Bids Are Invited For Hiring A Specialized Legal Entity To Supply School Furniture, Intended To Meet The Need ... in Brazil

Work Detail

Student Set Cja06b Individual Student Set Consisting Of 1 (One) Table And 1 (One) Chair, Certified By Inmetro In Compliance With Abnt Nbr 14006 Standard - School Furniture - Chairs And Tables For Individual Student Set. Individual Table With Injected Plastic Top With Melamine Delaminated Application On The Top Surface, Equipped With A Structural Crosspiece Injected In Technical Plastic, Mounted On A Tubular Steel Structure, Containing Book Holders In Injected Plastic. Finished Dimensions Of 608Mm (Width) X 466Mm (Depth) X 22Mm (Height), Allowing Tolerance Of Up To /- 3Mm For Width And Depth And /- 1Mm For Height. Individual Stackable Chair With Seat And Back In Injected Polypropylene Or Molded Anatomical Plywood, Mounted On A Tubular Steel Structure., Student Set Cja04b Individual Student Set Composed Of 1 (One) Table And 1 (One) Chair, Certified By Inmetro, In Compliance With Abnt Nbr 14006 - School Furniture - Chairs And Tables For Student Sets Individual. Individual Table With Injected Plastic Top With Melamine Delaminated Application On The Top, Containing Injected Plastic Book Holders. Stackable Individual Chair With Seat And Back In Injected Polypropylene, Mounted On A Tubular Steel Structure. Finished Dimensions Of 608Mm (Width) X 466Mm (Depth) Design, Detailing And Finishing According To Project. Dimensions, Design And Finish As Per Project., Childrens Pre-School Set (1) Table And (4) Chairs: Table Injected In Abs Thermoplastic, Measuring Approximately 800Mmx800mmx550mm, Rounded Corners, Minimum Thickness 5Mm. Fixation Using Built-In Metal Bushing For Better Resistance And Impact. Damesa Top Base Formed By 04 Square Tubes Of Approximately 30Mmx30mm And 1 Tube In The Central Part Approximately 25Mmx25mm Minimum Thickness Of 1.2Mm. Feet Base Formed By 4 1/5 Inch Round Tubes, Minimum Thickness 1.2Mm. Non-Slip Shoes Partially Enclosing The Ends Of The Tubes That Make Up The Feet, Performing The Function Of Paint Protection, Increasing Durability, Comply With The Straight Shape Of The Feet. Approximate Height Of Chair Seat To Floor 34.0Cm. Chair With Seat And Back In Virgin Plastic Resin, Manufactured Using The Thermoplastic Injection Process. Seat Measuring Approximately 300Mmx300mm. Backrest With Anatomical Curvature Measuring Approximately 300X160mm, Thickness Of Approximately 5Mm, Fixed Using Rivets For Better Resistance To The Seat, Backrest. Structure Formed By 20Mmx20mm Tubes For Interconnection Between The Backrest And The Seat. Two Pairs Of 20X50mm Tubes For Interconnection Between The Seat And The Base Of The Feet, Minimum Thickness Of 1.2Mm That Make Up The Base Of The Seat And Feet. Feet Base Formed By 30Mmx50mm Tubes, Thickness Of 1.2Mm. The Entire Metallic Structure Is Manufactured From Industrial Steel Tubes Treated By Sets Of Chemical Baths For The Protection And Longevity Of The Structure, Interconnected By Welding And Painted Using The Epoxy Powder System. Structure Color: Standard Unit Rope., Academic Or University Chair - School Chair With Right-Handed Or Left-Handed Side Clipboard In Abs Thermoplastic Resin, Capable Of Holding A Sheet Of A4 Paper In Horizontal/Vertical Position, Being Attached To The Chair And Fixed Using 05 Invisible Self-Tapping Screws, Equipped With A Pencil Holder In Vertical Position With Arm Capacity

Contact Information