20x50mm(MP TEAK). 208 Taking out unserviceable Teak ply from Hat Standand Supply & Fixing of new Teak ply 4mm ofsize 1000x710mm . 209 Taking out unserviceable mirror from frame and Supply & Fixing of new mirror 5.5mm size300x400mm ofapproved Make. 210 Taking out unserviceable pegs from Hat Stand and Supply & Fixing of new Brass pegs of size120x75mm. 211 Taking out Key Plates from Hat Stand and Supply & Fixing of new Key Platesof 3mm thick of mild steel as shown on drg 212 Material and labour for polishing Hat Stand of after cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the Hat Stand with French polishasapproved Make. 213 ALMIRAH MEDIUM WOODEN WITH SHELVES DB-3050,4042 214 Removing unserviceable shelf and supply and fixing new shelf made out of 20mm thick 1st class hard wood plank of size 950mm x 450mm, polishing with Hi-gloss French polish includingpreparation of surfaces and taking out existing unserviceable shelf complete all as specified, shownon drgs and specified. 215 Removing unserviceable leg and supply and fixing new leg made out of 1st class hard wood of existing size and shape including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on drawing and as directed. 216 Removing unserviceable hasp and supply and fixing new hasp and staple aluminum anodised Make - Jyoti/Ajanta/Mowjee of size 100mm (as per sample) complete all as specified, shown on drawing and as directed. 217 Material and labour for polishing of Almirah med wooden with shelvesafter cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the almirah medium wooden with French polishasapproved Make. 218 CHAIR DINNING WITH LONG BACK (FD-357) 219 Taking out old unserviceable front leg and Supply & Fixing of new front legof size 450mm x25mm x 50mmof existing size & shape made outofIst class well seasoned hard sheesham wood with bamboo pins and synthetic resinadhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides.All as per shown in drg and as directed by Engineer-in- Charge. 220 All as per Item Ser No 28.01 above but rear leg of size 450mm long x 65mm x 50mm. 221 All as per Item Ser No 28.01 above but side/back rail 450mm x 40mm x 20mm 222 All as per Item Ser No. 28.01 above buttwo side stiffener of size 450mm x 25mm x 40mm 223 All as per Item Ser No. 28.01 above butmiddle stiffener of size 450mm x 25mm x 40mm 224 Taking out old unserviceable foam from back rest of chairand S & F ofnew foam as per existing size of 50mm thick of 32 density with 10mm teak wood of best quality as specified and shown in drg. Make-Feather Foam/Sleep well /Kurlon. 225 Taking out old unserviceable foamfrom seat of chair and S & F of new foam as per existing size of 50mmthick of 32 density with 12mm teak wood of best qualityas specified and shown in drg. Make-Feather Foam/Sleep well /Kurlon. 226 Taking out old unserviceable rexine cloth from back rest foam and S & F ofnew rexine cloth for back rest foam as per existing size of best quality duly stichedas specified and shown in drg.Rexine shall be approved byGE.Rate of rexine shall not be less than Rs.200/- per RM. 227 Taking out old unserviceable rexine cloth from seat foam and S & F ofnew rexine cloth for seat foam as per existing size of best quality duly stichedas specified and shown in drg.Rexine shall be approved byGE.Rate of rexine shall not be less than Rs.200/- per RM. 228 Material & labour for polishing of chair after cleaning,smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polishasapproved Make. 229 BIN SOIL LINEN MULTIPURPOSE FD - 1104/212/244 230 Taking out unserviceable sides from Bin Soil Linen Multipurpose and S & F new sidesafter removing old u/s sides of 19 mm pre laminated particle board of size 900X280X75 mm shall be approved by GE. 231 S & F new Top after removing old u/s top of 19 mm pre laminated particle board of existing size 1000x380mm with 4mm TW edging 232 S & F new shutter after removing old u/s shutter as per existing size which shown on drawing. 233 S & F new handles after removing old u/s handles size 100 mm long ms powder coated shall be approved by GE. 234 Material and labour for polishing of Bin Soil Linen Multipurposeafter cleaning, smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the Bin Soil Linen Multipurpose with French polishasapproved Make. 235 Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.(ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.
|