|
Tender for Construction & Commissioning Of Beri Type Single Phase At Near Joraram Gangaram Ki Dhani New Bhurtiya Under Dmft; 1 Earth work in excavation exclusively for openwells including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter. All kinds of soil. 2 Add extra over item No. 1 for every additional lift of 1.5 Mtr. or part thereof All kind of soil.1.50 Mtr. to 3.00 Mtr 3 3.00 Mtr. to 4.50 Mtr 4 4.50 Mtr. to 6.00 Mtr 5 6.00 Mtr. to 7.50 Mtr 6 7.50 Mtr. to 9.00 Mtr 7 9.00 Mtr. to 10.50 Mtr 8 10.50 Mtr. to 12.00 Mtr 9 12.00 Mtr. to 13.50 Mtr 10 13.50 Mtr. to 15.00 Mtr 11 Earth work in excavation exclusively for openwell including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposals of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available. Ordinary Rock 12 Add extra over item No. 3 for every additional lift of 1.5 Mtr. or part thereof in ordinay & hard Rock. 15.00 mtr. To 16.50 mtr. 13 16.50 mtr. To 18.00 mtr. 14 18.00 mtr. To 1950 mtr 15 19.50 mtr. To 21.00 mtr. 16 21.00 mtr. To 22.50 mtr. 17 22.50 mtr. To 25.50 mtr. 18 25.50 mtr. To 27.00 mtr. 19 27.00 mtr. To 28.50 mtr. 20 28.50 mtr. To 30.00 mtr. 21 Add 20% extra over item No. 2.35 for excavation in saturated soil where pumping or baling out of water is required, including shoring strutting where required and dewatering. 21.00 mtr. to 30.00 mtr 22 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding cost of centering shuttering and reinforcement : 1:2:4 (1-Cement:2-coarse sand:4-graded stone aggregate 20 mm nominal size). 23 Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for: Walls (any thickness) including attached pilasters, buttresses, plinth and string course. 24 Providing and fabricating steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. All steel shall be procured from ‘Original producers’ who manufacture billets directly from iron ores and roll the billets to produce steel conforming to IS: 1786, etc as per specification for road and bridge works of MORTH fifth revision April 2013, Clause 1009.3.1 Hot rolled deformed bars. 25 Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 Mtr. height in R.S. Joists flats, tees, angles and channels. 26 Labour charges for horizontal boring 100 mm dia in open well in rocky strata with all types of rock cutting & drilling tools etc. including all T &P required for job including dewatering arrangement. 27 Supply & Installation of single phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. Above 2 KW 28 Supply and Fixing of Electric feeder panel (having projected canopy)for submersible pump set Single phase up to 5 HP, comprising of DOL Starter, MCB, Indicating Light, Ammeter, Volt meter, connection plate, condensers of approved make and the panel enclosure should be made out from 18 gauge M.S. Sheet with powder coating. Panel size Height 600 mm Width 500 mm depth 250 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18 and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The operation of panel should be suitable for on 240 Volt AC Supply. 29 Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. 3 Core 4 Sq.mm 30 3 Core 6 Sq.mm 31 Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 or amended up to date in PE 80 grade and class PN 10 of following dia. including HDPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended up to date, along with clamping of submersible cable etc. complete in all respect. 40 mm Dia 32 50 mm Dia 33 63 mm Dia 34 Providing and Fixing of ISI marked PVC storage tank of following capacity as per IS: 12701-1989 (of approved make) with cover, 25 mm dia. 1 mtr long GI overflow pipe, 25 cm long 25 mm dia washout GI pipe with plug & socket, including P&F 32 mm dia Ball Cock (Float valve) IS 1703 marked with rod and PVC ball complete with brass weight 1000 gm, including P&F 15mm dia CI quarter turn heavy duty Bib Cocks four nos of superior quality and approved make, including interconnections complete job. (2000 Ltr.) 35 Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. 36 Fabrication & Fixing M.S. Stand of specified class of angle iron L-shaped of 50 mm size with four legs grouted by 300*300*300 mm CC Block M-15 in the ground and all legs tied up with each other through same size of angle iron along with cross bars to support the bottom of 1000 Ltr./ 2000 Ltr. PVC tank complete in all respect.
|
