Supplying Fixing & Installation Of Furniture & Necessary Items, All Complete Job At New Police Line In Araria in India

Work Detail

Supplying Fixing & Installation Of Furniture & Necessary Items, All Complete Job At New Police Line In Araria-1 King Bed with Hydraulic Storage of size - W x H x D: 1865 mm x 913 mm x 2055 mm With Mattress 78x 72x 4.Primary Material -Engineered Wood.Storage Mechanism -Half Hydraulic Storage. Delivery Condition -Knock Down.Headboard Included -Yes.Recommended Mattress Size -Depth : 198.1 cm (78"), Width : 182.9 (72"), Minimum Thickness : 10.2 cm (4").Primary Material Subtype -Prelaminated Particle Board. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 4 2 Dining Table of size - 750H x 900D x 1500W - Easy To Move The legs do not protrude, neither does it have a fragile tabletop, making the movement of the table an easy task. Just lift and move whenever you want.Sturdy Construct -With MDF used in the tabletop and solid wood legs, the strength of the table is a given. Put large vases along with your heavy dinner sets and it will bear the weight with grace. Material- Solid Wood. No. of Legs- 04.Table Shape- Rectangular((Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 2 3 "Dining Chair- Shape of the Cafeteria Chair Seat -Square Chair Armrest -Without Armrest. Material of Chair Seat- Rubber Wood. Seat with Cushion-Yes.Thickness of Cushion for Seat-20 millimeter.Density of Seat Cushion Kg/m^3-32.Upholstery Material of Seat-Leatherette.Material of Chair Back-Rubber Wood.Back with Cushion-Yes.Thickness of Cushion for Back-20 millimeter Density of Back Cushion Kg/m^3-32Upholstery Material of Back-Leatherette.Material of the Chair Under structure-Rubber Wood Height of Chair Seat from ground with a tolerance of ± 10 mm 400 millimeter.Overall Height of Chair from ground with a tolerance of ± 10 mm-933 millimeter.Warranty Period-1 year (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA and Product should have Green Guard by U/L Certified)" 12 4 Bed side table-Top material of bedside table -Three layer prelaminated particles board(Wood Product) of grade II Type II of IS 12823/Latest. Side,Back,Front and Bottom material of bedside table - Three Layer Prelaminated Particles Board(Wood Product) Of Grade II Type II Of IS 12823/Latest Drawer material - Commercial Board. Type of Bedside table- Abbey end type(with one drawer plus one shelves). Thickness of table top (±2mm except for glass) - 19 millimeter. Dimension of Bedside Table(LxBxH) ±5mm -457mmX457mmX432mm. Number of buffers to be provided -4 Numbers At The Bottom Warranty period in number of years - 1 (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 4 5 "Wardrobe of Dimensions W x H x D (cm) 139.9 x 193.8 x 58.9 (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA )" 4 6 Large Coffee Table of size: 450H X 600 D X 1200 W mm -Number of storage under top -Double storage (one at upper portion and one at bottom portion). Top material - Other wood. Frame material - Other wood. Dimension of Top (Length X Breadth, or Diameter) ±20mm - 1200mmX600mm Height of centre table ±10 mm -450 millimeter. Thickness of top material (+/-2 mm) - 18 millimeter. Thickness of frame material (+/- 1 mm) - 19 millimeter. Warranty period in number of years-1. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 4 7 Fabric High Back Chair -SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are- *HIGH BACK SIZE 52.0 cm. (W) x 83.0 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (THRILL CHAIR) : The adjustable armrest is designed with the following features : · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment. TUBULAR VISITOR FRAME ( Thrill Chair): The powder coated ( DFT 40-60 microns ) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube.PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black 33% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors)(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 8 8 Single Seater Sofa of size: 800W x 800D x 790H mm -Total Number of Seats in the Sofa Set - 1. Number of Single Seater Units (Nos) - 1. Frame Covering - Fully Upholstered. Sofa Set is Foldable to use as bed - No. Backrest Cushion Material - Foam. Density of Cushion of Backrest Material (Kg/Cubic M)- 32. Covering Material for Seat and Backrest- Leatherite. Frame Structure Material and size (±1 mm)- 18 mm thick Teak Plywood. Seat Cushion Material- Foam. Density of Cushion of Seat Material ±3 (Kg/Cubic M)- 35. Type of Spring in the Base / Seating - Web suspension. Length of Single Seater Units in mm (±5 mm) -800.Depth of Sofa Units in mm (±10 mm) 800.Sofa Height (Without Back Cushion) ±5 (mm)-430 millimeter. Sofa Height (With Back Cushion) ±5 mm- 790. millimeter.Seat Cushion Length ±5 (mm)-545.Seat Cushion Width ±5 (mm)-495.Seat Cushion Thickness ±3 (mm)-210 Backrest Cushion Length ±5 (mm)-800.Backrest Cushion Width ±5 (mm)-508.Warranty-1 - Year(Certificate- AIOTA, BIFMA, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015) 16 9 "Godrej Pillow of size ( 17""x27""x1). The pillow is filled with 670 grams of eco-friendly PET fiber, which is designed to provide even support and comfort. " 8 10 Godrej Mattress of size (78x72x5) Mattress has been specially made with a PU foam core for a good sleeping comfort.( 4 11 Three & One Seater Sofa of size: 1710W x 820D x 850H mm -Total Number of Seats in the Sofa Set -3. Frame Covering - Fully Upholstered. Sofa Set is Foldable to use as bed - No. Backrest Cushion Material - Foam. Density of Cushion of Backrest Material (Kg/Cubic M) - 32. Covering Material for Seat and Backrest - Leatherite. Frame Structure Material and size (±1 mm) - 18 mm thick Teak Plywood Seat Cushion Material- Foam. Density of Cushion of Seat Material ±3 (Kg/Cubic M)- 35. Type of Spring in the Base / Seating -Web suspension. Length of Three Seater Units in mm (±10 mm) -1750. Depth of Sofa Units in mm (±10 mm) -800. Sofa Height (Without Back Cushion) ±5 (mm) -430 millimeter. Sofa Height (With Back Cushion) ±5 mm -790 millimeter. Seat Cushion Length ±5 (mm) -640. Seat Cushion Width ±5 (mm)- 495. Seat Cushion Thickness ±3 (mm) -210. Backrest Cushion Length ±5 (mm) -1050. Backrest Cushion Width ±5 (mm)-508. Warranty -1 - Year(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 1 12 Large Coffee Table of size: 450H X 600 D X 1200 W mm -Number of storage under top -Double storage (one at upper portion and one at bottom portion). Top material - Other wood. Frame material - Other wood. Dimension of Top (Length X Breadth, or Diameter) ±20mm - 1200mmX600mm Height of centre table ±10 mm -450 millimeter. Thickness of top material (+/-2 mm) - 18 millimeter. Thickness of frame material (+/- 1 mm) - 19 millimeter. Warranty period in number of years-1.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 1 13 RECEPTION 8’ W L-SHAPED DESK OF SIZE- 2400W X 1770D X 740H: Reception Table of size 8' Liner of size 2400mm W x 1770mm D x 740mm H -Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories -Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. The product should be SCS Indoor Advantage Gold & Greenguard UL certified (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 1 For Administrative Building 1 RECEPTION 8’ W L-SHAPED DESK OF SIZE- 2400W X 1770D X 740H: Reception Table of size 8' Liner of size 2400mm W x 1770mm D x 740mm H -Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories -Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. The product should be SCS Indoor Advantage Gold & Greenguard UL certified (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 1 2 Fabric High Back Chair -SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are- *HIGH BACK SIZE 52.0 cm. (W) x 83.0 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (THRILL CHAIR) : The adjustable armrest is designed with the following features : · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment. TUBULAR VISITOR FRAME ( Thrill Chair): The powder coated ( DFT 40-60 microns ) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube.PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black 33% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors).(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 2 3 Godrej Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 10 For SP Office Reserve 1 10 Str PLT Unitized Conference Table of size-3000 X 1150 X 740 Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III.Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 1 2 Letherite High Back Chair : SEAT ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. BACK SIZE: 47.7 cm. (W) x 76.4 cm. (D) ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 1 3 Conference Mid Back Chair- SEAT ASSEMBLY : The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression, Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D), BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette, MID BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D), The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism is designed with the following features: 360' revolving type, Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position Tilt limiter giving option of variable tilt angle to the chair, The mechanism housing is made up of HPDC Aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm, ADJUSTABLE BACK SUPPORT : Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need high pressure die cast connector piece, Overall Size-76.1W x 76.1D x 96.5-114H x 43.1 -53.1 SH cm. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 9 3 Godrej Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 10 4 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 2 5 Three & One Seater Sofa of size: 1710W x 820D x 850H mm -Total Number of Seats in the Sofa Set -3. Frame Covering - Fully Upholstered. Sofa Set is Foldable to use as bed - No. Backrest Cushion Material - Foam. Density of Cushion of Backrest Material (Kg/Cubic M) - 32. Covering Material for Seat and Backrest - Leatherite. Frame Structure Material and size (±1 mm) - 18 mm thick Teak Plywood Seat Cushion Material- Foam. Density of Cushion of Seat Material ±3 (Kg/Cubic M)- 35. Type of Spring in the Base / Seating -Web suspension. Length of Three Seater Units in mm (±10 mm) -1750. Depth of Sofa Units in mm (±10 mm) -800. Sofa Height (Without Back Cushion) ±5 (mm) -430 millimeter. Sofa Height (With Back Cushion) ±5 mm -790 millimeter. Seat Cushion Length ±5 (mm) -640. Seat Cushion Width ±5 (mm)- 495. Seat Cushion Thickness ±3 (mm) -210. Backrest Cushion Length ±5 (mm) -1050. Backrest Cushion Width ±5 (mm)-508. Warranty -1 - Year(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 1 6 Large Coffee Table of size: 450H X 600 D X 1200 W mm -Number of storage under top -Double storage (one at upper portion and one at bottom portion). Top material - Other wood. Frame material - Other wood. Dimension of Top (Length X Breadth, or Diameter) ±20mm - 1200mmX600mm Height of centre table ±10 mm -450 millimeter. Thickness of top material (+/-2 mm) - 18 millimeter. Thickness of frame material (+/- 1 mm) - 19 millimeter. Warranty period in number of years-1. (Certificate- AIOTA, BIFMA, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015) 1 7 "Open Dustbin Plain (10x14) Volume- 11 Ltr. Material Thickness- 0.4mm Sheet " 1 For DY SP Reserve and Vice Principal office 1 Main desk of size 1800 x 900 x 740, ERU of size 1550 x 450 x 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING WITH 01 NO. 3 DRAWERS FREE STANDING PEDESTAL. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 2 2 Letherite High Back Chair : SEAT ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. BACK SIZE: 47.7 cm. (W) x 76.4 cm. (D) ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 2 3 Godrej Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA ) 12 4 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 4 5 "Open Dustbin Plain (10x14) Volume- 11 Ltr. Material Thickness- 0.4mm Sheet " 2 6 Notice Board- 4'x3' - Purpose of board- Display board. Surface Material- Woolen felt/ Fabric in various colours. Core Material - 9 mm thick soft board. Backing Material- Laminate sheet with extra melamine surface mix colour OR Galvanised steel sheet. 2 Reserve Staff Rooms (02) 1 "Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided . Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit. ( (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate )" 2 2 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 8 3 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 2 4 Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided . Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 2 5 Main desk of size 1200 x 600 x 740, made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 4 6 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. ( (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 8 7 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm Certificate- Green Guard by U/L, Griha, ISO 9001:2015 2 Service Book Section & HRMS DATA (Big Hall) 1 Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided .Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 2 2 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 4 3 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 12 4 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm Certificate- Green Guard by U/L, Griha, ISO 9001:2015 4 Library/Record Room 1 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 4 2 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 10 3 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 2 Seargent Major/ Insp. Office 1 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING.(Certificate- AIOTA, BIFMA, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015)(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 1 2 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 5 3 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 1 1st Floor Administrative Building 1 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 2 2 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 8 3 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 2 4 Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided . Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit. ((Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 1 Leave Section (Room no-2) 1 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. ((Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 2 Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided .Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 3 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 4 4 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 2 RSI-01 (Room no-03) 1 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 2 Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided . Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 3 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 6 4 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 2 RSI-02 (Room no-04) 1 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 2 "Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided . Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, )" 1 3 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 4 4 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 Kitchen Room 1 RECEPTION 8’ W L-SHAPED DESK OF SIZE- 2400W X 1770D X 740H: Reception Table of size 8' Liner of size 2400mm W x 1770mm D x 740mm H -Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories -Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. The product should be SCS Indoor Advantage Gold & Greenguard UL certified (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 2 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 2 Sanket Section (Room no.05) 1 Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided .Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm.Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit. .(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 2 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING..(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 3 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. .(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 4 4 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm .(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 Pension Section (Room no-06) 1 Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided . Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 2 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 3 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 4 4 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 Conference Hall 1 Conference Table-Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III, Length of Each Seat of Work Top ± 20 mm- 675 mm for single AND 1350 mm For dual,Depth of Work Top-600mm, Height of Work Top-750 mm, Corners of work top -850 mm, Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side. Godrej 2 Str Conference Table of size (1350 X 600 X 740) + Head 1800W of size (1800 X 850 X 740) for 40 person. Company should be ISO-9001, 14001, 18001, 45001, 50001, Greenguard, BIFMA and ALOTA certified Product should be Greenguard (UL) certified.(Certificate- Green Guard by U/L, AIOTA, BIFMA, ISO 9001:2015) 1 2 Letherite High Back Chair : SEAT ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. BACK SIZE: 47.7 cm. (W) x 76.4 cm. (D) ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 2 3 Conference Mid Back Chair- SEAT ASSEMBLY : The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression, Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D), BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette, MID BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D), The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism is designed with the following features: 360' revolving type, Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position Tilt limiter giving option of variable tilt angle to the chair, The mechanism housing is made up of HPDC Aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm, ADJUSTABLE BACK SUPPORT : Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need high pressure die cast connector piece, Overall Size-76.1W x 76.1D x 96.5-114H x 43.1 -53.1 SH cm. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 38 Dispatch Section (Room no-07) 1 Main desk of size 1200 x 600 x 740, made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 2 2 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 6 3 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 1 GP Section (Room no-08) 1 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 2 2 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 8 3 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 2 4 "Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided . Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, )" 1 Day Office 1 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 2 2 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 8 3 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 2 4 Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided . Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 1 Store Building 1 Steel rACK of size 6'x36"x18" with six shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986. The pitches of the slots at 19.05mm, Panels/Shelves : 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf , All fasteners of electro perk arised as per IS : 3655 -1985 Painting: All Steel components of powder coated as per IS: 101/1964. 5 2 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 2 3 Table of Dimenstion- 1665 X 900 X 740 made of Worktop- 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading, Understructure C – Frames 1.6 mm thick M.S CFrame Supporting the Top., Legs- Dia. 38.1 x 1.6 mm thick M.S ERW tube Company should be BIFMA, Green Guard by UL, AIOTA, GRIHA, India Design Mark, ISO-13485:2016, ISO-50001:2018, ISO-9001:2015, ISO-14001:2015, ISO-45001:2018 Certified 1 4 Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Certificate- AIOTA, BIFMA, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015) 2 Magazine Building 1 Study Table of size- Structure/ Frame of Table - Two Legs with modesty panel Footrest- Not provided . Table top material- prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates. Thickness of table top material- 19 mm. Gable end material - Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the gable end -19mm. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/ Latest. The thickness of the modesty panel material- 19mm. Leg Material. Width of tabletop-1200mm. Depth of table- 605mm. Height of table-718mm. Size (LxW)/ diameter of leg material- NA. Total Number of drawers/storage in Pedestal units- No Pedestal unit. ( Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 2 2 Main desk of size 1500 X 750 X 740, ERU of size 1050 X 450 X 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, 2 3 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, 8 4 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 4 300 Barrack (03 Unit) 1 Dining Table of size - 750H x 900D x 1500W - Easy To Move The legs do not protrude, neither does it have a fragile tabletop, making the movement of the table an easy task. Just lift and move whenever you want.Sturdy Construct -With MDF used in the tabletop and solid wood legs, the strength of the table is a given. Put large vases along with your heavy dinner sets and it will bear the weight with grace. Material- Solid Wood. No. of Legs- 04.Table Shape- Rectangular. (Certificate- AIOTA, BIFMA, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015) 15 2 "Dining Chair- Shape of the Cafeteria Chair Seat -Square Chair Armrest -Without Armrest. Material of Chair Seat- Rubber Wood. Seat with Cushion-Yes.Thickness of Cushion for Seat-20 millimeter.Density of Seat Cushion Kg/m^3-32.Upholstery Material of Seat-Leatherette.Material of Chair Back-Rubber Wood.Back with Cushion-Yes.Thickness of Cushion for Back-20 millimeter Density of Back Cushion Kg/m^3-32Upholstery Material of Back-Leatherette.Material of the Chair Under structure-Rubber Wood Height of Chair Seat from ground with a tolerance of ± 10 mm 400 millimeter.Overall Height of Chair from ground with a tolerance of ± 10 mm-933 millimeter.Warranty Period-1 year (Certificate- AIOTA, BIFMA, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015) " 108 Hospital Building 1 RECEPTION Table 5’ W L-SHAPED DESK OF SIZE- 1500W X 725D X 740H: Reception Table of size 5' Liner of size1500W X 725D X 740H -Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories -Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. The product should be SCS Indoor Advantage Gold & Greenguard UL certified (Certificate- Green Guard by U/L, AIOTA, BIFMA, ISO 9001:2015) 1 2 Mid Back Chair- The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and back is injection moulded from black Co-po)ymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: * BACK SIZE: 45.0cm(W) x 42.0cm.(D) 39.0cm(W) x 38.0cm.(H) SEAT / BACK COVERS: The seat and back covers are injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam is moulded with density_7=45 +/-2 kg/m3 and_Hardnessload_16..±..2_kgf as per_IS:7888_for 25% compression. ARMREST ASSEMBLY: The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. (Certificate- Green Guard by U/L, AIOTA, BIFMA, ISO 9001:2015) 2 3 Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Certificate- AIOTA, BIFMA, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015) 4 Doctor's Chamber (4 Rooms) 1 " Table of size 1200 x 600 x 728 Top made up of 18 mm thk prelaminated particles board (PLB). All work surface edges are duly sealed with 2 mm thick PVC Edgebanding Modesty Panel -18mm thk Prelaminated particle board (PLB). All work surface edges are duly sealed with 2 mm thick PVC Edgebanding, Rectangular Frame- Fabricated component in 1.2 mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester), Leg - Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder Coat (Epoxy polyester), Storage- Pedestal- Drawer Configuration/ Product size/ Styling-Box-Box-File : 3555.5(w) x 559(d) x 670(h), Construction & Material- Welded Assembled,Shell-0.6mm Thk. CRCA as per IS-513. Drawer Tray & back-0.5mm Thk.Finish Epoxy Polyster Powder Coated to the thickness of 50 microns (+-) Product should be Green Guard by UL Certified. (Certificate- Green Guard by U/L, AIOTA, BIFMA, ISO 9001:2015) " 4 2 Fabric High Back Chair -SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are- *HIGH BACK SIZE 52.0 cm. (W) x 83.0 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (THRILL CHAIR) : The adjustable armrest is designed with the following features : · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment. TUBULAR VISITOR FRAME ( Thrill Chair): The powder coated ( DFT 40-60 microns ) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube.PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black 33% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors).(Certificate- Green Guard by U/L, AIOTA, BIFMA, ISO 9001:2015) 16 3 "Godrej Table of size 1200 x 600 x 728 Top made up of 18 mm thk prelaminated particles board (PLB). All work surface edges are duly sealed with 2 mm thick PVC Edgebanding Modesty Panel -18mm thk Prelaminated particle board (PLB). All work surface edges are duly sealed with 2 mm thick PVC Edgebanding, Rectangular Frame- Fabricated component in 1.2 mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester), Leg - Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder Coat (Epoxy polyester), Storage- Pedestal- Drawer Configuration/ Product size/ Styling-Box-Box-File : 3555.5(w) x 559(d) x 670(h), Construction & Material- Welded Assembled,Shell-0.6mm Thk. CRCA as per IS-513. Drawer Tray & back-0.5mm Thk.Finish Epoxy Polyster Powder Coated to the thickness of 50 microns (+-) Product should be Green Guard by UL Certified. (Certificate- Green Guard by U/L, AIOTA, BIFMA, ISO 9001:2015) " 4 4 Fabric High Back Chair -SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are- *HIGH BACK SIZE 52.0 cm. (W) x 83.0 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (THRILL CHAIR) : The adjustable armrest is designed with the following features : · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment. TUBULAR VISITOR FRAME ( Thrill Chair): The powder coated ( DFT 40-60 microns ) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube.PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black 33% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors).(Certificate- Green Guard by U/L, AIOTA, BIFMA, ISO 9001:2015) 8 5 REVIVE EXAMINATION COUCH FULL STORAGE WITH STEP STOOL : Overall dimension 1975 mm (L) x 560 mm ( W) x 805 mm (H). Examination couch with three drawers with three cabinets, inbuilt step stool and BP tray holder.the base frame should made of 30 mm x 30 mmX 1.6 thick ERW tube. The cabinets should made of 1 mm thick CRCA sheet with recessed plastic handles and with lock and plastic door latch. the hindges of the cabinet should be made of sheet metal and pin arrangement. The internal dimension of the two side cabinets should be 422 mm (W) x 455 mm (D) x 540 mm (H). the internal dimension of the centarl cabinet should be 422 mm (W) x 455 mm (D) x 358 mm (H). The storage cabinet unit should be mount tubular base frame. The head rest should be adjustable on gas spring which should be actuated with C shaped handle lever . The drawers should made of 1 mm thick CRCA sheet with recessed plastic handles and work on double extension ball slides for smooth glide. the internal dimension of the drawer should be 330 mm (W) x 427 mm (D) x 92 mm (H) The mattress platform should be 65 mm thick which is made of 12 mm thick ply and PU foam and covered with leatherite cover.the cover should be water resistant, fire retuardant, aniti micraobial . the cover should have in-vitro cytotoxicity test report from reputed test lab. the end of the top mattress surface should be tapered end edge for ergonomic benifit. There should be ss304 made tissue roll holder present on the lower side of the back rest. There should be 1 mm thick CRCA made step stool with leveler with double extension ball slide for smooth operation. There should be 1 mm thick CRCA made BP aparatus holder which should be adjustable in height on a SS made height adjustable rod. Total load bearing capacity should be 135 kg. The examination couch should be provided with six numbers levelers made of metal & plastic for adjustment on the uneven floor. All the metal parts should be pre treated and powder coated with epoxy polyester powder coating. The examination couch should have CE certification from any notifying agency or its Indian counterpart, the manuafacturer shoudl have ISO 13485:2016 certfication from any notifying agency. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) 4 6 2 Drawers Filing Cabinet-2 Drawer:Width: 470mm, Height: 710mm, Depth: 620mm, Rigid KnockDown Construction, Material:- Top, Side & Drawer Frontmade from0.7mm thk **CRCA, Drawer- Inside Cover, Side Back Side made from0.6mmthk **CRCA, Back, Bottom, Drawer Bottommade from 0.5mmthk **CRCA, **CRCAsteel confirming to IS 513, Grade-D, Label Holder- Snap on type plastic label holder on Drawer Fronts, Locking & anti-tipping arrangement- Centralized lockingwith CamLock& having antitipping arrangement to ensure that when one ,drawer is opened for use, it does not allow other drawers to be opened, finish- Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). Company should be BIFMA, Green Guard by UL, AIOTA, GRIHA, India Design Mark, ISO-13485:2016, ISO-50001:2018, ISO-9001:2015, ISO-14001:2015, ISO-45001:2018 Certified 8 7 "Providing and Supplying EXAMINATION TABLE ON RATCHET MATTRESS 30 MM The bed should be provided with 40 density 30mm thick PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed. The mattress foam and cover to be divided in 2 sectionsThe manufacturer should compilant with ISO 9001, 14001, 13485 & OHSAS 1800 and CE certification.The work shall be carried as per the instructions of engineer in charge.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 )" 4 Examination Tble Mttress-RATCHET MATTRESS 30 MM 4 8 Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Certificate- AIOTA, BIFMA, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015) 8 9 "Semi Fowler Bed of size 2265L x 900W x 610H mm with 2 SECTION MATTRESS 100 MM : Ayush semi fowler bed is a single function bed, which has adjustable backrest and a fixed lower section. Dimension:(L)2268 mm X (W)922 mm X(H)610 mm. Higher diameter tube provides a sturdy understructure.snap locking handle lever with handle body keep it in folding position when not in use. Sheet metal lying surface of 1.0 mm thickness.Diagonal locking provides better stability to bed in the locked position.Provision of mounting of mosquito pole with 2 SECTION MATTRESS 100 MM (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 )" 12 10 Bed side table-overall dimensions should be 400W x 400 Dx 835mm H.The Locker should have one cabinet unit fitted with Cam lock. The legs are fitted with plastic leg bushes.The locker top should be of 0.8mm thick SS 304 Grade sheet . The SS sheet should be finished in buff-matt finish The top should have raised border of 10mm hieght on three sides.Cabinet should made 1 mm thick CRCA sheet . It should be fitted with hinge door and lock. The dooor should have louvers for ventilation. It should be provided with recess to serve as handle. Back of the locker should be provided with vertical spacer made of nylon.it should have uniformaly distributed total load bearing capacity of 20 kg.To ensure qood quality welding " Co2 Argon" process should be adhered to. All metal components should be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbial epoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. proof loading test , cycle tests , impact test, horizontal & vertical load tests for side rails, salt spray test, castor break test, pull test for head and foot board.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) 12 11 Saline Stand on Castors. SS Godrej Saline Stand is mounted on portable five pronged base with castors. It has a telescopic tube for height adjustment and has two hooks for saline.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) 12 12 3 Seater Chair - SEAT/BACK FRAME ASSEMBLY: The Seat and back are made of 0.12+- 0.0096 cm thick CR Steel perforated sheets which are welded to a seat/back frame assembly made of 1.9+- 0.02cm x 0.16 +_ 0.0128 cm thk MS ERW tube. Connecting Strips made of 0.5 +_ 0.05cm thk HR steel are welded to the structure for assembly with the connecting beam. The assembly is powder coated (DFT 40-60 microns). LEG ASSEMBLY: It is a 2-piece fabricated to form a box section made of 0.16+_ 0.0128 cm thk. CR steel. Threaded nuts are welded to the box section for fixing adjustable glide screws. The leg assembly is powder coated (DFT 40-60 microns). ADJUSTABLE GLIDE: The adjustable glide is injection moulded in black Nylon 6 and is used for level adjustment of the beam seating on uneven floor surface. It is fitted to the leg assembly. ARMREST: It is made up of oblong tube of size 0.35 +_0.024 cm x 0.15 +_0.015 cm x 0.16+_0.015 cm Thk & 0.015 cm Thk & 0.15+_ 0.02 cm bright bar welded to seat & back frame assembly. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 4 13 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 8 Pharmacy 1 Steel rACK System of size 6'x36"x18" with six shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986. The pitches of the slots at 19.05mm, Panels/Shelves : 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf , All fasteners of electro perk arised as per IS : 3655 -1985 Painting: All Steel components of powder coated as per IS: 101/1964. 2 2 Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, ) 2 3 "fOLDING wHEEL cHAIR- Over all dimension should be (L) 790 x (W) 600 x (H) 870mm Foldable frame structure should be made of section 22x1.2mm A3 carbon steel with chrome finish. Cross bar should be made of A3 carbon steel with section 25.4 x 1.2mm. The Rear wheel should be made of 24 inch Solid mag wheels with alloy in the rim . Integrated handrim shoud be provided to drive the wheel chair of section 16x1.2mm A3 carbon steel with chrome finish the front wheel should be of 8 inch HUB made of PA polymer and outer with solid rubber PU molded arm rest & base should be made of ABS for better arm support there should be Leatherite strap for calf rest & leatherite cushion for seat the foot rest should be Adjustable alluminimum die cast foot rest with updown & swivel type mechanism Push Handles should be made of moulded rubber grip to push the wheelchair Hand brakes should be provided to lock the wheelchair at desired location. Extended base with molded plastic for better grip it should be Anti rust chrome finsh safe working load should be 100kg. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 )" 4 4 Overall dimension should be 2005 mm (L) x 666 mm (W) x 827 mm (H). It should be removable stretcher on trolley mointed on castors.. The trolley should be made of 31.75 mm & 25.5 mm dia 1.2 mm thick & 1.6 mm thick ERW tube. The casters should be 200 mm dia diagonal lockable castors. te stretcher understructure should be made of 25.4 mm dia 1.6 mm thick ERW tube and the top should be made of 1.2 mm thick CRCA sheet. The stretcher should have provision to mount IV pole at four corners. The product should be pre treated and powder coated with Epoxy polyster powder coating. The maximum load bearing capacity should be 135 kg.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, CE Certificate from European notifying agency with 4 -digit registration number (as available on CE website), ISO-13485:2016 ) 4 Training School (04 Classrooms) Classrooms 1 Teacher's Table made of MS ERW round tube dia 25.4 x 1.2 mm thick with 18 mm thick Pre Laminated top size 900 x 590 x 750 with one drawer unit made of 0.5 mm thick CRCA sheet mild steel, all steel components have powder coated paint fitted with lock (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 4 2 Desklet Chair: Chair Type - the seat sub-assembly should be made up of 1.2±0.1cm thk plywood upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. the seat can tip-up when not in use and thshould be feature can be used while stacking the chairs horizontally the back sub-assembly should be made up of injection-moulded polypropylene inner upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. the contoured back with width extension at the bottom should be a should be designed to give comfort to lower back. the back flexing features allows the back to tilt by 9c±2' to aid the user in adopting a comfortable reclining posture. both these sub-assemblies should be fixed to the tubular structure, back size: 45.2cm (w) x 44.6cm (i-i) seat size: 47.0cm (w) x 50.0cm (d) tubular frame structure: the powder-coated 4 leg structure should be made of 2.2 ±0.03cm dia x 0.25 ±0.02cm thk m.s. e.r.w. tube front and rear leg welded along with connecting tube made of 1.9 ±-0.02cm dia x 0.2 ±0.016cm thk m.s. e.r.w. tube to form the tubular frame assembly. the legs should be provided with injection-moulded adopter bush in black nylon and brake-loaded castors enabling easy maneuvering while not in use and stable sitting while in use_ the chairs can be stacked horizontally when not in use_polyurethane foam: the polyurethane foam should be moulded with density = 70.0 ±8.0 kg/m3 and hardness = 20 ±2 for seat & 16 ±2 for back at 25% compression. armrests: the armrest structure should be made up of 2.2 ±0.03crn dia x 0.25 ±0.02cm thk m.s. e r.w. tube welded to the tubular frame structure and having a scratch-resistant tant abs arm top. (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 4 3 Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 450 4 sTUDENT Desk Cum Bench size shall be 1500 Width mm x 895 Depth mm x 750 Height mm . Top & Seat Panel shall be 18 mm thick PLB(pre - laminated board ) with Back panel shall be 18 mm thick PLT . The Understructure shall be MS SQ tubes of size 25.4 mm x 1.2 mm Plus there shall also be a storage Shelf . (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 225 Staff Room 1 Teacher's Table made of MS ERW round tube dia 25.4 x 1.2 mm thick with 18 mm thick Pre Laminated top size 900 x 590 x 750 with one drawer unit made of 0.5 mm thick CRCA sheet mild steel, all steel components have powder coated paint fitted with lock (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 8 2 Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 16 3 Almirah of size 1981(H) x 916(W) x 486(D) MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 2 Primary School (04 classrooms) 1 Teacher's Table made of MS ERW round tube dia 25.4 x 1.2 mm thick with 18 mm thick Pre Laminated top size 900 x 590 x 750 with one drawer unit made of 0.5 mm thick CRCA sheet mild steel, all steel components have powder coated paint fitted with lock (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 4 2 Desklet Chair: Chair Type - the seat sub-assembly should be made up of 1.2±0.1cm thk plywood upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. the seat can tip-up when not in use and thshould be feature can be used while stacking the chairs horizontally the back sub-assembly should be made up of injection-moulded polypropylene inner upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. the contoured back with width extension at the bottom should be a should be designed to give comfort to lower back. the back flexing features allows the back to tilt by 9c±2' to aid the user in adopting a comfortable reclining posture. both these sub-assemblies should be fixed to the tubular structure, back size: 45.2cm (w) x 44.6cm (i-i) seat size: 47.0cm (w) x 50.0cm (d) tubular frame structure: the powder-coated 4 leg structure should be made of 2.2 ±0.03cm dia x 0.25 ±0.02cm thk m.s. e.r.w. tube front and rear leg welded along with connecting tube made of 1.9 ±-0.02cm dia x 0.2 ±0.016cm thk m.s. e.r.w. tube to form the tubular frame assembly. the legs should be provided with injection-moulded adopter bush in black nylon and brake-loaded castors enabling easy maneuvering while not in use and stable sitting while in use_ the chairs can be stacked horizontally when not in use_polyurethane foam: the polyurethane foam should be moulded with density = 70.0 ±8.0 kg/m3 and hardness = 20 ±2 for seat & 16 ±2 for back at 25% compression. armrests: the armrest structure should be made up of 2.2 ±0.03crn dia x 0.25 ±0.02cm thk m.s. e r.w. tube welded to the tubular frame structure and having a scratch-resistant tant abs arm top.(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 4 3 Bench Desk Cum Bench size shall be 1500 Width mm x 895 Depth mm x 750 Height mm . Top & Seat Panel shall be 18 mm thick PLB(pre - laminated board ) with Back panel shall be 18 mm thick PLT . The Understructure shall be MS SQ tubes of size 25.4 mm x 1.2 mm Plus there shall also be a storage Shelf . (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 50 4 Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 100 Staff Room 1 1800 W size shall be 1800 Width mm x 900 Depth mm x 740 Height mm . The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top . The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube .(Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 4 2 Cantilever Chair Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm (Company Should have ISO 9001:2015, 50001:2018, 45001:2018, 14001:2015, AIOTA, IGBC PLATINUM, BIFMA, BIFMA LEVEL 2, GRIHA, BIS Certificate ) 8

Contact Information