|
Tender For Provision Of Single Jcos Accommodation Of 41 Inf Bde Sig Coy With Lgsf Technology Under Ge(East) Lucknow.; 7 SCh A Part VI MISCELEOUNEOUS ITEMSS&F 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed. 8 S&F CP grating with or witout waste hole size 100 mm fixed with white cement in tiles flooring. 9 S&F brass chromium plated wall mixer for mixing hot & cold water in 3-in-1 with1.50m long flexible lead & screwed down for iron pipe of 15mm bore all as specified and as directed. 10 M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories as required for the following :- 11 One light point or fan point controlled by one switch. 12 One socket outlet 6 amp controlled by one switch on indepdendent board. 13 One socket outlet 6 amp controlled by one switch on the same board with other switches. 14 M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories as required for one 16 amp power point controlled by one switch. 15 S&F white cover plate with frame 12 module. 16 S&F modular metal boxes 1.0 mm thick 12 module including wall cutting for conealing and making good disturbed surface as required. 17 S&F of Modular switch single pole, one way 6A, 230V, AC, one module. 18 S&F of Modular switch single pole, one way 16A, 230V, AC, one module. 19 S&F of Modular socket 2/3 pin combined 6A, 230V AC, two module. 20 S&F of Modular socket 6A/16A2/3 pin combined 230V, AC, two module. 21 S&F of modularbell push single pole 1 module, 6A, 230V. 22 S&F of call bell, ding dong /musicalAC single phase 230 volts. 23 S&F of MCB distribution board, VTPN, 4 way, powder coated CRCA steel sheet suitable for MCCB incomer 125 amp, 4 way, 415 volts, degree of protection IP 43 - IK- 09 with double door, recess mounted, having 250 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces wherever required comprising of the following:- 24 Incoming: One number MCCB, 4 Pole, 63 A,, 415 V, 50 Hz, 16 KA (Icu=Ics), thermally adjustable between 70% to 100%. 25 Outgoing: Twelve numbers MCB, SP, AC, 240V, 50 Hz, 10 KA, 32A, C series ISI marked. 26 S&F of 20 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole C series MCB 16 amp as required. 27 Note for MCB DB & MCB: MCB DB & MCB shall be of same make. 28 S&F ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three terminals polycarbonate insulated body complete. 29 S&F of Modular TV Socket 1 Module. 30 S&F of Modular Telphone Socket 1 Module. 31 S&F LED surface mounted Batten 20 watt, powder coated die cast / extruded aluminium Body (Thickness = 1.20 mm) and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50 Hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.=0.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED Driver & electrical circuitary), of minimum 50000 burning hours with 70% of initial Lumen maintained till life ends, CCT 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect including connections with suitable size FRLS, PVC insulated copper conductor cable and earthing etc as required with Minimum 5 year OEM warranty. System lumen efficacy 120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 32 S&F LED surface mounted mirror light 10 watt, powder coated die cast / extruded aluminium Body (Thickness = 1.20 mm) and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50 Hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.=0.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED Driver & electrical circuitary), of minimum 50000 burning hours with 70% of initial Lumen maintained till life ends, CCT 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect including connections with suitable size FRLS, PVC insulated copper conductor cable and earthing etc as required with Minimum 5 year OEM warranty. System lumen efficacy 120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 33 S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with polycarbonate body duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete 34 S&F Solar integral AIO street light with aluminium housing, with IP 65 & IK 08 protection, lithium / Life Po4 battery capacity min 20 Ah @ 3.2V or 20w 4.5V, PV panel power CRI >=70, system efficacy >165 lm/W, minimum lumen 4000 system wattage should not be more than 25W ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. The fixture should have microwave motion sensor & sensor dealy time 18 secondsLife class of LED 50000 hrs including suitable size GI pipe medium grade bracket with clamps and fastner for fixing the lights as required. 35 Supplying and laying or fixing DWC HDPE pipe alongwith all accessories like socket, bend, couplers etc ISI marked as per IS-16205 (Part-24) including cutting/ jointing laid in trenches, wall, floor etc as required 63 mm outer dia and 50 mm inner dia (for cable protection) complete. 36 S&Fstreet light fitting 45W Pressure die cast aluminium housingwith system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66, IK-10 single piece die cast incl spigot, dia 48-76mm, LED life time (L70B50) 75k hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings, preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, including dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention uptofive yeras, auto switching off secondary powerfor module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module, surge protection including suitable size of GI pipe medium grade bracket with clamps and fastner for fixing the lights as required. 37 Supply and fixingstorage water heater (Geyser) vertical typeof capacity 50 ltrs, 230 voltswhite in colour,working pressure min 0.8 Mpa with glass lined coated tank,magnesium anode,adjustable thermostat,enamel coated incology heating element 2KW,ABS Plastic body,Product warranty -2 years,Heating element warranty-4 years,inner tank warranty-7 years,including includingfour nos of full threaded fastener od size 100x10mm with 2 Nos washer incl water supply connection , testingafter installation complete all as specified and directedby Engr-in-Charge. 38 S&F Ceiling fan 1200 mm sweep, BEE star rated 5 with brush less direct current (BLDC) motor, class of insulation: B, 3 Nos blades, up to 90 cm long down rod, canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value(CM/M/W) minimum 6.00, air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max), insulation resistance more than 2 mega ohm suitable for230V, 50 Hz including taking down old fans and depositing in MES store yard complete. 39 S&F wall mounted fan with powder coated gaurds and blades of approved colour, AC single phase, 230 volts, 50 Hz, 1440 RPM, 400 mm sweep with adjustable vertical angles and three speeds controls mounted within easy reach of hands with necessary connecting cable recommended / provided by manufacturer complete. 40 S&F Fresh air fan of size 250 mm sweep PVC body complete withlouvers connecting up including suitable size three core flexible copper cable from ceiling rose to fresh air fan as required. 41 S&Fdecorative wall mounted fancy light fitting made up of brass rubi lamp brand double handed item including of thred type bulb of 9-15 wattscovered by glasscomplete all as specified. 42 M&L for Septic tanks, exc, in ordinary soil, foundationIn PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 10 users. RefCELZTD/217 43 Soakage well ells exc, in hard soil, foundation in PCC 1:3:6 wells of honey combed bricks work in CM ,RCC Cover slab Filling with bricks bats, complete of size 1.80M dia X 3.00M deep RefCELZTD/576
|
