Tender For Procurement Of Furniture Work At Daru Branch in India

Work Detail

Tender For Procurement Of Furniture Work At Daru Branch Procurement of furniture work at Daru Branch HALF HEIGHT PARTITIONS PARTLY PANELED AND PARTLLY GLAZED- BM CABIN (4’-6” Ht.)- Providing and fixing double skin full height partly glazed partition made out of aluminium hollow section of 50X25X1.5 mm as internal framed structure spaced not more than 600mm. c/c both ways, double skin partition fixed to aluminium frame made of 6mm. thk. Approved ply(IS:303), finished both side with approved laminate with 1.0 mm. thickness including the glazing part made with 06 mm thick clear glass Modi/saintgobin with etching film in the partition as per drawing size including supply and fixing of hardware all complete with as per drawing. BRANCH MANAGER TABLE- Providing & erecting in position free standing table made of 19 mm plywood (IS:303) sides, top & panel, finished with 1.0mm laminate & inside surfaces finished with mm liner laminate. Drawer cum cabinet unit of approx. over all size of 400x600x725mm.(h) of 19mm. thk. plywood. The unit shall comprise of1drawer, 1cabinet with approved shade with telescopic drawer slides. The drawer & cabinet unit shall be finished with 1.0mm laminate & inside surfaces finished with0.70 mm liner laminate. The quoted price should include cost of teak wood moulding/laminate to edges, wood lipping, multi locks of Godrej/ ebco make & other necessary hardware accessories including SS handles, pvc wire manager, key board tray, CPU trolley, foot rest etc. of approved quality. All the ply edges should be lipped & finished with laminate. The rate also include the cost of hardware like hinges, tower bolts, handles, magnets, wire manager etc. Size : 6'0" X 3'0" Including 12 mm clear float glass at top with edge polishing. BACK STORAGE ( 4’-6” HEIGHT) CABINETS in B.M. CHAMBER- Providing and fixing Sides to rage unit of 1'-6" depth or width as mentioned in the drawing made with Front shutter of 19mm thk ply and horizontal and vertical rack with mm thk. Board of approved make all complete with necessary hardware, locking arrangement, handle. There shall be horizontal self. All exposed surface should be finished with1.0 mm thk. laminate of approved make and shade and internal surface should be paint and polished as per drawing and direction. There shall be provision of horizontal and vertical rack inside the alcove as per design. FULL HEIGHT PARTITIONS PARTLY PANELED AND PARTLLY GLAZED- CASH CABIN SIDE WALL with DOOR- (7’-0” ht.) Providing and fixing double skin full height partly glazed partition made out of aluminium hollow section of 50X25X1.5 mm as internal framed structures paced not more than 600 mm. c/c both ways, double skin partition fixed to aluminium frame made of 6mm. thk. Approved ply(IS:303), finished both side with approved laminate with 1.0mm. thickness including the glazing part made with 06 mm thick clear glass of Modi/saint go bin with etching film in the partition as per drawing size including supply and fixing of hardware all complete with as per drawing. CASH COUNTER- Providing and fixing cash counter in two tier with2'-6"wide working counter a 8'-6" height and 1'-0" wide service counter a 3'-6" height made with19mmth board of approved make finishedwith1.0mm thick laminate of approved make and shade including the supply and fixing of slid in telescopic key board of EBCO/Efficient Gadgets ,3 nos drawer with lock of godrej make, foot rest , CPU stand with the provision of hole for wire. The inner side of the counter shall be painted with minimum 2coats of premium 1st quality paint as per drawing and instructions of the Architect/ Bank. GENERAL COUNTER- (8’-0” long, 4’-6” ht.) Providing and fixing double skin low height partly glazed partition made out of aluminum hollow section of 50X25X1.5mm as internal framed structures paced not more than 600 mm. c/c both ways, double skin partition fixed to aluminum frame made of 6mm.thk. approved ply (IS:303), finished both side with approved laminate with1.0 mm. thickness including the glazing part made with12 mm thick clear glass of Modi/ saint gobin with etching film in the partition as per drawing size including supply and fixing of hard ware all complete with .3.0 NOs. Drawer cum cabinet unit of approx. overall size of 400x600x725mm. (h) of 19 mm. thk. plywood. The unit shall comprise of 3.0 drawer, 3.0 cabinet with approved Shade with telescopic drawer slides. The drawer & cabinet unit shall be finis hed with1.0mm laminate & inside surfaces finished with 0.70mm liner laminate The quoted price should include cost of teak wood moulding /laminate to edges, wood lipping, multi locks of Godrej/ebco make & other necessary hard ware accessories including SS handles, pvc wire manager, key board tray, CPU trolley, foot rest etc. of

Contact Information