|
Supply And Fitting Of Kota Stone, And Miscellaneous Work On Ground Floor Of Library Deptt., English, Sociology And Defense Deptt. Of C.M.P. Degree College, Prayagraj As Per Tender Document--- 1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick 2 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 3 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 4 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm 6 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6 mm for diagonal braces and central cross piece 7 Providing and fixing ISI marked flush door shutters 35 mm thick including IS 8 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead 9 Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources) 10 Centering and shuttering including strutting, propping etc. and removalof form for Suspended floors, roofs, landings, balconies and accessplatform 11 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level of grade Fe-500D ormore. 12 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in superstructure above plinth level up to floorV level Cement mortar 1:4 (1 cement :4 coarse sand) 13 CEMENT PLASTER 15 mm cement plaster 1:6 (1 cement : 6 fine sand) 14 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement 15 Providing and fixing factory made P.V.C. door frame of size 50x47 mmwith a wall thickness of 5 mm, made out of extruded 5 mm rigid PVCfoam sheet, mitred at corners and joined with 2 Nos of 150 mm longbrackets of 15x15 mm M.S. square tube 16 Providing and fixing aluminium tower bolts, ISI marked, anodised 200x10 mm 17 Providing and fixing aluminium handles, ISI marked, anodised 125 mm 18 Providing and fixing aluminium sliding door bolts 250x16 mm 19 Providing and fixing Ist quality ceramic glazed wall tiles conforming to of approvedmake, in all colours, shades except burgundy, bottle green,in skirting, risers of steps anddados, over 12 mm thick bed of cement mortar 1:3 20 Providing and laying Ceramic glazed floor tiles of size 300x300 mm 21 Providing and fixing water closet squatting pan 22 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard patternWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 23 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 110 mm diameter 24 Providing and fixing(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. 25 Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 122 mm long, weighing not less than 99 gms 26 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms 27 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 28 Distempering with 1st quality acrylic distemper (ready mixed)Old work (one or more coats) 29 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4
|
