Tender For Special Repair For Provision Of New Wooden And Steel Furniture Items For Recoup The Deficiency Of ... in India

Work Detail

Tender For Special Repair For provision Of New Wooden And Steel Furniture Items For Recoup The Deficiency Of Wooden And Steel Furniture Items Against Ber/Survey Of Under Ge (A) Jamnagar-2 BIN LINEN MULTIPURPOSE (FD/E6/MAP/09)Bin Linen Multipurpose of overall size 1025mmX750mmX450mm made out of 19 mm thick prelaminated particle board/18mm MDF board of cark walnut shade in high gloss finished (at side top and shelves) with 4 mm thick Teak wood edging all around as per drg contractor to check and verify all dimensions before execution of the work. All joints/fixing shall be done in accordance with the standard workmanship and specification as mentioned in drg. All wood work and teak veneered surfaces shall be french polished exept where is inticated on drawing. Timber shall be seasioned teak wood GDE-1 unless otherwise specified. Rest all as per drg. 3 BOARD NOTICE 3"X2" (FD-117M)Board Notice of size (900X600mm) Green Blazer clothfixed on 12 mm thick soft board shall be provided with 6mm thick glass shutter inlcuing all Joints/fixing shall be done in accordance with the standard workmanship and specifications as mentioned in drg.Contractor tocheck and verify all dimensions before execution of the work. All sizes given for wood work are finished sizes. All wood work and teak veneered surfaces shall be french polished exept where is required as mentioned in drg. Rest all as per drg. 4 SOFA SET FIVE SEATER (FD/MAP-II/02)Sofa Set Five Seater consisting of one large piece of three seat of 1730mm X 725mm and two small pieces of size 760mm X725mm with cushion 100mmthick of size 520X560mm shall be covered with tapestry cloth colour/quality shall be decided by Engr-in-Charge as per drg. Contractor to check and verify all dimensions before execution of the work. All joints/ fixing shall be done in accordance with the standard workmanship and specifications as mentioned in drg. All wood work and teak veneered surfaces shall be french polished exept where is inticated on drawing. Timber shall be seasioned teak wood GDE-1 unless otherwise specified. Rest all as per drg. 5 SOFA CHAIR SINGLE SEATER (FD-113)Sofa chair single seater overall size 760mm X 725mm with cushion 100mm thick of size 520X560mm shall be covered with tapestry cloth colour/quality shall be decided by Engr-in-Charge as per drg.Contractor to check and verify all dimensions before execution of the work. All joints/fixing shall be done in accordance with the standard workmanship and specifications as mentioned in drg. All wood work and teak veneered surfaces shall be french polished exept where is inticated on drawing. Timber shall be seasioned teak wood GDE-1 unless otherwise spicifieded.. Rest all as per drg. 6 RACK SIDE 4 SPACES (FD-1023)Side rack table with four tray oveall of size 920mmX1120mmX355mm Contractor to check and verify all dimensions before execution of the work. All joints/fixing shall be done in accordance with the standard workmanship and specifications as mentioned in drg. Rest all as per drg. 7 TABLE WRITING MED (FD-275) Table writing Med 1145X600X760mm table top 19mm thick particle board with phenol formaldehyde exterior grade BWP type with 1.5 mm thick decorative laminate fixed on one side with 4mm thick teak wood edging should be provided as per drg. Drawer sgolud be provided as per dimensions mentioned in drawing. All joints/fitting/fixing shall be done in accordance with the standard workmanship and specifications.COntractor to check and verify all dimensions before execution of the work. All sizes given for wood work are finished sizes. All wood work and teak veneered surfaces shall be french polished of Dark walnut shade with high gloss where is inticated on drawing. Timber shall be seasioned teak wood GDE-1 unless otherwise specified.Rest all as per drg. 8 TABLE DINING 8 PERS (FD/MAP-II/03)Table Dinning 8 pers of size 1800x900x760mm with table top 19mm thick particle board with phenolformaldehyde externalgrade BWP with 1.5mm thick decorative laminated fixed on one side with teakwood edging should be provided as per drg.All joints/fixing shall be done inaccordance with the standard workmanship and specifications Contractor to check and verify all dimensions before execution of the work. All sizes given for wood work are finished sizes. All wood work and teak veneered surfaces shall be french polished exept where is inticated on drawing. Timber shall be seasioned teak wood GDE-1 unless otherwise specified Rest all as per drg. 9 TABLE DINING FOR 6 PERS (FD/MAP-II/03)Table Dinning 6 pers of size 1500x900x760mm with table top 19mm thick particle board with phenol formaldehyde externalgrade BWP with 1.5mm thick decorative laminated fixed on one side with teakwood edging should be provided as per drg. All joints/fixing shall be done inaccordance with the standard workmanship and specifications Contractor to check and verify all dimensions before execution of the work. All sizes given for wood work are finished sizes. All wood work and teak veneered surfaces shall be french polished exept where is inticated on drawing .Timber shall be seasioned teak wood GDE-1 unless otherwise specified Rest all as per drg . 10 TABLE DINING FOR 4 PERS (FD/MAP-II/03)Table Dinning 4 pers of size 900x900x760mm with table top 19mm thick particle board with phenol formaldehyde externalgrade BWP with 1.5mm thick decorative laminated fixed on one side with teakwood edging should be provided as per drg. All joints/fixing shall be done inaccordance with the standard workmanship and specifications Contractor to check and verify all dimensions before execution of the work. All sizes given for wood work are finished sizes. All wood work and teak veneered surfaces shall be french polished exept where is inticated on drawing .Timber shall be seasioned teak wood GDE-1 unless otherwise specified Rest all as per drg . 11 SCH "A" PART-II (STEEL FURNITURE) 12 BOOK SHELF OPEN LARGE STEEL (FD-1028)Book Case Steel with glass shutter overall size 1675x310x840mm made of 1mm thick MS with 1.25mmx15mm MS flat for frame work 3mm thick glass panes provided for sliding shutter.Each sliding shutter shall be provided with inside lock and two handles to open shutter shall be lifted and slide Horizentally as shown in drg.Contractor to check and verify all dimensions before execution of the work. All joints/welding/fixing shall be done inaccordance with the standard workmanship and specifications as mentioned in drg. All welded construction and steel work shall be painted internally & externally with olive green or silver gray or as required shade by Engr-in-Charge over a coat of primer. Rest all as per drg. 13 BLACK BOARD WITH EASEL(FD-1041)Black board of size 1200mmx900mm made out of 15mm thick Fibre board with alluminium channel as mentioned in drg. Easel of size 1820mmx1525mm made out of 32x25mmand 1.5mm thick Rectangular tube. Pointer Medium of size 1525mm made out of stainless steel clip shall be provided as mentioned in drg.Contractor to check and verify all dimensions before execution of the work. All joints/welding/fixing shall be done inaccordance with the standard workmanship and specifications as mentioned in drg. All welded construction and steel work shall be painted internally & externally with olive green or silver gray or as required shade by Engr-in-Charge over a coat of primer .Rest all as per drg. 14 BED HARD STEEL (FD/E6/MAP/08 (R)) Bed Hard steel with plywood top Map Overall size of bed 2050X 900X800mm (Head Side) X 500mm (Foot Side) with frame work of 38mmX38mm MS Square pipe of 18 Gauge. 12mm thick BWR phend Bonded Commercial Plywood with edging (Unpolished) placed on top of 25mmX25mm support as mentioned in drg. 18mm thick prelaminated particle board fixed with screwed to MS Strip ARC welded to 18 mm thick rectangular pipe provided both side i.e. Head side and foot side as per size mentioned in drg. Contractor to check and verify all dimensions before execution of the work. All joints/welding /fixing shall be done in accordance with the strandard workmanship and specifications. All welded construction and steel work shall be painted internally & externally over a coat of primer . Rest all as per drg. 15 CHAIR CBA STEEL WITH ARMS (FD-75(M))Chair CBA Steel with Arms overall size 555mmx560mmx900mm seat 455mm high from floor. Plastic Cane seat and Back continious Arms Rest with teak cover in black polish . Frame work of steel trusses in stove enamelled finish to the reqd shade. Plastic caning on seat and back should be og Godrej PatternContractor to check and verify all dimensions before execution of the work. All joints/fixing shall be done inaccordance with the standard workmanship and specifications as mentioned in drg. . Timber shall be seasioned teak wood GDE-1 unless otherwise specified. Rest all as per drg. 16 CHAIR CBA STEEL WITHOUT ARMS(FD-75(M))Chair Steelwithout Arms Chair overall size 555mmx560mmx900mm seat 455mm high from floor. Plastic Cane seat and Back continious . Frame work of steel trusses in stove enamelled finish to the reqd shade. Plastic caning on seat and back should be og Godrej PatternContractor to check and verify all dimensions before execution of the work. All joints/fixing shall be done inaccordance with the standard workmanship and specifications as mentioned in drg. . Timber shall be seasioned teak wood GDE-1 unless otherwise specified Rest all as per drg 17 LOCKER BED SIDE STEEL (FD-1029)Locker Bed side Steelof size 1100mmx760mmmade of 1mm thick black steelsheet.Chromium plated steelhandle 100mm long andsafety type Hasp and staple chromo plated 75x40x3mmfixed to steel shutter . Contractor to check and verify all dimensions before execution of the work. All joints/welding/fixing shall be done inaccordance with the standard workmanship and specifications as mentioned in drg. All welded construction and steel work shall be painted internally & externally with olive green or silver gray or as required shade by Engr-in-Charge over a coat of primer.Rest all as per drg. 18 RACK STATIONER STEEL (FD-81(M) Rack Stationery steel of size and specification shall be as per drawing. Contractor to check and verify all dimensions before execution of the work. All joints/welding/fixing shall be done inaccordance with the standard workmanship and specifications. All welded construction and steel work shall be painted internally & externally with silver gray or as required shade by Engr-in-Charge over a coat of primer. 19 RACK STEEL ADJUSTABLE 6 TIER (FD-1038)DIMENSION: Overall size 915x910x1905as per FD drawing.DESCRIPTION: Three side covered 1.0mm thick mild steel sheet. Shelve with enclosed back and sides fitted with Six shelves (including top and bottom adjustable making six compartments). All sheet shall be mild steel sheet 1 mm thick, back,sides, bottom, top and shelves. The rack shall be provided with Six compartments of equal size. All corner 75mm x 75mm x 3mm th F. I. cut to shape & welded.FINISH: The Racks shall be dry powder coated in double shade (shutter in off white and outer frame in steel grey after preparation of surface . Rest all as per drg. 20 STOOL STEEL2" HEIGHT (FD-81(M))Stoolsteel 2" height of overall size of 305x305x600mm made of angular frame with plain top sheet . Contractor to check and verify all dimensions before execution of the work. All joints/welding/fixing shall be done inaccordance with the standard workmanship and specifications as mentioned in drg. All welded construction and steel work shall be painted internally & externally with olive green or silver gray or as required shade by Engr-in-Charge over a coat of primer.Rest all as per drg 21 STOOL STEEL (FD-81(M))Stoolsteel of overall size of 305x305x710mm made of angular frame with plain top sheet . Contractor to check and verify all dimensions before execution of the work. All joints/welding/fixing shall be done inaccordance with the standard workmanship and specifications as mentioned in drg. All welded construction and steel work shall be painted internally & externally with olive green or silver gray or as required shade by Engr-in-Charge over a coat of primer.Rest all as per drg 22 TRASTLE STORE ROOM STEEL (FD-1043)Trestle store room steel of overall size 2440x300x600mm.All steel work/ joints/welding/fixing shall be done inaccordance with the standard workmanship, specifications and sizeas mentioned in drg.Contractor check and verify all dimensions before execution of the work.All welded construction and steel work shall be painted internally & externally withsilver gray or as required shade by Engr-in-Charge over a coat of primer. Rest all as per drg 23 SCH "A" PART-III (TP ITEMS) 24 BAR STOOL 3" HEIGHT WITH CUSHIONBar stool 3" height with cushion modern radiance NXT swivel bar chair-beige. Dimensions, 2 cm X 46 cm X 110 cm. Material- Uholstery material, fabric, primary material- metal , general specification:Type-Bar Chairs, Adjustable Height-Yes, Colour-Beige, Upholstered seating-Yes.Assembly-Assembly Required-Yes, Assembly Type- Assembly Service Provided by Retailer. 25 DRUGGET (DURRIE) 15"X12"Drugget (Durrie)15"X12" Cotton Floor Mat,(Pack of 1) Dari, Satranji, Dhurrie, Rugs,Size 12 Ft X 15 Ft colour red and blue weave type flat woven. Rest all as per drg. 26 TABLE CONFERENCE OF SIZETable Conference of size theodor U shapedConference table in dark walnut (10 seater) alongwith following specifications: Model EOCT21003, NameTheodor U shaped conference table in Dark Walnut (10 seater) Product Dimension 4200mm (L) 2100mm (W) 750mm (H), Number of seats 10, Primary material Pre lam Particle board, secondary Material Metal Leg, B Colour/shade Dark Walnut, Top Thickness 25mm Gable End/Leg thickness metal I- Leg,Modesty thickness 0.8mm thick sheet (powder coated), Need Assembly at site-Yes.

Contact Information