Tender For Supply Of Furniture For Office And Hall Of Fish Mandi N.M.Y Chandauli in India

Work Detail

Tender For supply of Furniture For Office And Hall Of Fish Mandi N.M.Y Chandauli , Executive Table Supplying & Placing Executive Table As Per Image; 1800X2100x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. As Per Approved Sample And Direction Of Engineer In Charge. , Executive Back Runner Supplying & Placing Back Side Credenza Unit As Per Image 1800X500x1800 Top Panel-Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Slide Door Unit-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping For Body Panels Like Side, Bottom,Back And Shelves. Shutters Are Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening.Storage Is Provided With Lock For Security. Display/Storage Unit-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping For Body Panels Like Side,Back And Shelves.Doors Are Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Top Panel Of Display Unit Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. As Per Approved Sample And Direction Of Engineer In Charge. , Executive High Back Providing And Placing High Back Chair With Overall Size Of 76.1 Cm W X 76.1 Cm D X 112.7 - 130.2 Cm H X 43.1 - 53.1 Cm Seat Height. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Armrest Top Is Molded From Polyurethane And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of Ø3.81±0.03Cm X 0.2±0.01Cm Thick M.S. Erw Tube Having Chrome Plated Finish. The Armrest Is Height Adjustable Up To 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Is Designed With Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair, Seat/Back Tilt Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5Cm. Back Frame Is Connected To The Up/Down Mechanism In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Comfort The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium & Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 65.0±0.5Cm Pitch Centre Dia. (75.0±1.0Cm With Castors). 5 Nos. Of Twin Wheel Castors Are Injection Molded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. , Executive Visitor Providing And Placing Visitors Chair With Overall Size Of 60.9 W M X 64.2 D Cm X 98.2 H Cm X 44.8 Seat Height Cm. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Tubular Frame Is Cantilever Type And Made Of Ø2.54±0.03Cm X 0.2±0.016 Cm Thick Ss 202 Tube. The Back Connected To Frame Through Chrome Plated High Pressure Die Casted Connector Pipe. , Seater Sofa 2 Seater-134Cm(W)*87Cm(D)*78Cm(H)*43Cm(Sh). Stitching: Thread : Poly Proplin. Leather/Pvc/Fabric: Pvc. Thickness (Mm) : 0.9. Weight (Gsm) : 575. Frame Material (Tropical Wood / Pine Wood/ Rubber Wood): Moisture Content ( 10 - 12 %) : 16-20%. Thickness Of Plywood Used(Mm) : 12Mm & 18Mm. Seat Foam: (Density, Type)-Thickness (Mm) : 69, 22 & 10 Mm. Density (Kg/M3)- 32D. Type Of Foam (Virgin/Composite/Moulded/ Slabstock) : Vergin Always / In Some Case Moulded - Dencity :- 48D. Leg Material: * Fixing Of Leg : (Self Tapping Screw / Insert With Metric Threading) :- Woodscrew Provided On Frame In Addition To M-8 / T-Nut * Material Of Leg : (Plastic / Insert Moulding / Wooden/ Ms / Ss) :- Plastic * Bush For Leg Bottom : (Pvc Bush / Felt Pad) :- Pvc. Bush .Back Foam: (Density, Type) -Thickness (Mm) : 45 Mm .Density (Kg/M3): 28 D .Armrest Foam: (Density, Type) Thickness (Mm) : 45 Mm .Density (Kg/M3): 26 D , Sofa Seater 1 Seater-92Cm(W)*87Cm(D)*78Cm(H)*43Cm(Sh). Stitching: Thread : Poly Proplin. Leather/Pvc/Fabric: Pvc. Thickness (Mm) : 0.9. Weight (Gsm) : 575. Frame Material (Tropical Wood / Pine Wood/ Rubber Wood): Moisture Content ( 10 - 12 %) : 16-20%. Thickness Of Plywood Used(Mm) : 12Mm & 18Mm. Seat Foam: (Density, Type)-Thickness (Mm) : 69, 22 & 10 Mm. Density (Kg/M3)- 32D. Type Of Foam (Virgin/Composite/Moulded/ Slabstock) : Vergin Always / In Some Case Moulded - Dencity :- 48D. Leg Material: * Fixing Of Leg : (Self Tapping Screw / Insert With Metric Threading) :- Woodscrew Provided On Frame In Addition To M-8 / T-Nut * Material Of Leg : (Plastic / Insert Moulding / Wooden/ Ms / Ss) :- Plastic * Bush For Leg Bottom : (Pvc Bush / Felt Pad) :- Pvc. Bush .Back Foam: (Density, Type) -Thickness (Mm) : 45 Mm .Density (Kg/M3): 28 D .Armrest Foam: (Density, Type) Thickness (Mm) : 45 Mm .Density (Kg/M3): 26 D , Coffee Table Dimantions-600Mm(W)*1000Mm(L)*428Mm(H)**8Mm(Glass Thk).Material=Glass Of 08Mm Thk Tempered,Solid Rubber Wood Legs & Frame ,Ms Sheet As Bottom Shaf . Decoration Materials- Pu Coateing To Rubber Wood Parts Clear Glass. , Corner Table Dimantions(+/-5Mm)-500Mm(W)*500Mm(L)*428Mm(H)*8 Glass Thk.Material-Glass Of 8Mm Thk Tempered,Solid Rubber Wood Legs & Frame ,Ms Sheet As Bottom Shelf. , Ante Room Recliner Total Length830;Total Height1000; Total Width740 Stitching: Thread :Nylon 40 Tktpitch: Gap 2 Mm From Border + Pitch 6 Per Inch. Leather/Pvc/Pu/Fabric:Full Pu Leatherette. Frame Material (Tropical Wood / Pine Wood/ Rubber Wood):Rubberwood Moisture Content :12 - 14 % Seat Foam: (Density, Type) :24 Density Foam + Pocket Spring (49 Nos. Of Dia 50 Mm / Seat) Spring Rod Dia =1.6 Mm+ 24 Density Foam. Back Foam: (Density, Type) :24 Density Foam + Polyester Fabric (Recron). Armrest Foam: (Density, Type) :24 Density Foam Belt/ Webbing Material:Na Spring Details ( S-Spring / Pocket Spring):3.5 Mm Thick S Spring Leg Material:Msl Angle + Leveling Bush. , Sofa 3 Seater 3 Seater-175Cm(W)*87Cm(D)*78Cm(H)*43Cm(Sh). Stitching: Thread : Poly Proplin. Leather/Pvc/Fabric: Pvc. Thickness (Mm) : 0.9. Weight (Gsm) : 575. Frame Material (Tropical Wood / Pine Wood/ Rubber Wood): Moisture Content ( 10 - 12 %) : 16-20%. Thickness Of Plywood Used(Mm) : 12Mm & 18Mm. Seat Foam: (Density, Type)-Thickness (Mm) : 69, 22 & 10 Mm. Density (Kg/M3)- 32D. Type Of Foam (Virgin/Composite/Moulded/ Slabstock) : Vergin Always / In Some Case Moulded - Dencity :- 48D. Leg Material: * Fixing Of Leg : (Self Tapping Screw / Insert With Metric Threading) :- Woodscrew Provided On Frame In Addition To M-8 / T-Nut * Material Of Leg : (Plastic / Insert Moulding / Wooden/ Ms / Ss) :- Plastic * Bush For Leg Bottom : (Pvc Bush / Felt Pad) :- Pvc. Bush .Back Foam: (Density, Type) -Thickness (Mm) : 45 Mm .Density (Kg/M3): 28 D .Armrest Foam: (Density, Type) Thickness (Mm) : 45 Mm .Density (Kg/M3): 26 D , Coffeetable Supplying & Placing Centre Table As Per Image. Overall Size :Width : 110Cm Depth : 60Cm Height : 50Cmtable Legs Meterials & Size : Oval Metal Tube ,Thick 1.5 Mm , Color : Silver Power Coating . Table Top Materials & Size : (Density / Type):L X W X T:1100 X 600 X 8 Mm , Color : Partial Black Temered Glass Top Full Black Tempered Glass . Table Bottom Materials & Size : (Density / Type) : L X W X T:1100 X 600 X 6 Mm , Color :Full Black Tempered Glass. As Per Approved Sample And Direction Of Engineer In Charge. , Work Table1650 X 1950 Providingin Place Of Main Table With Overall Size Of Table 1650 X 1950 X 750Mm. The Main Table Shall Be Of Size 1650 X 750 X 750Mm. The Side Unit Shall Be 1200 X 500 X 750Mm. The Table Is Made Of 25 Mm Thick Mdf - One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Eru Top Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Modesty Panel Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. The Pedestal Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board With 0.4 Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. , Officer Back Unit 1650 X 500 X 750 The Back Unit Shall Be Of Dimensions 1650 X 500 X 750Mm. It Shall Be Made Of 25Mm Thick Mdf - One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. The Slide Door Unit Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Storage Is Provided With Lock For Security. , Officer High Back Providing And Placing High Back Chair With Overall Size Of 76.1 Cm W X 76.1 Cm D X 112.7 - 130.2 Cm H X 43.1 - 53.1 Cm Seat Height. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Armrest Top Is Molded From Polyurethane And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of Ø3.81±0.03Cm X 0.2±0.01Cm Thick M.S. Erw Tube Having Chrome Plated Finish. The Armrest Is Height Adjustable Up To 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Is Designed With Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair, Seat/Back Tilt Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5Cm. Back Frame Is Connected To The Up/Down Mechanism In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Comfort The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium & Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 65.0±0.5Cm Pitch Centre Dia. (75.0±1.0Cm With Castors). 5 Nos. Of Twin Wheel Castors Are Injection Molded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. , Officer Visitor Providing And Placing Visitors Chair With Overall Size Of 60.9 W M X 64.2 D Cm X 98.2 H Cm X 44.8 Seat Height Cm. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Tubular Frame Is Cantilever Type And Made Of Ø2.54±0.03Cm X 0.2±0.016 Cm Thick Ss 202 Tube. The Back Connected To Frame Through Chrome Plated High Pressure Die Casted Connector Pipe. , Hod Main Desk Supplying And Placing In Position Main Desk Of The Following Specifications. The Main Table Shall Be Of Size 3600 Width Mm X 1080 Mm Depth X 750 Mm Height. Top Surface Of The Table Shall Made Up Of Mdf (Medium Density Fibre ) Board Duly Finished With Veneer And Final Coating Of Pu. The Main Desk Should Contain In Smart Case - Space Slides Effortlessly In Style.The Mobile Pedestal Shall Be Of Size 480 Width Mm X 640 Depth Mm X 600 Height Mm. Mobile Pedestal Shall Be Coated Of Mdf (Medium Density Fiber ) With Veneer Coating And Pu Coating.The Eru Top Shall Be Of Mdf (Medium Density Fiber) Board Duly Finished With Veneer And Final Pu Coating. Size Of Eru Top 1900 Width Mm X 480 Depth Mm X 550(Not From Ground With Castors).The Main Desk Is Provided Eith The Wire Management System Also There Is Perfect Storage Side Unit , Hod Back Unit Supplying And Placing In Position Back Unit Of The Following Specifications. The Size Of The Back Unit Shall Be 1000 Mm Width X 480 Mm Depth X 2035 Mm Height. The Back Unit Shall Be Made Up Of Mdf Board Duly Finished With Veneer & Final Finish By Pu Coating. The Mobile Unit Can Be Bought In Multiples.Pu Coating Hardness 1.5H. , Hod Room 3 Seater (L)1820*(H)890*(W)920 Thread : Nylon; Fabric; Pure Leather * Material Handling Data Sheet (Msds) For Glue Standard Of Plywood Used: Is 303 Commercial Plywood Thickness 12Mm , Hod Sofa 2 Seater (L)1370*(H)890*(W)920 Thread : Nylon; Fabric: Pure Leather * Material Handling Data Sheet (Msds) For Glue Standard Of Plywood Used: Is 303 Commercial Plywood Thickness 12Mm , Office High Back Chair Providing And Placing In Position High Back Chair. The Cushioned Seats Shall Be Made Of Injection Moulded Plastic Outer And Inner. Plastic Inner Shall Be Upholstered With Pure Leather And Moulded High Resiliance Polyurethane Foamof Density = 45±2 Kg/M³, And Hardness Load 16±2 Kgf As Per Is:7888 For 25% Of Compression. Seat Size Shall Be 47.6 Cm W X 49.2 Cm D. The Back Shall Be Cushioned And Shall Be Made Up Of Pu Foam With Insitu Moulded Ms Erw Round Tube Of Size 1.9±0.03 Cm X 0.16±0.0128 Cm, Upholstered With Pure Leather. Back Size Shall Be 47.5 Cm W X 77 Cm D. The Armrest Top Shall Be Moulded From Polurethane, And Shall Be Upholstered With Pure Leather And Mounted On Ot A Drop Lift Adjustable Type Tubular Armrest Support Made Up Of Ø3.81±0.03 Cm X 0.2±0.01 Cm Thick Ms Erw Tube Having Chrome Plated Finish. The Armrest Hieght Shall Be Adjustable Upto 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Shall Be Designed With The Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Contionuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Options Of Variable Tilt Angle To The Chair, Seat/Backtilting Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Shall Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Shall Be 6.0±0.5 Cm. Back Frame Shall Be Connected To The Up/Down Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 10±0.3 Cm. The Pedestal Shall Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Shall Be 65.0±0.5 Cm Pitch Centre Dia. 5 Nos. Of Twin Wheel Castors Shall Be Injection Moulded In Plastic Having 6.0±0.1 Cm Wheel Diameter And Assembled To Pedestal. , Office Visitor Chair Providing And Placing In Position Visitors. The Cushioned Seats Shall Be Made Of Injection Moulded Plastic Outer And Inner. Plastic Inner Shall Be Upholstered With Pure Leather And Moulded High Resiliance Polyurethane Foamof Density = 45±2 Kg/M³, And Hardness Load 16±2 Kgf As Per Is:7888 For 25% Of Compression. Seat Size Shall Be 47.6 Cm W X 49.2 Cm D. The Back Shall Be Cushioned And Shall Be Made Up Of Pu Foam With Insitu Moulded Ms Erw Round Tube Of Size 1.9±0.03 Cm X 0.16±0.0128 Cm, Upholstered With Pure Leather. Back Size Shall Be 47.5 Cm W X 77 Cm D. The Tubular Frame Shall Be Cantilever Type And Made Of Ø2.54±0.03 Cm X 0.2±0.016 Cm Thick Ss 202 Tube. The Back Shall Be Connected To The Frame Through Chrome Plated High Pressure Die Cast Connector Piece. , Cornertablewalnut Supplying & Placing Corner Table As Per Image. Overall Size : Width : 60Cm Depth : 60Cm Height : 45Cmtable Materials: Glass Of 08 Mm Thk Tempered, Solid Rubber Woood Legs And Frame, Ms Sheet As Bottom Shelf .Decoration Materials & Specifications: (Density / Type): Pu Coating To The Rubber Wood Parts, Clear Glass. As Per Approved Sample And Direction Of Engineer In Charge. , Coffee Table Dimantions-600Mm(W)*1000Mm(L)*428Mm(H)**8Mm(Glass Thk).Material=Glass Of 08Mm Thk Tempered,Solid Rubber Wood Legs & Frame ,Ms Sheet As Bottom Shaf . Decoration Materials- Pu Coateing To Rubber Wood Parts Clear Glass. , Round Conference Table 1050 Dia Supplying & Placing Dining Table As Per Image; Time Out 8 Seater Pu Coated Size Shall Be 2329 Width Mm X 1175 Depth Mm X 750 Height Mm . Top Shall Be 25 Mm Thick Base Material Shall Be 25 Mm Mdf Board . On Top Pu Painting Of Minimum 2H Hardness With 75% Glass As Per Color Chart .Combination Color Graphics On The Centre . Brown Laminate On Bottom Specially Profiled Edges For Comfort . The Understructure Shall Be Having Bend Pipe Structure Of Ms Powder Coated . Pipe Dia 38 Mm , 2 Mm Thick And It Shall Be Fitted With Top By Ss Machine Screws . Legs Shall Be Of Ms Powder Coated And 38 Mm Dia. Pipe Legs Are Fixed With Inderstructure And Table Top . Glide Shall Be Of Plastic Fixed At The Understructure To Prevent The Damage Of Table Top During Stacking . As Per Approved Sample And Direction Of Engineer In Charge. Clerical Mid Back Chair The Seat Shall Be Made Up Of 1.2+/-0.1Cm Thick Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Upholstered With Fabric Or Synthetic Leather And Moulded Polyurethane Foam. The Back Shall Be Made Up 1.2+/-0.1Cm Thick Hot Pressed Plywood Upholstered With Replaceable Fabric Or Synthetic Leather Upholstery Covers And Moulded Polyurethane Foam. The Moulded Polyurethane Foam Shall Be Of Density 45+/-2Kg/M ³, And Hardness Load 16+/-2Kgf As Per Is:7888 For 25% Compression. The Dimensions Of Seat Shall Be- 51.0Cm(W) X 48.0Cm(D) And Of Back Shall Be 48.0Cm(W) X 64.5Cm(H). The Armrest Top Shall Be Made Of Moulded Polyurethane And Mounted On To A Drop Lift Height Adjustable Type M.S Tubular Armrest Support Chrome Plated. The Armrest Height Shall Be Adjustable Up To 6.5+/-0.5Cm In 5 Steps. The Mechanism Of The Chair Shall Have Following Features : 360° Revolving Type, Knee Tilt Synchro Mechanism, Tilt Tension Adjustment, Single Point Control, 4 Position Locking With Anti Shock Feature, Seat/Back Tilting Ratio Of 1:2. Seat Depth Adjustment Of 6.0+/-0.5Cm Should Be Locked In 6 Positions. The Backrest Shall Consists Of A Sliding Up Down Mechanism, Which Can Be Adjusted In The Range Of 7.5+/-0.5Cm And Should Be Locked In 4 Positions For Correct Position Of Lumber Support.The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 9.0 +/- 0.3 Cm. The Pedestial Shall Be Fabricated From 0.2+/-0.02Cm Thick Hr Sheet, Chrome Plated And Assembled With Injection Moulded Black Polypropylene Hub Cap. The Size Of The Pedestal Shall Be 66.0+/- 0.5 Cm Pitch-Centre-Dia (76.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Made Black Nylon. Overall Dimensions Of Chair Shall Be, Width Of Chair - 76.0Cm, Depth Of Chair - 76.0Cm As Measured From Pedestal Below. Height From Ground - Min 89.0 To Max 105.0Cm. Seat Height - Min 46.9 To Max 55.9Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , Conference Table 6 Seater Supplying & Placing Executive Table As Per Image; 2100X2250x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management, Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. As Per Approved Sample And Direction Of Engineer In Charge. , Conference Table 17 Seater Supplying & Placing Executive Table As Per Image; 2100X2250x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management, Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. As Per Approved Sample And Direction Of Engineer In Charge. , Conference Mid Back Chair The Seat Shall Be Made Up Of 1.2+/-0.1Cm Thick Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Upholstered With Fabric Or Synthetic Leather And Moulded Polyurethane Foam. The Back Shall Be Made Up 1.2+/-0.1Cm Thick Hot Pressed Plywood Upholstered With Replaceable Fabric Or Synthetic Leather Upholstery Covers And Moulded Polyurethane Foam. The Moulded Polyurethane Foam Shall Be Of Density 45+/-2Kg/M ³, And Hardness Load 16+/-2Kgf As Per Is:7888 For 25% Compression. The Dimensions Of Seat Shall Be- 51.0Cm(W) X 48.0Cm(D) And Of Back Shall Be 48.0Cm(W) X 64.5Cm(H). The Armrest Top Shall Be Made Of Moulded Polyurethane And Mounted On To A Drop Lift Height Adjustable Type M.S Tubular Armrest Support Chrome Plated. The Armrest Height Shall Be Adjustable Up To 6.5+/-0.5Cm In 5 Steps. The Mechanism Of The Chair Shall Have Following Features : 360° Revolving Type, Knee Tilt Synchro Mechanism, Tilt Tension Adjustment, Single Point Control, 4 Position Locking With Anti Shock Feature, Seat/Back Tilting Ratio Of 1:2. Seat Depth Adjustment Of 6.0+/-0.5Cm Should Be Locked In 6 Positions. The Backrest Shall Consists Of A Sliding Up Down Mechanism, Which Can Be Adjusted In The Range Of 7.5+/-0.5Cm And Should Be Locked In 4 Positions For Correct Position Of Lumber Support.The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 9.0 +/- 0.3 Cm. The Pedestial Shall Be Fabricated From 0.2+/-0.02Cm Thick Hr Sheet, Chrome Plated And Assembled With Injection Moulded Black Polypropylene Hub Cap. The Size Of The Pedestal Shall Be 66.0+/- 0.5 Cm Pitch-Centre-Dia (76.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Made Black Nylon. Overall Dimensions Of Chair Shall Be, Width Of Chair - 76.0Cm, Depth Of Chair - 76.0Cm As Measured From Pedestal Below. Height From Ground - Min 89.0 To Max 105.0Cm. Seat Height - Min 46.9 To Max 55.9Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , Conference High Back Chair The Seat Shall Be Made Up Of 1.2+/-0.1Cm Thick Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Upholstered With Fabric Or Synthetic Leather And Moulded Polyurethane Foam. The Back Shall Be Made Up 1.2+/-0.1Cm Thick Hot Pressed Plywood Upholstered With Replaceable Fabric Or Synthetic Leather Upholstery Covers And Moulded Polyurethane Foam. The Moulded Polyurethane Foam Shall Be Of Density 45+/-2Kg/M ³, And Hardness Load 16+/-2Kgf As Per Is:7888 For 25% Compression. The Dimensions Of Seat Shall Be- 51.0Cm(W) X 48.0Cm(D) And Of Back Shall Be 48.0Cm(W) X 76.0Cm(H). The Armrest Top Shall Be Made Of Moulded Polyurethane And Mounted On To A Drop Lift Height Adjustable Type M.S Tubular Armrest Support Chrome Plated. The Armrest Height Shall Be Adjustable Up To 6.5+/-0.5Cm In 5 Steps. The Mechanism Of The Chair Shall Have Following Features : 360° Revolving Type, Knee Tilt Synchro Mechanism, Tilt Tension Adjustment, Single Point Control, 4 Position Locking With Anti Shock Feature, Seat Depth Adjustment Of 6.0+/-0.5Cm Should Be Locked In 6 Positions. The Backrest Shall Consists Of A Sliding Up Down Mechanism, Which Can Be Adjusted In The Range Of 7.5+/-0.5Cm And Should Be Locked In 4 Positions For Correct Position Of Lumber Support. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 9.0 +/- 0.3 Cm. The Pedestial Shall Be Fabricated From 0.2+/-0.02Cm Thick Hr Sheet, Chrome Plated And Assembled With Injection Moulded Black Polypropylene Hub Cap. The Size Of The Pedestal Shall Be 66.0+/- 0.5 Cm Pitch-Centre-Dia (76.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Made Black Nylon. Overall Dimensions Of Chair Shall Be, Width Of Chair - 76.0Cm, Depth Of Chair - 76.0Cm As Measured From Pedestal Below. Height From Ground - Min 101.5 To Max 117.5Cm. Seat Height - Min 46.9 To Max 55.9Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , 3 Seater (L)1820*(H)890*(W)920 Thread : Nylon; Fabric; Pure Leather * Material Handling Data Sheet (Msds) For Glue Standard Of Plywood Used: Is 303 Commercial Plywood Thickness 12Mm , 2 Seater (L)1370*(H)890*(W)920 Thread : Nylon; Fabric: Pure Leather * Material Handling Data Sheet (Msds) For Glue Standard Of Plywood Used: Is 303 Commercial Plywood Thickness 12Mm , 1 Seater (L)920*(H)890*(W)920 Thread : Nylon; Fabric: Pure Leather * Material Handling Data Sheet (Msds) For Glue Standard Of Plywood Used: Is 303 Commercial Plywood Thickness 12Mm , Cornertablewalnut Supplying & Placing Corner Table As Per Image. Overall Size : Width : 60Cm Depth : 60Cm Height : 45Cmtable Materials: Glass Of 08 Mm Thk Tempered, Solid Rubber Woood Legs And Frame, Ms Sheet As Bottom Shelf .Decoration Materials & Specifications: (Density / Type): Pu Coating To The Rubber Wood Parts, Clear Glass. As Per Approved Sample And Direction Of Engineer In Charge. , Coffee Table Dimantions-600Mm(W)*1000Mm(L)*428Mm(H)**8Mm(Glass Thk).Material=Glass Of 08Mm Thk Tempered,Solid Rubber Wood Legs & Frame ,Ms Sheet As Bottom Shaf . Decoration Materials- Pu Coateing To Rubber Wood Parts Clear Glass. , Reception Table Supplying & Placing Executive Table As Per Image; 1800X2100x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. As Per Approved Sample And Direction Of Engineer In Charge. , 3 Seater (L)1820*(H)890*(W)920 Thread : Nylon; Fabric; Pure Leather * Material Handling Data Sheet (Msds) For Glue Standard Of Plywood Used: Is 303 Commercial Plywood Thickness 12Mm , Cornertablewalnut Supplying & Placing Corner Table As Per Image. Overall Size : Width : 60Cm Depth : 60Cm Height : 45Cmtable Materials: Glass Of 08 Mm Thk Tempered, Solid Rubber Woood Legs And Frame, Ms Sheet As Bottom Shelf .Decoration Materials & Specifications: (Density / Type): Pu Coating To The Rubber Wood Parts, Clear Glass. As Per Approved Sample And Direction Of Engineer In Charge. , Coffee Table Dimantions-600Mm(W)*1000Mm(L)*428Mm(H)**8Mm(Glass Thk).Material=Glass Of 08Mm Thk Tempered,Solid Rubber Wood Legs & Frame ,Ms Sheet As Bottom Shaf . Decoration Materials- Pu Coateing To Rubber Wood Parts Clear Glass. , Work Station1200*600 Providing And Placing Panel & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims. Tiles: Combination Of Top Tiles Are Fabric Magnetic/Fabric/Fabric Tackable/White Board/Glass Writing Board/ Clear Glass Tile/ Plain Metal/ Prelam Tile. Bottom Tiles - Plain Metal/ Fabric Magnetic / Fabric / Laminated /Prelam. The Panel Thickness Comprises Of 38Mm (35 Mm Minimum) Thick Paper Honeycomb + 3Mm Mdf On Each Sides + 0.6Mm Decorative Laminate Or Fabric On Both Sides. The Uprights And Horizontals Shall Be Made Of Aluminium Extrusion Having Average Wall Thickness Of 1.2 Mm & Powder Coated With Epoxy- Polyester Powder. Particle Board Framing Is Used On Outer Boundary Of These Blocks As Well As Intermediately At Certain Locations Forming Conduit For Passing Cables. These Blocks Are Located In The Mid Segment Of The Panels And Can Be Provided With Cutouts For Mounting Switch Boxes (Above Or Below The Worktops)Fabricated Bottom Frame For 52.4Mm (50Mm Minimum) Panel Comprises Of L-Channels Made Of 2Mm Thick Crca Steel (Is: 513), Formed Plates Of 3Mm Thick Hr Steel (Is: 2062) & Erw Steel Tube Of Size 35 Mm (30 Mm Minimum) X15 Mm (10Mm Minimum)X1.6Mm Thick In Oval Cross Section (Is: 7138) Welded Together. This Frame Is Bolted To The Uprights With M6 Screws. Top Tiles Can Be Offered In Variety Of Combinations. Worksurface- Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1200Mm X 600Mm X 750H. Brackets Shall Be Made From 2Mm Thick Crca Steel. Pedestals With Legs - Nova Pedestal Flat Metal Front, Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Height 3Dr = 2Box+1File. The Work Shall Be Carried Out As Per The Instructions And Guidance Received From Engineer Incharge. , Work Station Module (1500*600) , Back Chair The Seat Assembly Shall Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Shall Be Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Dimensions Of Seat Shall Be 47.0 Cm. (W) X 48.0 Cm. (D). The Back Asembly Shall Be Made Of Powder Coated (Dft 40-60 Microns) Tubular Frame Of Dia 2.54 ±0.03Cm. X 0.2±0.016Cm Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Shall Be Upholstered Using Net Fabric With High Tenacity Yarn. The Dimensions Of Back Shall Be 46.5 Cm (W) X 70.5 Cm (H). The Hr Polyurethane Foam Shall Be Moulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The One-Piece Armrests Shall Be Injection Moulded From Black Co-Polymer Polypropylene. The Mechanism Shall Be Designed With 360° Revolving Type, 17±2° Maximum Tilt M Pivot At Centre, Upright Position Locking., Tilt Tension Adjustment. The Pneumatic Height Adjustment Shall Has An Adjustment Stroke Of 11.0 ±0.3Cm. The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Injection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.3 ±0.5Cm. Pitch-Center Dia. (76.3 ±1.0Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 43.3 To Max 54.3Cm, Height - Min99.5 To Max 110.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. , Visitor Chair The Seat Assembly Shall Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Shall Be Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Dimensions Of Seat Shall Be 47.0 Cm. (W) X 48.0 Cm. (D). The Back Asembly Shall Be Made Of Powder Coated (Dft 40-60 Microns) Tubular Frame Of Dia 2.54 ±0.03Cm. X 0.2±0.016Cm Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Shall Be Upholstered Using Net Fabric With High Tenacity Yarn. The Dimensions Of Back Shall Be 46.5 Cm (W) X 60.5 Cm (H). The Hr Polyurethane Foam Shall Be Moulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The One-Piece Armrests Shall Be Injection Moulded From Black Co-Polymer Polypropylene. The Powder Coated (Dft 40-60 Microns) Tubular Frame Shall Be Cantilever Type & Made Of Dia 2.54±0.03Cm X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. Overall Dimensions Of Chair Shall Be Seat Height - 46.5Cm, Height - 93.5Cm, Width & Depth Of Chair As Measured From Pedestal -Width-61.0 Cm And Depth-64.5 Cm

Contact Information