|
Duplex Aluminum Cable 1X10+10.00 Mm Main And Derivation Conductor In Low Voltage Networks, Without The Need To Strip The Wires. Operating Voltage Of 0.6/1 Kv, Compatible With Main Conductor Of 10 Mm², High Fusion Insulating Tape 23Lb 19Mm X 2M., Lamp. High Pressure Sodium Vapor 150 W, With Rated Power Of 150 W, Tubular Bulb And Rated Voltage Of 220 V, Minimum Luminous Flux Of 16,800 Lm, Average Life Of 32,000 Hours, Luminous Efficiency Of 107 Lm/W, E-40 Base, Procel Energy Efficiency Seal, In Compliance With A, 12/18/2025 - 09:00:50, Lamp. High Pressure Sodium Vapor 250 W, With Nominal Power Of 250 W, Minimum Luminous Flux Of 32,800 Lm, Luminous Efficiency Of 115 Lm/W, Lamp. T8 65W Tubular Led (White Light), With G13 Base, Non-Dimmable, Automatic Bivolt (100240V / 60Hz), White Light With Color Temperature Of 6500K, Minimum Lifespan Of 25,000 Hours And Luminous Efficiency Of 100 Lm/W. It Has A Luminous Flux Of 6,500 Lumens, Approximate Dimensions Of 28 Mm, Led Luminaire Embedded In The Ground, With A Maximum Nominal Power Of 20 W, Nominal Voltage Of 100240 V, Minimum Luminous Flux Of 1,750 Lm, Minimum Luminous Efficiency Of 85 Lm/W, Power Factor Greater Than 0.90, Maximum Harmonic Distortion Rate (Thd) Of 20%, Color Temperature Of 2,700 K, Fa, Blind Plug-In Module, In Pvc, In Plain White. Must Be Compatible With Plate + Support Set. Compatible With The Pezzi Brand, 50,000 Line, 100 W Led Reflector, For External Use, With Nominal Power Of 100 W, Minimum Luminous Flux Of 10,000 Lm, Minimum Luminous Efficiency Of 100 Lm/W, Color Temperature Of 6,000 K, Color Rendering Index (Irc) Greater Than 80%, Opening Angle Greater Than 100°, Minimum Degree Of Protection Ip, Photoelectric Relay With Nominal Power Of 1000 W/1800 Va, Operating Voltage Between 100 And 305 Vac, 50/60Hz, Switching Capacity Equal To Or Greater Than 10 A For Resistive Load And 5 A For Inductive Load, With Inrush Capacity Of Minimum Peak Of 60 A/1 Ms (Or Equivalent Test), Suitable For A, Twist Connector Terminal 2X2, 5 Mm² Orange Color, Twist-On Type, Intended For Splicing And Insulating Two Copper Conductors, Rigid Or Flexible, For Low Voltage Use In Accordance With Abnt Nbr 5410. The Product Must Meet Abnt Nbr Iec Standards 60998-1 (General Requirements) E Abnt Nbr Iec 609, Double Bar Socket 2P + T 20A Model Tmu2-320.
|
