Tender For 1)Proposed Construction And Five Year Maintenance Of High Level Bridge At Ch 4/460 Across Local S ... in India

Work Detail

Tender For 1)Proposed Construction And Five Year Maintenance Of High Level Bridge At Ch 4/460 Across Local Stream On Vaduj To Dalmodi Road Tal. Khatav Dist. Satara Clearing And Grubbing Road Land Including Uprooting Wild Vegetation, Grass, Bushes, Shrubs, Saplings And Trees Of Girth Upto 300 Mm, Removal Of Stumps Of Such Trees Cut Earlier And Disposal Of Unserviceable Materials And Stacking Of Serviceable Material To Be Used Or Auctioned, Upto A Lead Of 1000 M Including Removal And Disposal Of Top Organic Soil Not Exceeding 150 Mm In Thickness As Per Technical Specification Clause 201. As Directed By Engineer In Charge. , Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 M As Per Technical Specification Clause 202. Cement Concrete.As Directed By Engineer In Charge. , Removing All Types Of Hume Pipes And Stacking Within A Lead Of 1000 M Including Earthwork And Dismantling Of Masonry Works As Per Technical Specification Clause 202. Above 600 Mm To 900 Mm Dia Hume Pipe. As Directed By Engineer In Charge. , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting With Vibratory Roller To Meet Requirement Of Tables 300.1 And 300.2 As Per Technical Specification Clause 301.5.For Lead Upto 250 M.As Directed By Engineer In Charge. , Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacting With Vibratory Roller To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1.As Directed By Engineer In Charge. , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Vibratory Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401.For Grading Ii Material.As Directed By Engineer In Charge. , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening/Binding Materials To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405.By Mechanical Means.As Directed By Engineer In Charge. , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405.By Mechanical Means.As Directed By Engineer In Charge. , Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate ( Natural Sand/ Vsi Grade Finely Washed Crushed Sand) Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, , Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Batching Plant/ Weigh Batch Mixer, Transported To Site With All Leads And Lifts, Laid With A Paver With Electronic Sensor /By Suitable Means As Approved By Engineer-In-Charge , Compacting With Vibratory Roller, Finishing, Curing And Including Preparation Of Subgrade Surface If Required Etc. Complete. As Directed By Engineer In Charge. , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Dry And Hungry Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503.As Directed By Engineer In Charge. , Providing And Constructing 50 Mm. Thick Modified Penetration Macadam (Mpm) Road Surface Including All Mataerials, Preparing The Existing Road Surface, Spreading 40Mm. Stone Metal Layers 30% Crusher Broken Metal + 70% Hand Broken (By Breaking Rubble Obtained By Blasting) Heating And Spraying The Bitumen Of Specified Grade @ 1.75 Kg/Sqm, Spreading 12Mm.Size Chips Compacting With Static Roller Having Weight 8 To 10 Mt. To Achive The Desired Degree Of Compaction As Per Technical Specification Clause 506 Etc. Complete. Including Picking Of Existing Wbm Surface.(Vg-30 Bulk Bitumen Rates Are Considered To Arrive At Rates).As Directed By Engineer In Charge. , 20Mm Thick Open-Graded Premix Carpet Bituminous (Penetration Grade/Modified Bitumen) Binder Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type A Or Type B Or Type C As Per Technical Specification Clause 508. (Excluding Seal Coat) By Mechanical Means (I) Bitumen (S-65) Vg-30 As Direct By Engineer In Charge , Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type A , Type B (By Paver Finisher) And Type C As Per Technical Specification Clause 510.By Mechanical Means.Case - I : Type A-Bitumen (S-65) Vg-30.As Directed By Engineer In Charge. , Construction Of Un-Reinforced, Dowel Jointed At Expansion And Construction Joint Only, Plain Cement Concrete Pavement, Thickness As Per Design, Over A Prepared Sub Base, With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M30 (Grade), Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Capacity And Appropriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork (Steel Channel,Edges, Steel Plates Including Levelling The Formwork As Per Drawing), Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continuous Operation Including Provision Of Construction And Expansion, Construction Joints, Applying Debonding Strips, Primer, Sealant, Admixtures As Approved, Curing Of Concrete Slabs For 14-Days, Using Curing Compound (Where Specified) And Water Finishing To Lines And Grade As Per Drawing And Technical Specification Clause 1501(Excluding Dowel Bars And Polythene Sheet).As Directed By Engineer In Charge. , Providing And Laying Cement Concrete Pipe Of Is 458:2003 Np-3 Class Of 600Mm Diameter In Proper Line, Level And Slope Etc. Complete.As Directed By Engineer In Charge. , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material.Ordinary Soil. Upto 3 M Depth By Mechanical Means ( This Item Shall Be Used When Total Estimate Quantity Exceeds 100 Cum) As Directed By Engineer In Charge. , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ii. Ordinary Rock (Not Requiring Blasting) Up To 3 Meter Depth.As Directed By Engineer In Charge. , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ii. Hard Rock (Blasting Prohibited) Upto 3 M Depth Including 1.5 M Depth In Hard Rock.As Directed By Engineer In Charge. , Dewatering On Bhp Basis By Using Water Pump Including Diversion Of Stream, Providing Cofferdams, Earthern Bunds Etc. As May Be Necessary For Foundation And Other Parts Of The The Works And Pumping Out Water During And After Excavation As May Be Required By Using 5.0 To 9.0 Bhp Pump Etc. Complete. (Prior Approval Of Superintending Engineer Will Be Necessary). As Directed By Engineer In Charge. , Providing & Placing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 I) Plain Cement Concrete Grade M 10 (I)Nominal Mix 1:3:6. As Directed By Engineer In Charge. , Providing & Placing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 Ii) Plain Cement Concrete Grade M 15 (I)Nominal Mix (1:2.5:5). As Directed By Engineer In Charge. , Filling Annular Space Around Footing In Rock As Per Technical Specification Clause 1203.4.3. In Plain Cement Concrete M15.As Directed By Engineer In Charge. , Supplying, Fitting And Placing Tmt Bar Reinforcement In Foundation Complete As Per Drawings And Technical Specifications Clauses 1000 And 1202 , Providing & Placing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 V) Reinforced Cement Concrete Grade M 30 Reinforced Cement Concrete. As Directed By Engineer In Charge. , Providing And Laying Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 And 1204 ,For Height Up To 5 Meter I) Plain Cement Concrete Grade M 15 (I) Nominal Mix (1:2.5:5). As Directed By Engineer In Charge. , Providing And Laying Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 And 1204 ,For Height Up To 5 Meter Iv) Reinforced Cement Concrete Grade M 30. As Directed By Engineer In Charge. , Supplying, Fitting And Placing Tmt Bar Reinforcement In Substructrue Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202.As Directed By Engineer In Charge. , I) Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7.P.V.C. Pipe 100 Mm Dia.As Directed By Engineer In Charge. , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Technical Specification Clause 1204.3.8.As Directed By Engineer In Charge. , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Technical Specifications Clauses 800, 1205.4 And 1205.5. Reinforced Cement Concrete Grade M 30.As Directed By Engineer In Charge. , Supplying, Fitting, And Placing Tmt Bar Reinforcement In Superstructure Complete As Per Drawing And Technical Specifications Clauses 1002, 1010 And 1202.As Directed By Engineer In Charge. , Providing And Laying Cement Concrete Wearing Course M 30 Grade Including Reinforcement Complete As Per Drawing And Technical Specifications Clauses 800 And 1206.3.As Directed By Engineer In Charge. , Providing Fitting And Fixing Mild Steel Railing Complete As Per Drawing And Technical Specifications Clause 1208.2.As Directed By Engineer In Charge. , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement @ 50Kg/Cum And Formwork Complete As Per Drawing And Technical Specifications Clauses 800 And 1211.As Directed By Engineer In Charge. , Providing Tar Paper Bearing Including Laying In Proper Position Etc. Complete..As Directed By Engineer In Charge. , Providing Expansion Joints With 25Mm Thick Bituminous Pad As Per Detailed Drawings Etc. Complete.As Directed By Engineer In Charge. , Printing New Letter And Figures Of Any Shade With Synthetic Enamel Paint Black Or Any Other Approved Colour To Give An Even Shade As Per Drawings And Technical Specification Clause 1701 Ii) English And Roman Hyphens, Commas And The Like Not To Be Measured And Paid For. Detail For 100 Letters Of 160 Millimeter Height, I.E. 1600 Centimeter. As Directed By Engineer In Charge. , Providing And Fixing Cautionary/Warning Sign Boards In Equilateral Triangle Size Of 600Mm Made Out Of 3Mm Aluminum Composite Material Sheet Bonded With White Retro Reflective Sheeting Of Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip) Having Pressure Sensitive/Heat Activated Adhesive Retoreflective Specified Back Ground, Border And Back Side Retoreflctive Symbols, Letters, Numerals, Arrow As Per Irc:67-2012 Table No 8.3 Supported With Back Support Frame 25Mm X 25Mm X 3Mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Of M. S. Angle Iron Post Of Size 65 Mm X 65 Mm X 6 Mm, 3.45 M Long, Duly Painted With With Flat Oil Paint Having Alternate Black And White Bands Of 25 Cm Width Including G.I. Fixtures Etc; Fixing The Boards In M25 Grade Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc; Complete. Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip) Shall Have 7 Years Written Warranty From The Manufacturer And Authorised Distributor/Convertor Issued For Field Performance Including The Screen Printed Areas And Cut-Out Sheeting And Cut-Out Durable Transparent Overlay Film And This Warranty Certificate In Original Should Be Submitted To The Engineer In Charge By The Contractor/Supplier. , Providing And Fixing Of Retro- Reflectorised Informatory Sign Board Rectangular/Square In Shape Having Area Less Than 0.9 One Square Meterr Made Out Of ____Mm Aluminum Sheet Bonded With White Retro Reflective Sheeting Of Class __ ( Type Iv High Intensity Microprismatic Grade Sheeting-Hip) Having Pressure Sensitive/Heat Activated Adhesive Retoreflective Specified Back Ground, Border And Back Side Retoreflctive Symbols, Letters, Numerals, Arrow As Per Irc:67-2012 Table No 8.3, Supported With Back Support Frame 25Mm X 25Mm X 3Mm, Duly Painted On Back Side With Two Coats Of Grey Stove Enamel Paint And Supported On One No. Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm, 3.5 Mt Long Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M25 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm, 60 Cm Below Ground Level As Per Approved Drawing The Angle Iron Post Shall Be Duly Painted With One Coat Of Epoxy Primer And Two Coats Of Epoxy Finish Paints Having Alternate Black And White Bands Of 25 Cm Width Including Gi Fixures And Transportation Etc.Complete.The Nut Bolts Of Board With Angle Iron Post/Supporting Structure After Fixing At Site Has To Be Electrically Welded. Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip) Sheeting Shall Have 7 Years Written Warranty From The Manufacturer And Authorised Distributor/Convertor Issued For Field Performance Including The Screen Printed Areas And Cut-Out Sheeting And Cut-Out Durable Transparent Overlay Film And This Warranty Certificate In Original Should Be Submitted To The Engineer In Charge By The Contractor/Supplier. 2Mm Aluminum Sheet Class B.As Directed By Engineer In Charge. , Providing And Fixing Aluminum-Backed Flexible Prismatic (Afp) Sheeting Consisting Yellow Colored Flexible Prismatic Sheeting With Non-Metallic Prismatic Lens As Retroreflective Elements And Conforming To Astm D 4956-09 Type Vi Specification For Rebound Able Retroreflective Sheeting. This Flexible Prismatic Sheeting Shall Be Of 1Ft Width And Laminated At The Back With A 50 Micron Aluminum (Al) Foil With Pressure Sensitive Adhesive And Liner. Further, This Flexible Prismatic Sheeting Shall Have Screen Printed Arrow/Slant Line Pattern In Black Color In A Continuous Roll Format. Neither Afp Sheeting Nor The Flexible Prismatic Sheeting Used In It Shall Crack When Slowly Bent In 1 Second Time Around A 1/8Th Inch Mandrel After Being Conditioned For 24Hrs At 0?C And Tested As Per Section S2.2.2. Of Astm D 4956-09. The Afp Sheeting, With The Liner Removed, Shall Be Applied With A Neoprene Contact Adhesive With A Polychloroprene As Base, Viscosity Of 200- 450 Cps And Solid Content Of 20-30%. Once Applied, The Edges Of The Product Shall Be Sealed All Around With A Two-Part Epoxy Based Structural Adhesive And Shall Be Extremely Resistant To Peel-Off. A Test Report From Institutes Like Arai/Crri Confirming To Above Mentioned Flexibility And Astm-D4956-09 Type-Vi Retro Reflectivity Performance Of The Flexible Prismatic Sheeting Used In Afp Shall Be Submitted By The Tenderer During Prequalification And Supply Of Material.As Directed By Engineer In Charge. 500Mm X 600Mm , Providing And Fixing Of Typical Pmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1 As Directed By Engineer In Charge. , Providing And Fixing Informatory Sign Boards In Square Or Rectangular Shape Of Size 1.80M X1.20M Made Out Of 3Mm Aluminum Composite Panel Bonded With Irc Specified Colour Of Retro Reflective Sheeting Of Type Iv High Intensity Micro-Prismatic Grade Sheeting (Hip) Having Pressure Sensitive / Heat Activated Adhesive, Irc Specified Colour Retro Reflective Cutout Border & Messages Having Pressure Sensitive Adhesive Having Border & Messages In Irc Specified Colour Background Including M. S. Angle Iron Frame Of Size 35 Mm X 35 Mm X 5 Mm & Two M.S. Angle Iron Post Of Size 65 Mm X 65 Mm X 6 Mm, 3.65 M Long, Duly Painted With Flat Oil Paint Having Alternate Black And White Bands Of 25 Cm Width Including G.I. Fixtures Etc; Fixing The Boards In M-20 Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc; Complete. Aluminum Composite Panel With Type Iv High Intensity Micro-Prismatic Grade Sheeting.As Directed By Engineer In Charge. , Painting Two Coats Including Primer Coat After Filling The Surface With Synthetic Enamel Paint In All Shades On New, Plastered / Concrete Surfaces As Per Drawing And Technical Specification Clause 1701, As Directed By Engineer In Charge. , Reinforced Cement Concrete M15 Grade Boundary Pillars/Local Stone Of Standard Design As Per Irc:25, Fixed In Position Including Finishing And Lettering But Excluding Painting As Per Drawing And Technical Specification Clause 1704, As Directed By Engineer In Charge. , Providing And Fixing Informatory Sign Boards In Rectangular Shape Of Size 1.20M X 0.90M Made Out Of 16 Guage Aluminum Panel Bonded With Irc Specified Colour Of Retro Reflective Sheeting Of Type Iv High Intensity Micro-Prismatic Grade Sheeting (Hip) Having Pressure Sensitive / Heat Activated Adhesive, Irc Specified Colour Retro Reflective Cutout Border & Messages Having Pressure Sensitive Adhesive Having Border & Messages In Irc Specified Colour Background Including M. S. Angle Iron Frame Of Size 35 Mm X 35 Mm X 3 Mm & Two M.S. Angle Iron Post Of Size 65 Mm X 65 Mm X 6 Mm, 3.65 M Long, Duly Painted With Flat Oil Paint Having Alternate Black And White Bands Of 25 Cm Width Including G.I. Fixtures Etc; Fixing The Boards In M-20 Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc; Complete. Aluminum Panel Type Iv High Intensity.As Directed By Engineer In Charge. , Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media As Per Drawing And Technical Specifications Clause 1302 I) Stone/Boulder As Directed By Engineer In Charge. , Providing And Laying 0.90 Meter Thick Metal Mat Consisting Of Rubble, Oversize Metal And Normal Size Metal In Specified Thickness As Per Detailed Drawing Including Supplying All Materials, Hand Packing Of Rubble, Spreading Metal In Layers And Hard Murum Including Watering And Compaction With Power Roller Etc. Complete.As Directed By Engineer In Charge. , Supplying And Fixing Of Molded Shank Raised Pavement Markers / Cats Eye Made Of Polycarbonate And Abs Moulded Body And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw/Nh/33023/10-97 Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 102 +/- 2 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 +/- 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (Of Diameter Not Less Than 19 +/- 2 Mm And Height Not Less Than 30+/- 2 Mm) From The Body Is To Be A Minimum Value Of 500 Kg. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer.The Contractor Shall Submit A Two Year Warranty For Satisfactory Field Performance Including Stipulated Retro-Reflectance Of The Reflecting Panel, To The Engineer. As Directed By Engineer In Charge. , Road Marking With Hot Applied Thermoplastic Compound With Reflectorizing Glass Beads On Bituminous Surface- Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorizing Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes.Complete. As Directed By Engineer In Charge. , Metal Beam Crash Barrier -- Type - B, Thrie : Metal Beam Crash Barrier (Providing And Erecting A Thrie Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Metal Beam Rail, 85 Cm Above Road/Ground Level, Fixed On Ismc Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 2 M High With 1.15 M Below Ground Level, All Steel Parts And Fitments To Be Galvanised By Hot Dip Process, All Fittings To Conform To Is:1367 And Is:1364, Metal Beam Rail To Be Fixed On The Vertical Post With A Space Of Channel Section 150 X 75 X 5 Mm, 546 Mm Long Complete As Per Clause 810).As Directed By Engineer In Charge. , Providing White And Colour Washing To Road Side Trees In 2 Coats In 2 Bands Of White And One Red Band At Centre Of 30 Cm Height Each Including Preparing The Surface, Cost Of Material, Conveying Etc. Complete. As Directed By Engineer In Charge. , Providing And Fixing Reflective Fluorescent Tape On Old Road Sign Board Including Cleaning / Scraping And Painting Existing Board Etc. Complete As Directed By Engineer In Charge. , 2) Construction Of Bridge Onwaduj To Wakeshwar_Ch_0-850 Tal.-Khatav _Dist. Satara Clearing Grass And Removal Of Rubbish Up To A Distance Of 30 M Outside The Periphery Of The Area As Per Technical Specification Clause 201. , Cost Of Utility Shifting & Rising , Dismantling Of Cement Concrete Pavement By Mechanical Meansusing Pneumatic Tools,Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto Alead Of 1000 Metres,Stacking Serviceable And Unserviceable Materials Separately Etc. Complete. , Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 M As Per Technical Specification Clause 202. , Removingnp-2Andnp-3 Class Pipes Including Stacking At Road Side As Directed By The Engineer In Charge. Upto 900Mm Dia And Above. Etc Complete , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. , Ordinary Rock (Not Requiring Blasting) , Hard Rock (Requiring Blasting) , Dewatering On Bhp Basis By Using Water Pump Including Diversion Of Stream, Providing Cofferdams, Earthern Bunds Etc. As May Be Necessary For Foundation And Other Parts Of The The Works And Pumping Out Water During And After Excavation As May Be Required By Using 5.0 To 9.0 Bhp Pump Etc. Complete. (Prior Approval Of Superintending Engineer Will Be Necessary) , Providing Concrete For Plain/Reinforced Concrete M-15 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain Cement Concrete M-30 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 Plain Cement Concrete Grade M 30 , Providing Concrete For Plain/Reinforced Concrete M-30 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-25 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Supplying, Fitting And Placing Hysd Bar Reinforcement In Foundation Complete As Per Drawings And Technical Specifications Clauses 1000 And 1202 , Filling Annular Space Around Footing In Rock As Per Technical Specification Clause 1203.4.3 , Plain Cement Concrete M-30 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 Plain Cement Concrete Grade M 30 , Plain/Reinforced Cement Concrete M-30 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Plain/Reinforced Cement Concrete M-25 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Technical Specification Clause 1204.3.8 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Technical Specification Clause 1204.3.8 , Providing And Laying 0.90 Meter Thick Metal Mat Consisting Of Rubble, Oversize Metal And Normal Size Metal In Specified Thickness As Per Detailed Drawing Including Supplying All Materials, Hand Packing Of Rubble, Spreading Metal In Layers And Hard Murum Including Watering And Compaction With Power Roller Etc. Complete. , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Providing And Laying Reinforced Cement Concrete M-30 In Superstructure As Per Drawing And Technical Specifications Clauses 800, 1205.4 And 1205.5 , Supplying, Fitting, And Placing Hysd Bar Reinforcement In Superstructure Complete As Per Drawing And Technical Specifications Clauses 1002, 1010 And 1202 , Drainage Spouts Complete As Per Drawing And Technical Specifications Clause 1209 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Technical Specifications , Providing Expansion Joints With 25Mm Thick Bituminous Pad As Per Detailed Drawings Etc. Complete. , Providing Tar Paper Bearing Including Laying In Proper Position Etc. Complete. , Providing And Laying Cement Concrete Wearing Course M 30 Grade Including Reinforcement Complete As Per Drawing And Technical Specifications Clauses 800 And 1206.3 , Providing And Fixing In Position Pipe Railing Consisting Of Is Rolled Steel Joist Posts Designation Is Mb 100 (100X75) At 2.5 M Interval And Three Rows Of 50 Mm Dia Steel Pipes (Light) Including Fixing In Position On Bridge Deck Complete As Per Drawing And Technical Specifications Clause 1208. , Painting Two Coats Including Primer Coat After Filling The Surface With Synthetic Enamel Paint In All Shades On New, Plastered / Concrete Surfaces As Per Drawing And Technical Specification Clause 1701 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Laying Reinforced Cement Concrete Pipe Np3 As Per Drawing And Technical Specification Clause 1402.6 ( Removed From Existing Road Pipe) , Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 1106. , Removal Of Unsuitable Soil Including Excavation, Loading And Disposal Upto 1000 M Lead But Excluding Compaction Ground Supporting Embankment Subgrade Replacement By Suitable Soil, Which Shall Be Paid Separately As Per Clause 303.5.2 As Per Technical Specification Clause 302.3.11 , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Three Wheel 80-100 Kn Static Roller Capacity To Achieve The Desired Density, Complete As Per Technical Specification Clause 402 , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.25 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. , Construction Of Penetration Macadam Over Prepared Base By Providing A Layer Of Compacted Crushed Coarse Aggregate Using Chips Spreader With Alternate Applications Of Bituminous Binder And Key Aggregates And Rolling With A Three Wheel 80-100 Kn Static Roller To Achieve The Desired Degree Of Compaction As Per Technical Specification Clause 506. , Providing And Laying Bituminous Macadam With Hot Mix Plant Using Crushed Aggregates Of Grading As Per Table 500.4 Premixed With Bituminous Binder, Transported To Site Upto A Lead Of 1000 M Laid Over A Previously Prepared Surface With Paver Finisher To The Required Grade, Level And Alignment And Rolled To Achieve The Desired Compaction As Per Technical Specification Clause 504. , Bituminous Concrete:--Providing And Laying Bituminous Concrete Using Crushed Aggregate Of Grading 1, Premixed With Bituminous Binder @5.40% By Weight Of Total Mix And Filler, Transported At Site With Vts, Laid Over A Previously Prepared Surface, Finished To The Required Grade ,Level, Alignment, And Rolling To Achieve The Desired Density For 50Mm Compacted Thickness With Drum Mix Plant With Scada, Sensor Paver And Vibratory Roller Excluding Prime/Tack Coat Etc. Complete --Bitumen Of Specified Grade With Stone Dust Filler. (Vg-30 Bulk Bitumen Rates Are Considered To Arrive At Rates) , Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1. , Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media As Per Drawing And Technical Specifications Clause 1302 , Providing And Fixing Stream Lined M-20 Grade Reinforced Cement Concrete Guard Stone Including Mild Steel Bar Reinforcement Etc. Complete. , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. , Ordinary Rock (Not Requiring Blasting) , Providing Concrete For Plain/Reinforced Concrete M-15 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-25 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Plain/Reinforced Cement Concrete M-25 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202 , Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 , Road Marking With Hot Applied Thermoplastic Compound With Reflectorizing Glass Beads On Bituminous Surface- Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorizing Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. Complete , Providing And Fixing Of Typical Pmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1 , Supplying And Fixing Of Molded Shank Raised Pavement Markers / Cats Eye Made Of Polycarbonate And Abs Moulded Body And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw/Nh/33023/10-97 Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 102 +/- 2 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 +/- 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (Of Diameter Not Less Than 19 +/- 2 Mm And Height Not Less Than 30+/- 2 Mm) From The Body Is To Be A Minimum Value Of 500 Kg. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer.The Contractor Shall Submit A Two Year Warranty For Satisfactory Field Performance Including Stipulated Retro-Reflectance Of The Reflecting Panel, To The Engineer. , Road Delineators: Supplying And Installation Of Delineators (Roadway Indicators, Hazard Markers, Object Markers) 80 To 100 Cm High Above Ground Level, Painted Black And White In 15 Cm Wide Strips, Fitted With 80X100mm Rectangular Or 75Mm Dia. Circular Reflectorised Panels At The Top, Buried Or Pressed Into The Ground And Confirming To I.R.C. 79 And The Drawings , Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing And Erecting A W Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Metal Beam Rail, 70 Cm Above Road/Ground Level, Fixed On Ismc Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High, 1.1 M Below Ground/Road Level, All Steel Parts And Fitments To Be Galvanised By Hot Dip Process, All Fittings To Conform To Is:1367 And Is:1364, Metal Beam Rail To Be Fixed On The Vertical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810) , Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message,Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701, Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message, Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701 , Providing And Fixing 90Cmx60cm Granite Plate Engraving 10Cm. Height Letter, Figures Including Painting The Lefters/Figures With Approved Colour And Shade Complete , 3)Construction Of Bridge On Satewadi To Kalemala Road At Ch-1+700 , Tal.- Khatav _Dist. Satara . Package No.-Abd-(Ii)- Sat-Br-19Clearing Grass And Removal Of Rubbish Up To A Distance Of 30 M Outside The Periphery Of The Area As Per Technical Specification Clause 201. , Cost Of Utility Shifting & Rising , Dismantling Of Cement Concrete Pavement By Mechanical Meansusing Pneumatic Tools,Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto Alead Of 1000 Metres,Stacking Serviceable And Unserviceable Materials Separately Etc. Complete. , Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 M As Per Technical Specification Clause 202. , Removingnp-2Andnp-3 Class Pipes Including Stacking At Road Side As Directed By The Engineer In Charge. Upto 900Mm Dia And Above. Etc Complete , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. , Dewatering On Bhp Basis By Using Water Pump Including Diversion Of Stream, Providing Cofferdams, Earthern Bunds Etc. As May Be Necessary For Foundation And Other Parts Of The The Works And Pumping Out Water During And After Excavation As May Be Required By Using 5.0 To 9.0 Bhp Pump Etc. Complete. (Prior Approval Of Superintending Engineer Will Be Necessary) , Fillling In Foundation Trenches As Per Drawing And Technical Specification Clause 305.3.9 , Providing Concrete For Plain/Reinforced Concrete M-15 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-25 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Supplying, Fitting And Placing Hysd Bar Reinforcement In Foundation Complete As Per Drawings And Technical Specifications Clauses 1000 And 1202 , Plain/Reinforced Cement Concrete M-30 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Plain/Reinforced Cement Concrete M-25 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Technical Specification Clause 1204.3.8 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Technical Specification Clause 1204.3.8 , Providing And Laying 0.90 Meter Thick Metal Mat Consisting Of Rubble, Oversize Metal And Normal Size Metal In Specified Thickness As Per Detailed Drawing Including Supplying All Materials, Hand Packing Of Rubble, Spreading Metal In Layers And Hard Murum Including Watering And Compaction With Power Roller Etc. Complete. , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Providing Pressure Relief Pipes 100 Mm Dia In Bottom Slab Of Box Cell On A Filter Media Base Of 500 Mm X 500 Mm As Per Drawing And Technical Specification Clause 1205.5.7 , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Technical Specifications Clauses 800, 1205.4 And 1205.5 , Supplying, Fitting, And Placing Hysd Bar Reinforcement In Superstructure Complete As Per Drawing And Technical Specifications Clauses 1002, 1010 And 1202 , Drainage Spouts Complete As Per Drawing And Technical Specifications Clause 1209 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Technical Specifications , Providing Expansion Joints With 25Mm Thick Bituminous Pad As Per Detailed Drawings Etc. Complete. , Providing And Laying Cement Concrete Wearing Course M 30 Grade Including Reinforcement Complete As Per Drawing And Technical Specifications Clauses 800 And 1206.3 , Providing And Fixing In Position Pipe Railing Consisting Of Is Rolled Steel Joist Posts Designation Is Mb 100 (100X75) At 2.5 M Interval And Three Rows Of 50 Mm Dia Steel Pipes (Light) Including Fixing In Position On Bridge Deck Complete As Per Drawing And Technical Specifications Clause 1208.2 , Painting Two Coats Including Primer Coat After Filling The Surface With Synthetic Enamel Paint In All Shades On New, Plastered / Concrete Surfaces As Per Drawing And Technical Specification Clause 1701 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Laying Reinforced Cement Concrete Pipe Np3 As Per Drawing And Technical Specification Clause 1402.6 ( Removed From Existing Road Pipe) , Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 1106. , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Three Wheel 80-100 Kn Static Roller Capacity To Achieve The Desired Density, Complete As Per Technical Specification Clause 402 , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.25 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. , Construction Of Penetration Macadam Over Prepared Base By Providing A Layer Of Compacted Crushed Coarse Aggregate Using Chips Spreader With Alternate Applications Of Bituminous Binder And Key Aggregates And Rolling With A Three Wheel 80-100 Kn Static Roller To Achieve The Desired Degree Of Compaction As Per Technical Specification Clause 506. , Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type A Or Type B Or Type C As Per Technical Specification Clause 508. , Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type A, Type B And Type C As Per Technical Specification Clause 510 , Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1. , Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media As Per Drawing And Technical Specifications Clause 1302 , Providing And Fixing Stream Lined M-20 Grade Reinforced Cement Concrete Guard Stone Including Mild Steel Bar Reinforcement Etc. Complete. , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. , Ordinary Rock (Not Requiring Blasting) , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-25 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Plain/Reinforced Cement Concrete M-25 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202 , Providing And Laying Boulder Apron For Bed Protection With Stone Boulders Of Minimum Size And Weight As Per Table 1300.1, No Fragment Weighing Less Than 25 Kg Laid Dry Complete As Per Drawing And Technical Specifications Clause 1301 , Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 , Road Marking With Hot Applied Thermoplastic Compound With Reflectorizing Glass Beads On Bituminous Surface- Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorizing Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. Complete , Providing And Fixing Of Typical Pmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1 , Supplying And Fixing Of Molded Shank Raised Pavement Markers / Cats Eye Made Of Polycarbonate And Abs Moulded Body And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw/Nh/33023/10-97 Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 102 +/- 2 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 +/- 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (Of Diameter Not Less Than 19 +/- 2 Mm And Height Not Less Than 30+/- 2 Mm) From The Body Is To Be A Minimum Value Of 500 Kg. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer.The Contractor Shall Submit A Two Year Warranty For Satisfactory Field Performance Including Stipulated Retro-Reflectance Of The Reflecting Panel, To The Engineer. , Road Delineators: Supplying And Installation Of Delineators (Roadway Indicators, Hazard Markers, Object Markers) 80 To 100 Cm High Above Ground Level, Painted Black And White In 15 Cm Wide Strips, Fitted With 80X100mm Rectangular Or 75Mm Dia. Circular Reflectorised Panels At The Top, Buried Or Pressed Into The Ground And Confirming To I.R.C. 79 And The Drawings , Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing And Erecting A W Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Metal Beam Rail, 70 Cm Above Road/Ground Level, Fixed On Ismc Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High, 1.1 M Below Ground/Road Level, All Steel Parts And Fitments To Be Galvanised By Hot Dip Process, All Fittings To Conform To Is:1367 And Is:1364, Metal Beam Rail To Be Fixed On The Vertical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810) , Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message,Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701, Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message, Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701 , Providing And Fixing 90Cmx60cm Granite Plate Engraving 10Cm. Height Letter, Figures Including Painting The Lefters/Figures With Approved Colour And Shade Complete , 4)Construction Of Bridge On Waduj To Hingane Road At Ch-4+300 , Tal.- Khatav _Dist. Satara Clearing Grass And Removal Of Rubbish Up To A Distance Of 30 M Outside The Periphery Of The Area As Per Technical Specification Clause 201. , Cost Of Utility Shifting & Rising , Dismantling Of Cement Concrete Pavement By Mechanical Meansusing Pneumatic Tools,Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto Alead Of 1000 Metres,Stacking Serviceable And Unserviceable Materials Separately Etc. Complete. , Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 M As Per Technical Specification Clause 202. , Removingnp-2Andnp-3 Class Pipes Including Stacking At Road Side As Directed By The Engineer In Charge. Upto 900Mm Dia And Above. Etc Complete , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ordinary Soil , Dewatering On Bhp Basis By Using Water Pump Including Diversion Of Stream, Providing Cofferdams, Earthern Bunds Etc. As May Be Necessary For Foundation And Other Parts Of The The Works And Pumping Out Water During And After Excavation As May Be Required By Using 5.0 To 9.0 Bhp Pump Etc. Complete. (Prior Approval Of Superintending Engineer Will Be Necessary) , Providing Concrete For Plain/Reinforced Concrete M-15 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-30 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-25 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Supplying, Fitting And Placing Hysd Bar Reinforcement In Foundation Complete As Per Drawings And Technical Specifications Clauses 1000 And 1202 , Fillling In Foundation Trenches As Per Drawing And Technical Specification Clause 305.3.9 , Providing Pressure Relief Pipes 100 Mm Dia In Bottom Slab Of Box Cell On A Filter Media Base Of 500 Mm X 500 Mm As Per Drawing And Technical Specification Clause 1205.5.7 , Plain/Reinforced Cement Concrete M-30 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Plain/Reinforced Cement Concrete M-25 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Technical Specification Clause 1204.3.8 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Technical Specification Clause 1204.3.8 , Providing And Laying 0.90 Meter Thick Metal Mat Consisting Of Rubble, Oversize Metal And Normal Size Metal In Specified Thickness As Per Detailed Drawing Including Supplying All Materials, Hand Packing Of Rubble, Spreading Metal In Layers And Hard Murum Including Watering And Compaction With Power Roller Etc. Complete. , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Technical Specifications Clauses 800, 1205.4 And 1205.5 , Supplying, Fitting, And Placing Hysd Bar Reinforcement In Superstructure Complete As Per Drawing And Technical Specifications Clauses 1002, 1010 And 1202 , Drainage Spouts Complete As Per Drawing And Technical Specifications Clause 1209 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Technical Specifications , Providing Expansion Joints With 25Mm Thick Bituminous Pad As Per Detailed Drawings Etc. Complete. , Providing And Laying Cement Concrete Wearing Course M 30 Grade Including Reinforcement Complete As Per Drawing And Technical Specifications Clauses 800 And 1206.3 , Providing And Fixing In Position Pipe Railing Consisting Of Is Rolled Steel Joist Posts Designation Is Mb 100 (100X75) At 2.5 M Interval And Three Rows Of 50 Mm Dia Steel Pipes (Light) Including Fixing In Position On Bridge Deck Complete As Per Drawing And Technical Specifications Clause 1208. , Painting Two Coats Including Primer Coat After Filling The Surface With Synthetic Enamel Paint In All Shades On New, Plastered / Concrete Surfaces As Per Drawing And Technical Specification Clause 1701 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Laying Reinforced Cement Concrete Pipe Np3 As Per Drawing And Technical Specification Clause 1402.6 ( Removed From Existing Road Pipe) , Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 1106. , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Three Wheel 80-100 Kn Static Roller Capacity To Achieve The Desired Density, Complete As Per Technical Specification Clause 402 , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.25 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. , Construction Of Penetration Macadam Over Prepared Base By Providing A Layer Of Compacted Crushed Coarse Aggregate Using Chips Spreader With Alternate Applications Of Bituminous Binder And Key Aggregates And Rolling With A Three Wheel 80-100 Kn Static Roller To Achieve The Desired Degree Of Compaction As Per Technical Specification Clause 506. , Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type A Or Type B Or Type C As Per Technical Specification Clause 508. , Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type A, Type B And Type C As Per Technical Specification Clause 510 , Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1. , Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media As Per Drawing And Technical Specifications Clause 1302 , Providing And Fixing Stream Lined M-20 Grade Reinforced Cement Concrete Guard Stone Including Mild Steel Bar Reinforcement Etc. Complete. , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. , Ordinary Rock (Not Requiring Blasting) , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-25 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 120325 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Providing And Laying Boulder Apron For Bed Protection With Stone Boulders Of Minimum Size And Weight As Per Table 1300.1, No Fragment Weighing Less Than 25 Kg Laid Dry Complete As Per Drawing And Technical Specifications Clause 1301 , Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 , Road Marking With Hot Applied Thermoplastic Compound With Reflectorizing Glass Beads On Bituminous Surface- Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorizing Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. Complete , Providing And Fixing Of Typical Pmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1 , Supplying And Fixing Of Molded Shank Raised Pavement Markers / Cats Eye Made Of Polycarbonate And Abs Moulded Body And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw/Nh/33023/10-97 Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 102 +/- 2 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 +/- 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (Of Diameter Not Less Than 19 +/- 2 Mm And Height Not Less Than 30+/- 2 Mm) From The Body Is To Be A Minimum Value Of 500 Kg. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer.The Contractor Shall Submit A Two Year Warranty For Satisfactory Field Performance Including Stipulated Retro-Reflectance Of The Reflecting Panel, To The Engineer. , Road Delineators: Supplying And Installation Of Delineators (Roadway Indicators, Hazard Markers, Object Markers) 80 To 100 Cm High Above Ground Level, Painted Black And White In 15 Cm Wide Strips, Fitted With 80X100mm Rectangular Or 75Mm Dia. Circular Reflectorised Panels At The Top, Buried Or Pressed Into The Ground And Confirming To I.R.C. 79 And The Drawings , Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing And Erecting A W Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Metal Beam Rail, 70 Cm Above Road/Ground Level, Fixed On Ismc Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High, 1.1 M Below Ground/Road Level, All Steel Parts And Fitments To Be Galvanised By Hot Dip Process, All Fittings To Conform To Is:1367 And Is:1364, Metal Beam Rail To Be Fixed On The Vertical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810) , Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message,Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701, Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message, Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701 , Providing And Fixing 90Cmx60cm Granite Plate Engraving 10Cm. Height Letter, Figures Including Painting The Lefters/Figures With Approved Colour And Shade Complete , 5)Construction Of Submersible Bridge On Nalla At Waduj To Wakeshwar Road At Km- 1+420 , Tal.- Khatav_Dist. Satara . Clearing Grass And Removal Of Rubbish Up To A Distance Of 30 M Outside The Periphery Of The Area As Per Technical Specification Clause 201. , Cost Of Utility Shifting & Rising , Dismantling Of Flexible Pavements And Disposal Of Dismantled Materials Upto A Lead Of 100 M, Stacking Serviceable And Unserviceable Materials Separately As Per Technical Specification Clause 202 , Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 M As Per Technical Specification Clause 202. , Removingnp-2Andnp-3 Class Pipes Including Stacking At Road Side As Directed By The Engineer In Charge. Upto 900Mm Dia And Above. Etc Complete , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. , Dewatering On Bhp Basis By Using Water Pump Including Diversion Of Stream, Providing Cofferdams, Earthern Bunds Etc. As May Be Necessary For Foundation And Other Parts Of The The Works And Pumping Out Water During And After Excavation As May Be Required By Using 5.0 To 9.0 Bhp Pump Etc. Complete. (Prior Approval Of Superintending Engineer Will Be Necessary) , Fillling In Foundation Trenches As Per Drawing And Technical Specification Clause 305.3.9 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-30 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Supplying, Fitting And Placing Hysd Bar Reinforcement In Foundation Complete As Per Drawings And Technical Specifications Clauses 1000 And 1202 , Providing Pressure Relief Pipes 100 Mm Dia In Bottom Slab Of Box Cell On A Filter Media Base Of 500 Mm X 500 Mm As Per Drawing And Technical Specification Clause 1205.5.7 , Plain/Reinforced Cement Concrete M-30 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Plain/Reinforced Cement Concrete M-25 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Technical Specification Clause 1204.3.8 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Technical Specification Clause 1204.3.8 , Providing And Laying 0.90 Meter Thick Metal Mat Consisting Of Rubble, Oversize Metal And Normal Size Metal In Specified Thickness As Per Detailed Drawing Including Supplying All Materials, Hand Packing Of Rubble, Spreading Metal In Layers And Hard Murum Including Watering And Compaction With Power Roller Etc. Complete. , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Technical Specifications Clauses 800, 1205.4 And 1205.5 , Supplying, Fitting, And Placing Hysd Bar Reinforcement In Superstructure Complete As Per Drawing And Technical Specifications Clauses 1002, 1010 And 1202 , Drainage Spouts Complete As Per Drawing And Technical Specifications Clause 1209 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Technical Specifications , Providing Expansion Joints With 25Mm Thick Bituminous Pad As Per Detailed Drawings Etc. Complete. , Providing And Laying Cement Concrete Wearing Course M 30 Grade Including Reinforcement Complete As Per Drawing And Technical Specifications Clauses 800 And 1206.3 , Providing And Fixing In Position Pipe Railing Consisting Of Is Rolled Steel Joist Posts Designation Is Mb 100 (100X75) At 2.5 M Interval And Three Rows Of 50 Mm Dia Steel Pipes (Light) Including Fixing In Position On Bridge Deck Complete As Per Drawing And Technical Specifications Clause 1208.2 , Painting Two Coats Including Primer Coat After Filling The Surface With Synthetic Enamel Paint In All Shades On New, Plastered / Concrete Surfaces As Per Drawing And Technical Specification Clause 1701 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Laying Reinforced Cement Concrete Pipe Np3 As Per Drawing And Technical Specification Clause 1402.6 ( Removed From Existing Road Pipe) , Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 1106. , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Three Wheel 80-100 Kn Static Roller Capacity To Achieve The Desired Density, Complete As Per Technical Specification Clause 402 , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.25 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. , Construction Of Penetration Macadam Over Prepared Base By Providing A Layer Of Compacted Crushed Coarse Aggregate Using Chips Spreader With Alternate Applications Of Bituminous Binder And Key Aggregates And Rolling With A Three Wheel 80-100 Kn Static Roller To Achieve The Desired Degree Of Compaction As Per Technical Specification Clause 506. , Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type A Or Type B Or Type C As Per Technical Specification Clause 508. , Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type A, Type B And Type C As Per Technical Specification Clause 510 , Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1. , Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media As Per Drawing And Technical Specifications Clause 1302 , Providing And Fixing Stream Lined M-20 Grade Reinforced Cement Concrete Guard Stone Including Mild Steel Bar Reinforcement Etc. Complete. , Providing And Laying Boulder Apron For Bed Protection With Stone Boulders Of Minimum Size And Weight As Per Table 1300.1, No Fragment Weighing Less Than 25 Kg Laid Dry Complete As Per Drawing And Technical Specifications Clause 1301 , Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 , Road Marking With Hot Applied Thermoplastic Compound With Reflectorizing Glass Beads On Bituminous Surface- Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorizing Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. Complete , Providing And Fixing Of Typical Pmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1 , Supplying And Fixing Of Molded Shank Raised Pavement Markers / Cats Eye Made Of Polycarbonate And Abs Moulded Body And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw/Nh/33023/10-97 Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 102 +/- 2 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 +/- 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (Of Diameter Not Less Than 19 +/- 2 Mm And Height Not Less Than 30+/- 2 Mm) From The Body Is To Be A Minimum Value Of 500 Kg. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer.The Contractor Shall Submit A Two Year Warranty For Satisfactory Field Performance Including Stipulated Retro-Reflectance Of The Reflecting Panel, To The Engineer. , Road Delineators: Supplying And Installation Of Delineators (Roadway Indicators, Hazard Markers, Object Markers) 80 To 100 Cm High Above Ground Level, Painted Black And White In 15 Cm Wide Strips, Fitted With 80X100mm Rectangular Or 75Mm Dia. Circular Reflectorised Panels At The Top, Buried Or Pressed Into The Ground And Confirming To I.R.C. 79 And The Drawings , Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing And Erecting A W Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Metal Beam Rail, 70 Cm Above Road/Ground Level, Fixed On Ismc Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High, 1.1 M Below Ground/Road Level, All Steel Parts And Fitments To Be Galvanised By Hot Dip Process, All Fittings To Conform To Is:1367 And Is:1364, Metal Beam Rail To Be Fixed On The Vertical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810) , Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message,Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701, Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message, Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701 , Providing And Fixing 90Cmx60cm Granite Plate Engraving 10Cm. Height Letter, Figures Including Painting The Lefters/Figures With Approved Colour And Shade Complete , 6)Construction Of Bridge On Waduj To Wakeshwar Road At Ch- 1+700 , Tal.- Khatav _Dist. Satara . Clearing Grass And Removal Of Rubbish Up To A Distance Of 30 M Outside The Periphery Of The Area As Per Technical Specification Clause 201. , Cost Of Utility Shifting & Rising , Dismantling Of Flexible Pavements And Disposal Of Dismantled Materials Upto A Lead Of 100 M, Stacking Serviceable And Unserviceable Materials Separately As Per Technical Specification Clause 202 , Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 M As Per Technical Specification Clause 202. , Removingnp-2Andnp-3 Class Pipes Including Stacking At Road Side As Directed By The Engineer In Charge. Upto 900Mm Dia And Above. Etc Complete , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. , Dewatering On Bhp Basis By Using Water Pump Including Diversion Of Stream, Providing Cofferdams, Earthern Bunds Etc. As May Be Necessary For Foundation And Other Parts Of The The Works And Pumping Out Water During And After Excavation As May Be Required By Using 5.0 To 9.0 Bhp Pump Etc. Complete. (Prior Approval Of Superintending Engineer Will Be Necessary) , Fillling In Foundation Trenches As Per Drawing And Technical Specification Clause 305.3.9 , Providing Concrete For Plain/Reinforced Concrete M-15 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-25 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-30 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Supplying, Fitting And Placing Hysd Bar Reinforcement In Foundation Complete As Per Drawings And Technical Specifications Clauses 1000 And 1202 , Providing Pressure Relief Pipes 100 Mm Dia In Bottom Slab Of Box Cell On A Filter Media Base Of 500 Mm X 500 Mm As Per Drawing And Technical Specification Clause 1205.5.7 , Plain/Reinforced Cement Concrete M-30 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Plain/Reinforced Cement Concrete M-25 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Technical Specification Clause 1204.3.8 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Technical Specification Clause 1204.3.8 , Providing And Laying 0.90 Meter Thick Metal Mat Consisting Of Rubble, Oversize Metal And Normal Size Metal In Specified Thickness As Per Detailed Drawing Including Supplying All Materials, Hand Packing Of Rubble, Spreading Metal In Layers And Hard Murum Including Watering And Compaction With Power Roller Etc. Complete. , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Providing And Laying Reinforced Cement Concrete M-30 In Superstructure As Per Drawing And Technical Specifications Clauses 800, 1205.4 And 1205.5 , Supplying, Fitting, And Placing Hysd Bar Reinforcement In Superstructure Complete As Per Drawing And Technical Specifications Clauses 1002, 1010 And 1202 , Drainage Spouts Complete As Per Drawing And Technical Specifications Clause 1209 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Technical Specifications , Providing Expansion Joints With 25Mm Thick Bituminous Pad As Per Detailed Drawings Etc. Complete. , Providing And Laying Cement Concrete Wearing Course M 30 Grade Including Reinforcement Complete As Per Drawing And Technical Specifications Clauses 800 And 1206.3 , Providing And Fixing In Position Pipe Railing Consisting Of Is Rolled Steel Joist Posts Designation Is Mb 100 (100X75) At 2.5 M Interval And Three Rows Of 50 Mm Dia Steel Pipes (Light) Including Fixing In Position On Bridge Deck Complete As Per Drawing And Technical Specifications Clause 1208.2 , Painting Two Coats Including Primer Coat After Filling The Surface With Synthetic Enamel Paint In All Shades On New, Plastered / Concrete Surfaces As Per Drawing And Technical Specification Clause 1701 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 1106. , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Three Wheel 80-100 Kn Static Roller Capacity To Achieve The Desired Density, Complete As Per Technical Specification Clause 402 , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.25 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. , Construction Of Penetration Macadam Over Prepared Base By Providing A Layer Of Compacted Crushed Coarse Aggregate Using Chips Spreader With Alternate Applications Of Bituminous Binder And Key Aggregates And Rolling With A Three Wheel 80-100 Kn Static Roller To Achieve The Desired Degree Of Compaction As Per Technical Specification Clause 506. , Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type A Or Type B Or Type C As Per Technical Specification Clause 508. , Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type A, Type B And Type C As Per Technical Specification Clause 510 , Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1. , Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media As Per Drawing And Technical Specifications Clause 1302 , Providing And Fixing Stream Lined M-20 Grade Reinforced Cement Concrete Guard Stone Including Mild Steel Bar Reinforcement Etc. Complete. , Providing And Laying Boulder Apron For Bed Protection With Stone Boulders Of Minimum Size And Weight As Per Table 1300.1, No Fragment Weighing Less Than 25 Kg Laid Dry Complete As Per Drawing And Technical Specifications Clause 1301 , Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 , Road Marking With Hot Applied Thermoplastic Compound With Reflectorizing Glass Beads On Bituminous Surface- Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorizing Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. Complete , Providing And Fixing Of Typical Pmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1 , Supplying And Fixing Of Molded Shank Raised Pavement Markers / Cats Eye Made Of Polycarbonate And Abs Moulded Body And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw/Nh/33023/10-97 Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 102 +/- 2 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 +/- 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (Of Diameter Not Less Than 19 +/- 2 Mm And Height Not Less Than 30+/- 2 Mm) From The Body Is To Be A Minimum Value Of 500 Kg. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer.The Contractor Shall Submit A Two Year Warranty For Satisfactory Field Performance Including Stipulated Retro-Reflectance Of The Reflecting Panel, To The Engineer. , Road Delineators: Supplying And Installation Of Delineators (Roadway Indicators, Hazard Markers, Object Markers) 80 To 100 Cm High Above Ground Level, Painted Black And White In 15 Cm Wide Strips, Fitted With 80X100mm Rectangular Or 75Mm Dia. Circular Reflectorised Panels At The Top, Buried Or Pressed Into The Ground And Confirming To I.R.C. 79 And The Drawings , Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing And Erecting A W Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Metal Beam Rail, 70 Cm Above Road/Ground Level, Fixed On Ismc Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High, 1.1 M Below Ground/Road Level, All Steel Parts And Fitments To Be Galvanised By Hot Dip Process, All Fittings To Conform To Is:1367 And Is:1364, Metal Beam Rail To Be Fixed On The Vertical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810) , Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message,Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701, Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message, Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701 , Providing And Fixing 90Cmx60cm Granite Plate Engraving 10Cm. Height Letter, Figures Including Painting The Lefters/Figures With Approved Colour And Shade Complete , 7)Construction Of Bridge On Waduj To Wakeshwar Road At Ch- 2-150 , Tal.- Khatav _Dist. Sataraclearing Grass And Removal Of Rubbish Up To A Distance Of 30 M Outside The Periphery Of The Area As Per Technical Specification Clause 201. , Cost Of Utility Shifting & Rising , Dismantling Of Flexible Pavements And Disposal Of Dismantled Materials Upto A Lead Of 100 M, Stacking Serviceable And Unserviceable Materials Separately As Per Technical Specification Clause 202 , Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 M As Per Technical Specification Clause 202. , Removingnp-2Andnp-3 Class Pipes Including Stacking At Road Side As Directed By The Engineer In Charge. Upto 900Mm Dia And Above. Etc Complete , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. , Dewatering On Bhp Basis By Using Water Pump Including Diversion Of Stream, Providing Cofferdams, Earthern Bunds Etc. As May Be Necessary For Foundation And Other Parts Of The The Works And Pumping Out Water During And After Excavation As May Be Required By Using 5.0 To 9.0 Bhp Pump Etc. Complete. (Prior Approval Of Superintending Engineer Will Be Necessary) , Fillling In Foundation Trenches As Per Drawing And Technical Specification Clause 305.3.9 , Providing Concrete For Plain/Reinforced Concrete M-15 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-25 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-30 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Supplying, Fitting And Placing Hysd Bar Reinforcement In Foundation Complete As Per Drawings And Technical Specifications Clauses 1000 And 1202 , Providing Pressure Relief Pipes 100 Mm Dia In Bottom Slab Of Box Cell On A Filter Media Base Of 500 Mm X 500 Mm As Per Drawing And Technical Specification Clause 1205.5.7 , Plain/Reinforced Cement Concrete M-30 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Plain/Reinforced Cement Concrete M-25In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Technical Specification Clause 1204.3.8 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Technical Specification Clause 1204.3.8 , Providing And Laying 0.90 Meter Thick Metal Mat Consisting Of Rubble, Oversize Metal And Normal Size Metal In Specified Thickness As Per Detailed Drawing Including Supplying All Materials, Hand Packing Of Rubble, Spreading Metal In Layers And Hard Murum Including Watering And Compaction With Power Roller Etc. Complete. , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Providing And Laying Reinforced Cement Concrete M-30 In Superstructure As Per Drawing And Technical Specifications Clauses 800, 1205.4 And 1205.5 , Supplying, Fitting, And Placing Hysd Bar Reinforcement In Superstructure Complete As Per Drawing And Technical Specifications Clauses 1002, 1010 And 1202 , Drainage Spouts Complete As Per Drawing And Technical Specifications Clause 1209 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Technical Specifications , Providing Expansion Joints With 25Mm Thick Bituminous Pad As Per Detailed Drawings Etc. Complete. , Providing And Laying Cement Concrete Wearing Course M 30 Grade Including Reinforcement Complete As Per Drawing And Technical Specifications Clauses 800 And 1206.3 , Providing And Fixing In Position Pipe Railing Consisting Of Is Rolled Steel Joist Posts Designation Is Mb 100 (100X75) At 2.5 M Interval And Three Rows Of 50 Mm Dia Steel Pipes (Light) Including Fixing In Position On Bridge Deck Complete As Per Drawing And Technical Specifications Clause 1208.2 , Painting Two Coats Including Primer Coat After Filling The Surface With Synthetic Enamel Paint In All Shades On New, Plastered / Concrete Surfaces As Per Drawing And Technical Specification Clause 1701 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Laying Reinforced Cement Concrete Pipe Np3 As Per Drawing And Technical Specification Clause 1402.6 ( Removed From Existing Road Pipe) , Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 1106. , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Three Wheel 80-100 Kn Static Roller Capacity To Achieve The Desired Density, Complete As Per Technical Specification Clause 402 , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.25 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. , Construction Of Penetration Macadam Over Prepared Base By Providing A Layer Of Compacted Crushed Coarse Aggregate Using Chips Spreader With Alternate Applications Of Bituminous Binder And Key Aggregates And Rolling With A Three Wheel 80-100 Kn Static Roller To Achieve The Desired Degree Of Compaction As Per Technical Specification Clause 506. , Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type A Or Type B Or Type C As Per Technical Specification Clause 508. , Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type A, Type B And Type C As Per Technical Specification Clause 510 , Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1. , Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media As Per Drawing And Technical Specifications Clause 1302 , Providing And Fixing Stream Lined M-20 Grade Reinforced Cement Concrete Guard Stone Including Mild Steel Bar Reinforcement Etc. Complete. , Providing And Laying Boulder Apron For Bed Protection With Stone Boulders Of Minimum Size And Weight As Per Table 1300.1, No Fragment Weighing Less Than 25 Kg Laid Dry Complete As Per Drawing And Technical Specifications Clause 1301 , Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 , Road Marking With Hot Applied Thermoplastic Compound With Reflectorizing Glass Beads On Bituminous Surface- Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorizing Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. Complete , Providing And Fixing Of Typical Pmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1 , Supplying And Fixing Of Molded Shank Raised Pavement Markers / Cats Eye Made Of Polycarbonate And Abs Moulded Body And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw/Nh/33023/10-97 Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 102 +/- 2 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 +/- 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (Of Diameter Not Less Than 19 +/- 2 Mm And Height Not Less Than 30+/- 2 Mm) From The Body Is To Be A Minimum Value Of 500 Kg. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer.The Contractor Shall Submit A Two Year Warranty For Satisfactory Field Performance Including Stipulated Retro-Reflectance Of The Reflecting Panel, To The Engineer. , Road Delineators: Supplying And Installation Of Delineators (Roadway Indicators, Hazard Markers, Object Markers) 80 To 100 Cm High Above Ground Level, Painted Black And White In 15 Cm Wide Strips, Fitted With 80X100mm Rectangular Or 75Mm Dia. Circular Reflectorised Panels At The Top, Buried Or Pressed Into The Ground And Confirming To I.R.C. 79 And The Drawings , Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing And Erecting A W Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Metal Beam Rail, 70 Cm Above Road/Ground Level, Fixed On Ismc Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High, 1.1 M Below Ground/Road Level, All Steel Parts And Fitments To Be Galvanised By Hot Dip Process, All Fittings To Conform To Is:1367 And Is:1364, Metal Beam Rail To Be Fixed On The Vertical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810) , Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message,Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701, Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message, Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701 , Providing And Fixing 90Cmx60cm Granite Plate Engraving 10Cm. Height Letter, Figures Including Painting The Lefters/Figures With Approved Colour And Shade Complete , 8)Construction Of Bridge On Waduj To Wakeshwar Road At Ch-3+300 , Tal.- Khatav _Dist. Satara. Clearing Grass And Removal Of Rubbish Up To A Distance Of 30 M Outside The Periphery Of The Area As Per Technical Specification Clause 201. , Cost Of Utility Shifting & Rising , Dismantling Of Cement Concrete Pavement By Mechanical Meansusing Pneumatic Tools,Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto Alead Of 1000 Metres,Stacking Serviceable And Unserviceable Materials Separately Etc. Complete. , Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 M As Per Technical Specification Clause 202. , Removingnp-2Andnp-3 Class Pipes Including Stacking At Road Side As Directed By The Engineer In Charge. Upto 900Mm Dia And Above. Etc Complete , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ordinary Soil , Dewatering On Bhp Basis By Using Water Pump Including Diversion Of Stream, Providing Cofferdams, Earthern Bunds Etc. As May Be Necessary For Foundation And Other Parts Of The The Works And Pumping Out Water During And After Excavation As May Be Required By Using 5.0 To 9.0 Bhp Pump Etc. Complete. (Prior Approval Of Superintending Engineer Will Be Necessary) , Providing Concrete For Plain/Reinforced Concrete M-15 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-30 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Providing Concrete For Plain/Reinforced Concrete M-25 In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Supplying, Fitting And Placing Hysd Bar Reinforcement In Foundation Complete As Per Drawings And Technical Specifications Clauses 1000 And 1202 , Fillling In Foundation Trenches As Per Drawing And Technical Specification Clause 305.3.9 , Providing Pressure Relief Pipes 100 Mm Dia In Bottom Slab Of Box Cell On A Filter Media Base Of 500 Mm X 500 Mm As Per Drawing And Technical Specification Clause 1205.5.7 , Plain/Reinforced Cement Concrete M-30 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Plain/Reinforced Cement Concrete M-25 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Technical Specification Clause 1204.3.8 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Technical Specification Clause 1204.3.8 , Providing And Laying 0.90 Meter Thick Metal Mat Consisting Of Rubble, Oversize Metal And Normal Size Metal In Specified Thickness As Per Detailed Drawing Including Supplying All Materials, Hand Packing Of Rubble, Spreading Metal In Layers And Hard Murum Including Watering And Compaction With Power Roller Etc. Complete. , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Technical Specifications Clauses 800, 1205.4 And 1205.5 , Supplying, Fitting, And Placing Hysd Bar Reinforcement In Superstructure Complete As Per Drawing And Technical Specifications Clauses 1002, 1010 And 1202 , Drainage Spouts Complete As Per Drawing And Technical Specifications Clause 1209 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Technical Specifications Clauses 800 And 1211 , Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Technical Specifications , Providing Expansion Joints With 25Mm Thick Bituminous Pad As Per Detailed Drawings Etc. Complete. , Providing And Laying Cement Concrete Wearing Course M 30 Grade Including Reinforcement Complete As Per Drawing And Technical Specifications Clauses 800 And 1206.3 , Providing And Fixing In Position Pipe Railing Consisting Of Is Rolled Steel Joist Posts Designation Is Mb 100 (100X75) At 2.5 M Interval And Three Rows Of 50 Mm Dia Steel Pipes (Light) Including Fixing In Position On Bridge Deck Complete As Per Drawing And Technical Specifications Clause 1208. , Painting Two Coats Including Primer Coat After Filling The Surface With Synthetic Enamel Paint In All Shades On New, Plastered / Concrete Surfaces As Per Drawing And Technical Specification Clause 1701 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Laying Reinforced Cement Concrete Pipe Np3 As Per Drawing And Technical Specification Clause 1402.6 ( Removed From Existing Road Pipe) , Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 1106. , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Three Wheel 80-100 Kn Static Roller Capacity To Achieve The Desired Density, Complete As Per Technical Specification Clause 402 , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.25 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. , Construction Of Penetration Macadam Over Prepared Base By Providing A Layer Of Compacted Crushed Coarse Aggregate Using Chips Spreader With Alternate Applications Of Bituminous Binder And Key Aggregates And Rolling With A Three Wheel 80-100 Kn Static Roller To Achieve The Desired Degree Of Compaction As Per Technical Specification Clause 506. , Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type A Or Type B Or Type C As Per Technical Specification Clause 508. , Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type A, Type B And Type C As Per Technical Specification Clause 510 , Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1. , Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media As Per Drawing And Technical Specifications Clause 1302 , Providing And Fixing Stream Lined M-20 Grade Reinforced Cement Concrete Guard Stone Including Mild Steel Bar Reinforcement Etc. Complete. , Providing And Laying Boulder Apron For Bed Protection With Stone Boulders Of Minimum Size And Weight As Per Table 1300.1, No Fragment Weighing Less Than 25 Kg Laid Dry Complete As Per Drawing And Technical Specifications Clause 1301 , Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 , Road Marking With Hot Applied Thermoplastic Compound With Reflectorizing Glass Beads On Bituminous Surface- Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorizing Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. Complete , Providing And Fixing Of Typical Pmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1 , Supplying And Fixing Of Molded Shank Raised Pavement Markers / Cats Eye Made Of Polycarbonate And Abs Moulded Body And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw/Nh/33023/10-97 Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 102 +/- 2 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 +/- 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (Of Diameter Not Less Than 19 +/- 2 Mm And Height Not Less Than 30+/- 2 Mm) From The Body Is To Be A Minimum Value Of 500 Kg. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer.The Contractor Shall Submit A Two Year Warranty For Satisfactory Field Performance Including Stipulated Retro-Reflectance Of The Reflecting Panel, To The Engineer. , Road Delineators: Supplying And Installation Of Delineators (Roadway Indicators, Hazard Markers, Object Markers) 80 To 100 Cm High Above Ground Level, Painted Black And White In 15 Cm Wide Strips, Fitted With 80X100mm Rectangular Or 75Mm Dia. Circular Reflectorised Panels At The Top, Buried Or Pressed Into The Ground And Confirming To I.R.C. 79 And The Drawings , Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message,Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701, Providing And Erecting Direction And Place Identifications Of Semi Reflective Sign Boards As Per Irc:67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint In White Colour In Front And Grey Colour On Back With Red Reflective Border Of 70 Mm Width And Required Message, Letters, Figures With Reflective Engineering Grade Tape As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On 47 Mm X 47Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm M/S Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701 , Providing And Fixing 90Cmx60cm Granite Plate Engraving 10Cm. Height Letter, Figures Including Painting The Lefters/Figures With Approved Colour And Shade Complete

Contact Information