|
Engine Oil 2 T 500 Ml, New/Recycled Motor Oil For Chainsaws, [Wide Competition Quota] - Plastic Canvas Roll: Rolls (Coils) Of Plastic Canvas, New From First Use, With Manufacturers Letter, In Black, Homogeneous Opaque, 120Kg Per Roll, With The Following Measurements: Width: 8M (Eight Meters); Length Per Coil: 100 M (One Hundred Meters), Uncut And Seamless; 4.1 Standardization The Technical Specifications Of Plastic Tarpaulin Rolls Must Be Observed In Order To Preserve The Quality Of The Materials. The Company That Will Participate In The Bidding Competition Must Present Technical Reports Namely: Tensile Strength And Impact Resistance Tests. The Test Results Must Correspond To The Minimum Values Listed Below: Thickness: At Least 200 (Two Hundred) Microns – Corresponding To At Least 0.20 Millimeters; The Tarpaulins Must Comply With The Technical Standards Of Astm D882, Astm D1709-09 And Astm E252-06, With The Minimum Values Corresponding To These Characteristics... (Full Specification Follows On Tr), [Me/Epp Reserved Quota] - Plastic Tarpaulin Roll: Rolls (Coils) Of Plastic Tarpaulin, Ribbon: Plastic Tarpaulin - 00:41:32, 12/18/2025 - 00:41:39, 12Mm Polyethylene Rope, 10Mm Traced Multifilament Rope, Chainsaw: Cooling: Air-Cooled; Cylinders: Single Cylinder; Engine Type: 2 Stroke; Starting System: Retractable Manual; Displacement: 72.2 Cc; Maximum Power: 4.8 Hp; Maximum Rotation: 13500 Rpm; Tank Capacity: 0.68 L; Chain Oil Capacity: 0.36 L; Bar Size And Type: 20 | Rolling Tip., File: 7/32, Chainsaw Helmet: Safety Helmet, Type I, With Front Flap, Class E (Electric), Polyethylene Shell With One Rib, Has Side Slits For Attaching Accessories: Hearing And Facial Protector, Suspension Composed Of Chamfer And Polyethylene Crown, With 4 Points For Attachment, Has Simple Adjustment With Button And Foam Sweat-Absorbing Strap. With Or Without Adjustable Collar, Made Of Synthetic Polystyrene Fabric Strip And Fixed To The Headband And/Or Separated With A Simple Or Velcro Closure, Noise Damper: Shell Type, 16Db, Attached To The Helmet Through A Slot. Foams. It Has A Half Shaft To Be Adapted To The Master I Safety Helmet, Mesh Face Visor, Leather Boot: Occupational Footwear, Boot Type, With Elastic Closure On The Sides, Made Of Black Chrome Tanned Leather, Tnt Mounting Insole – Resin Non-Woven Fabric In White, Sewn Using The Strobel Process, Internal Lining In Tnt Non-Woven Fabric In Gray, Sole In Bidensity Polyurethane In Gray Color, Injected Directly To The Upper, With Resistance To Fuel Oil And Energy Absorption In The Heel, Polypropylene Toe Cap., Occupational Boot: Occupational Footwear For Professional Use, Long-Tube Pvc Boot Type, Waterproof, Entire Polymeric, Made Of Polyvinyl Chloride (Pvc), With Chemical Resistance, Protection System Energy Absorption In The Sole, With Slip Resistance And Fuel Oil Resistance., Rio De Janeiro Type Glasses: Safety Glasses Consisting Of A Bow Made Of Black Thermoplastic With Central Pin And A Slit At Each End To Fit The Vision
|
