|
Supplying Fixing & Installation Of Furniture & Necessary Items, All Complete Job At Newly Constructed Building Of 300 Ladies Barrack, Multi- Gym, 200 Ladies Barrack And Class Room For Basic Training At Bsap-06 Muzaffarpur In The District Of Muzaffarpur-1 3 Seater Bench Cum Desk of Size (mm)- (1840 mm W x 1130 mm D x 757 mm H). Desk-Top Panel-All panels are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides.The panels have cornersrounded for safety usage Understructure:All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating.Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating.The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the radesk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating.The understructure is assembled using M6 trilobularscrews(As per DIN 7500)with Zn blue plating. Compact Laminate seat and back panels are assembled using M6 Countersunk Trilobular screws(as per DIN 7500) with Zn Black Plating (As per IS 1573:1986) Spacers Are provided on th top of round tubes for wooden panels fixing. They are made of made Glass filled (30%) Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product. M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 2 Wooden Podium 3 Table 1500 Without CPU Hanger of Size(mm)- 1500 x 750 x 728- (Approx.) Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester)(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 4 Fabric Full Back Chair- SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors).*FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H) *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 5 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 300 Womens Barrack Visitors Room 6 Wooden Reception Table 5 Feet of Size(mm)- 1500W X 725D X 740H- Work Surface- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management.Wire Management- Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel and Side Skirting- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Understrucrure- Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Top Shelf- Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer Unit- Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 7 Fabric Full Back Chair- SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors).*FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H) *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 8 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) Kindergarten 9 Steel Table -made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 10 Garten Chair- Shell- The Single Piece seat back shell is made up of injection moulded high compact strength glass filled polypropleyne ploymer compound.Ms Powder Coated Under structure- The powder coated DFT welded tubler frane is made from 0.22 +_ 0.3cm x 0.16+_0.0128 cm MS ERW tube. The shoe is made of high impact strength polyproplyene polymer compound and are fitted at the end of the tublar frame.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) Dining Hall 11 6 Seater Dining Table PU Coated of Size shall be 1734 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 12 Dining Chair Chair- Shell- The Single Piece seat back shell is made up of injection moulded high compact strength glass filled polypropleyne ploymer compound.Ms Powder Coated Under structure- The powder coated DFT welded tubler frane is made from 0.22 +_ 0.3cm x 0.16+_0.0128 cm MS ERW tube. The shoe is made of high impact strength polyproplyene polymer compound and are fitted at the end of the tublar frame.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) Doctors Room 13 Doctors Table 1500 Without CPU Hanger of Size(mm)- 1500 x 750 x 728- (Approx.) Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester)(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 14 High Back Chair with Adjustable Armrest - SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylenein-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyesterfabric. Full Back Size: 45.5 cm. (W) x 53.0 em. (H), Seat Size :48.5 cm. (W) x 47.0 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density 4542 kg/m’, and hardness load 16 + 2 kgf as per IS:7888 for 25% compression, TILT MECHANISM, SPINES & SPINE CONNECTOR:Theseat and backare firmly connected to the base frame and are cantilevered in such a waythat it gives a multi-dimensional movementpossibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines mouldedin high strength glass-filled Poly-amide and the spine connector mouldedin glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature whichis inbuilt in seat base and the tension (return force) is user weight dependent.ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6+/-0.5cm. The Armrest Top is made up of integral skin PU moulded overplastic inner mouldedin glass-filled Poly-amide.PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 + 0.3 cm, PEDESTAL ASSEMBLY: The pedestal is injection mouldedin glass-filled Poly-amide and fitted with 5 nos. & fw wheel castors. The pedestal is 66.0£0.5 cm. pitch centre diameter and 76.0+1.0 cm. with castors, TWIN WHEEL CASTORS:5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0+/-0.1cm Overall Size-76W x 76D x 99.5-108.8H x 44.5-53.8 cm SH(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 15 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 16 Storwel Plain with Four Shelves - Almirah of size 1981 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate and Product should have Green Guard by U/L Certified) 17 EXAMINATION COUCH FULL STORAGE WITH STEP STOOL- Overall dimension 1975 mm (L) x 560 mm ( W) x 805 mm (H). Examination couch with three drawers with three cabinets, inbuilt step stool and BP tray holder.the base frame should made of 30 mm x 30 mmX 1.6 thick ERW tube. The cabinets should made of 1 mm thick CRCA sheet with recessed plastic handles and with lock and plastic door latch. the hindges of the cabinet should be made of sheet metal and pin arrangement. The internal dimension of the two side cabinets should be 422 mm (W) x 455 mm (D) x 540 mm (H). the internal dimension of the centarl cabinet should be 422 mm (W) x 455 mm (D) x 358 mm (H). The storage cabinet unit should be mount tubular base frame. The head rest should be adjustable on gas spring which should be actuated with C shaped handle lever .The drawers should made of 1 mm thick CRCA sheet with recessed plastic handles and work on double extension ball slides for smooth glide. the internal dimension of the drawer should be 330 mm (W) x 427 mm (D) x 92 mm (H) The mattress platform should be 65 mm thick which is made of 12 mm thick ply and PU foam and covered with leatherite cover.the cover should be water resistant, fire retuardant, aniti micraobial . the cover should have in-vitro cytotoxicity test report from reputed test lab. the end of the top mattress surface should be tapered end edge for ergonomic benifit. There should be ss304 made tissue roll holder present on the lower side of the back rest. There should be 1 mm thick CRCA made step stool with leveler with double extension ball slide for smooth operation. There should be 1 mm thick CRCA made BP aparatus holder which should be adjustable in height on a SS made height adjustable rod. Total load bearing capacity should be 135 kg. The examination couch should be provided with six numbers levelers made of metal & plastic for adjustment on the uneven floor. All the metal parts should be pre treated and powder coated with epoxy polyester powder coating. The examination couch should have CE certification from any notifying agency or its Indian counterpart, the manuafacturer shoudl have ISO 13485:2016 certfication from any notifying agency.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) 18 Stool Heght Adjstable- Overall Dimension: Overall Sizes Diagonal Leg Dia 538 mm H470 min-655max Top plate should made of SS 202 made sheet with spin section of thickness 1mm & should be non corrosive. It should have a diameter of 305mm, seat base should made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm should be used for height adjustment of the seat base. The round hub should be made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub should be welded with the legs and it should accommodate and cover the lead screw mechanism. The understructure should consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg should give a round & clean look. All the legs should be provided with 4 nos of Nylon-6 bush. All metal components should be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbial epoxy polyster powder coating to fulfill the requirements for bacterial protection against at least 2 commonly found bacteria in Hospital environment [Gram positive and Gram Negative]. Safe working load must be 135kg (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) Doctors Room 2 19 Pateint Bed Ayush Semi Fowler Bed of size 2265L x 900W x 610H mm : Ayush semi fowler bed is a single function bed, which has adjustable backrest and a fixed lower section. Dimension:(L)2268 mm X (W)922 mm X(H)610 mm. Higher diameter tube provides a sturdy understructure.snap locking handle lever with handle body keep it in folding position when not in use. Sheet metal lying surface of 1.0 mm thickness.Diagonal locking provides better stability to bed in the locked position.Provision of mounting of mosquito pole (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) 20 Godrej Patient Mattress 2 Section- (W)1965*(W)830*(H)100 The bed should be provided with 40 density 100 mm thick PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) 21 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 22 Steel Table -made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 23 High Back Chair with Adjustable Armrest - SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylenein-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyesterfabric. Full Back Size: 45.5 cm. (W) x 53.0 em. (H), Seat Size :48.5 cm. (W) x 47.0 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density 4542 kg/m’, and hardness load 16 + 2 kgf as per IS:7888 for 25% compression, TILT MECHANISM, SPINES & SPINE CONNECTOR:Theseat and backare firmly connected to the base frame and are cantilevered in such a waythat it gives a multi-dimensional movementpossibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines mouldedin high strength glass-filled Poly-amide and the spine connector mouldedin glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature whichis inbuilt in seat base and the tension (return force) is user weight dependent.ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6+/-0.5cm. The Armrest Top is made up of integral skin PU moulded overplastic inner mouldedin glass-filled Poly-amide.PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 + 0.3 cm, PEDESTAL ASSEMBLY: The pedestal is injection mouldedin glass-filled Poly-amide and fitted with 5 nos. & fw wheel castors. The pedestal is 66.0£0.5 cm. pitch centre diameter and 76.0+1.0 cm. with castors, TWIN WHEEL CASTORS:5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0+/-0.1cm Overall Size-76W x 76D x 99.5-108.8H x 44.5-53.8 cm SH(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) Store 24 Steel Rack 6 Feet - Size (mm)- 1828 H x 914 W x 457 D General Room 25 Steel Table -made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 26 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 27 Storwel Plain with Four Shelves - Almirah of size 1981 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate and Product should have Green Guard by U/L Certified) 200 Womens Barrack Visitors Room 28 Reception Table 5 Feet of Size(mm)- 1500W X 725D X 740H- Work surface- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management.Wire Management- Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel and Side Skirting- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Understrucrure- Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Top Shelf- Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer Unit- Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 29 Fabric Full Back Chair- SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair.TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors).*FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H) *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 30 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) Kindergarten 31 Steel Table-made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 32 Kinder Garten Chair - Shell- The Single Piece seat back shell is made up of injection moulded high compact strength glass filled polypropleyne ploymer compound.Ms Powder Coated Under structure- The powder coated DFT welded tubler frane is made from 0.22 +_ 0.3cm x 0.16+_0.0128 cm MS ERW tube. The shoe is made of high impact strength polyproplyene polymer compound and are fitted at the end of the tublar frame.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) Dining Hall 33 Dining Table 6 Seater PU Coated of Size shall be 1734 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 34 Dining Chair - Shell- The Single Piece seat back shell is made up of injection moulded high compact strength glass filled polypropleyne ploymer compound.Ms Powder Coated Under structure- The powder coated DFT welded tubler frane is made from 0.22 +_ 0.3cm x 0.16+_0.0128 cm MS ERW tube. The shoe is made of high impact strength polyproplyene polymer compound and are fitted at the end of the tublar frame.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) Doctors Room 35 Doctors Table 1500 Without CPU Hanger of Size(mm)- 1500 x 750 x 728- (Approx.) Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester)(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 36 High Back Chair with Adjustable Armrest - SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylenein-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyesterfabric. Full Back Size: 45.5 cm. (W) x 53.0 em. (H), Seat Size :48.5 cm. (W) x 47.0 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density 4542 kg/m’, and hardness load 16 + 2 kgf as per IS:7888 for 25% compression, TILT MECHANISM, SPINES & SPINE CONNECTOR:Theseat and backare firmly connected to the base frame and are cantilevered in such a waythat it gives a multi-dimensional movementpossibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines mouldedin high strength glass-filled Poly-amide and the spine connector mouldedin glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature whichis inbuilt in seat base and the tension (return force) is user weight dependent.ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6+/-0.5cm. The Armrest Top is made up of integral skin PU moulded overplastic inner mouldedin glass-filled Poly-amide.PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 + 0.3 cm, PEDESTAL ASSEMBLY: The pedestal is injection mouldedin glass-filled Poly-amide and fitted with 5 nos. & fw wheel castors. The pedestal is 66.0£0.5 cm. pitch centre diameter and 76.0+1.0 cm. with castors, TWIN WHEEL CASTORS:5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0+/-0.1cm Overall Size-76W x 76D x 99.5-108.8H x 44.5-53.8 cm SH(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 37 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 38 Storwel Plain with Four Shelves - Almirah of size 1981 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate and Product should have Green Guard by U/L Certified) 39 EXAMINATION COUCH FULL STORAGE WITH STEP STOOL- Overall dimension 1975 mm (L) x 560 mm ( W) x 805 mm (H). Examination couch with three drawers with three cabinets, inbuilt step stool and BP tray holder.the base frame should made of 30 mm x 30 mmX 1.6 thick ERW tube. The cabinets should made of 1 mm thick CRCA sheet with recessed plastic handles and with lock and plastic door latch. the hindges of the cabinet should be made of sheet metal and pin arrangement. The internal dimension of the two side cabinets should be 422 mm (W) x 455 mm (D) x 540 mm (H). the internal dimension of the centarl cabinet should be 422 mm (W) x 455 mm (D) x 358 mm (H). The storage cabinet unit should be mount tubular base frame. The head rest should be adjustable on gas spring which should be actuated with C shaped handle lever .The drawers should made of 1 mm thick CRCA sheet with recessed plastic handles and work on double extension ball slides for smooth glide. the internal dimension of the drawer should be 330 mm (W) x 427 mm (D) x 92 mm (H) The mattress platform should be 65 mm thick which is made of 12 mm thick ply and PU foam and covered with leatherite cover.the cover should be water resistant, fire retuardant, aniti micraobial . the cover should have in-vitro cytotoxicity test report from reputed test lab. the end of the top mattress surface should be tapered end edge for ergonomic benifit. There should be ss304 made tissue roll holder present on the lower side of the back rest. There should be 1 mm thick CRCA made step stool with leveler with double extension ball slide for smooth operation. There should be 1 mm thick CRCA made BP aparatus holder which should be adjustable in height on a SS made height adjustable rod. Total load bearing capacity should be 135 kg. The examination couch should be provided with six numbers levelers made of metal & plastic for adjustment on the uneven floor. All the metal parts should be pre treated and powder coated with epoxy polyester powder coating. The examination couch should have CE certification from any notifying agency or its Indian counterpart, the manuafacturer shoudl have ISO 13485:2016 certfication from any notifying agency.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product having CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) 40 Stool Heght Adjstable- Overall Dimension: Overall Sizes Diagonal Leg Dia 538 mm H470 min-655max Top plate should made of SS 202 made sheet with spin section of thickness 1mm & should be non corrosive. It should have a diameter of 305mm, seat base should made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm should be used for height adjustment of the seat base. The round hub should be made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub should be welded with the legs and it should accommodate and cover the lead screw mechanism. The understructure should consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg should give a round & clean look. All the legs should be provided with 4 nos of Nylon-6 bush. All metal components should be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbial epoxy polyster powder coating to fulfill the requirements for bacterial protection against at least 2 commonly found bacteria in Hospital environment [Gram positive and Gram Negative]. Safe working load must be 135kg (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product having CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) Doctors Room 2 41 Pateint Bed Ayush Semi Fowler Bed of size 2265L x 900W x 610H mm : Ayush semi fowler bed is a single function bed, which has adjustable backrest and a fixed lower section. Dimension:(L)2268 mm X (W)922 mm X(H)610 mm. Higher diameter tube provides a sturdy understructure.snap locking handle lever with handle body keep it in folding position when not in use. Sheet metal lying surface of 1.0 mm thickness.Diagonal locking provides better stability to bed in the locked position.Provision of mounting of mosquito pole (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product having CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) 42 Patient Mattress 2 Section- (W)1965*(W)830*(H)100 The bed should be provided with 40 density 100 mm thick PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product having CE Certificaye ) 43 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product having CE Certificaye ) 44 Steel Table-made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 45 High Back Chair with Adjustable Armrest - SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylenein-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyesterfabric. Full Back Size: 45.5 cm. (W) x 53.0 em. (H), Seat Size :48.5 cm. (W) x 47.0 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density 4542 kg/m’, and hardness load 16 + 2 kgf as per IS:7888 for 25% compression, TILT MECHANISM, SPINES & SPINE CONNECTOR:Theseat and backare firmly connected to the base frame and are cantilevered in such a waythat it gives a multi-dimensional movementpossibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines mouldedin high strength glass-filled Poly-amide and the spine connector mouldedin glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature whichis inbuilt in seat base and the tension (return force) is user weight dependent.ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6+/-0.5cm. The Armrest Top is made up of integral skin PU moulded overplastic inner mouldedin glass-filled Poly-amide.PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 + 0.3 cm, PEDESTAL ASSEMBLY: The pedestal is injection mouldedin glass-filled Poly-amide and fitted with 5 nos. & fw wheel castors. The pedestal is 66.0£0.5 cm. pitch centre diameter and 76.0+1.0 cm. with castors, TWIN WHEEL CASTORS:5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0+/-0.1cm Overall Size-76W x 76D x 99.5-108.8H x 44.5-53.8 cm SH(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) Store 46 Steel Rack 6 Feet - Size (mm)- 1828 H x 914 W x 457 D General Room 47 Steel Table-made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 48 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 49 Storwel Plain with Four Shelves - Almirah of size 1981 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate and Product should have Green Guard by U/L Certified) Class Room Indoor Class Room 50 White Board- 6'x4' - Purpose of board- writing only. Magnetic White Board. Surface Material- Resin Coated Sheet Surface. Core Material- 9mm thick particle board.Almunium Frame- Anodized 5 microns extruded aluminium section designation 63400 as per IS:1285- 2002 - Width of Aluminium Frame = 16 mm thickness +- 3 mm tolerance. Surface suitable for writing with- Dry wipe Marker for White surface & non Dust Chalk for green surface. Erasibility- Best with Wet cloth / Felt / Sponge. White Board Stand Instructor Room 51 Storwel Plain with Four Shelves - Almirah of size 1981 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate and Product should have Green Guard by U/L Certified) 52 Steel Rack 6 Feet - Size (mm)- 1828 H x 914 W x 457 D Store Room 53 Storwel Plain with Four Shelves - Almirah of size 1981 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate and Product should have Green Guard by U/L Certified) 54 Steel Rack 6 Feet - Size (mm)- 1828 H x 914 W x 457 D 55 Steel Table -made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 56 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) Outdoor Class Room 57 White Board- 6'x4' - Purpose of board- writing only. Magnetic White Board. Surface Material- Resin Coated Sheet Surface. Core Material- 9mm thick particle board.Almunium Frame- Anodized 5 microns extruded aluminium section designation 63400 as per IS:1285- 2002 - Width of Aluminium Frame = 16 mm thickness +- 3 mm tolerance. Surface suitable for writing with- Dry wipe Marker for White surface & non Dust Chalk for green surface. Erasibility- Best with Wet cloth / Felt / Sponge. Stand 58 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 59 Steel Table-made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 60 Wooden Podium Multigym Gym 61 Steel Table -made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified) 62 Visitor Chair with Armrest- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA a) 6 Door PLU- Size- 375 W x 470 D x 1950 H . Construction & Material- Asthetically appealing completely knockdown. Leg fitted with screw type leveller. Made from combination of top panel (0.5 mm CRCA), side panel (0.5 mm CRCA), Back Panel (0.5 mm CRCA). Door without envelope slot- 6 Door Locker. Cam Lock- Oval knob that fuction as a handle.Click action mechanisam. Key lock in locked and unlocked position. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate and Product should have Green Guard by U/L Certified)
|
