|
Childrens Recreational Set Six Tables, Six Chairs And A Central Table Chair: Must Be Produced In Engineering Thermoplastic Polypropylene Copolymer With Added Fiberglass, Free From Toxic Elements, Following The Monobloc Concept, Where All The Parts That Make Up The Product Must Be Produced Through A Single Injection Cycle And Can Be Stacked In Up To Eight Units. The Feet Must Be Type V, And Originate Close To The Central Region Of The Seat. The Lower End Of The Feet Must Receive Shoes, Which Must Be Manufactured In Rsn Hytrel, In Order To Avoid Direct Contact Between The Feet And The Support Surface. Table: Childrens School Size With Simplified Assembly And Also Allows Use As A Childrens Toy. It Must Comprise A Structural Body, A Book Portal And A Top Substantially In Trapezoidal Shape. The Body Must Be Integral In A Polyhedral Shape And Be Molded In An Injection Process With Thermoplastic Called Polypropylene Copolymer In A Single Piece, And Be Composed Of A Wide Front Foot With A U-Shaped Cross Section, Facing Inward, Two Rear Feet Also In A U Shape, Facing Forward And Gently Arched, Upper Beams And Lower Beams Of Connecting The Front Feet To The Rear Feet. The Top Must Have A Substantially Trapezoidal Shape And Be Molded Using An Injection Process With Material Called Abs, With A Smaller Rounded Base And Chamfers At The Ends Of The Larger Bases. It Must Have A Transverse Groove, Positioned Next To The Smaller Base Of The Top, Which Will Serve As An Object Holder. The Portal Booklet Must Present The Shape Of A Triangular Plate And Be Molded By The Injection Process With A Material Called Polypropylene Copolymer, With A Rounded Front Vertex, And Be Fitted On Rails Situated On The Internal Surfaces Of The Upper Body Crosses And Be Fixed By Means Of Protruding Pins That Project From The Plate And Penetrate Into Holes In The Upper Sleepers. The Central Union Table Must Be Consisting Of Two, Youth School Set. The Chair Must Be Composed Of: Metallic Structure, Seat, Back, Tips, Shoes And Plastic Fasteners, And Two Screws. The Seat Must Be Made Of Injected Polypropylene Copolymer And Anatomically Molded With A Textured Finish And Dimensions Of 395 Mm Wide, 340 Mm Deep, 4 Mm Thick Wall With Rounded Corners, Mounted To The Structure By Means Of A Fitting Throughout The Base Tube At The Front Of The Chair And 2 Two Cavities Reinforced With 2 Mm Thick Fins, Which Accommodate Self-Tapping Screws For Plastic With A Diameter Of 5X25 Mm Phillips Slot. On The Front Part, Which Will Be In Contact With The Users Legs, It Must Be Provided With A Rounded Edge With A Radius So As Not To Obstruct Blood Circulation. The Height Of The Seat To The Floor Must Be 380 Mm. The Backrest Must Be One-Piece, Without Any Type Of Ventilation Or Opening, Made Of Injected Copolymer Polypropylene And Anatomically Molded With A Textured Finish. Its Dimensions Must Be 398 Mm Wide By 185 Mm High, With An Average Wall Thickness Of 3.5 Mm. The Piece Must Have Rounded Corners And Be Connected To The Structure By Means Of Fittings From Its Posterior Cavities To The Tubes Of The Metal Structure Of The Chair And Must Be Locked By Two Retractable Pins Injected In Polypropylene Copolymer, In The Same Color As The Backrest, Eliminating The Need For Rivets Or Screws. The Structure Should Be
|