|
Tender For Request For Quotation (Rfq) For “Cable Laying And Termination On Turn Key Basis As Per Annexure LAYING of All LT power armoured cable as per feeder List Tray with complete dressing and tie. 1.5 SQ.MM X 4 Core Copper Armoured Cable (MCC to Pump or Emergency JB) 2.5 SQ.MM X 4 Core Copper Armoured Cable (MCC to Pump or Emergency JB) 4 SQ.MM X 4 Core Copper Armoured Cable (MCC to Pump or Emergency JB) 300 SQ.MM X 3.5 Core Aluminum Armoured Cable (MCC to UF MCC) LAYING of shielded Instrument cable as per List provide by complete dressing and tie. 0.75 Sq.mm x 3 core copper shielded cable for instrument-Lapp cable 0.75 Sq.mm x 4 core copper shielded cable for instrument-Lapp cable LAYING of copper flexible cable from Motor Junction to Motor Conduit pipe 2.5 Sq.mm x 4 core copper flexible cable 4 Sq.mm x 4 core copper flexible cable Cable Termination - Supply & Fixing Brass glands Indoor/outdoor application with gland rubber shroud) -for for Instrument cable both side marking joint with necessary socket/lug of long neck type connecting the same to various with complete tagging on cables and computerized ferruling Gland hole cutting in SS RIO Panel, MCC Panel, JB etc...) Copper Cables 1.5 sq.mm x 4 c Copper Cable 2.5 sq.mm x 4 c Copper Cable 4 sq.mm x 4 c Copper Cable Instrument cable Cables 0.75 sq.mm x 3 core Copper Cable 0.75 sq.mm x 4 core Copper Cable Flexible cable Cables 2.5 Sq.mm x 4 core Copper Cable 4 Sq.mm x 4 core Copper Cable Nr. Indira Bridge, Ahmedabad-Gandhinagar Highway, Village: Bhat, Dist.:Gandhinagar, PIN 382428 Tel. No. (+91-79) 23969055 – 58, Fax No. (+91-79) 23969059 Website: www.amul.com Only Installation of hot dip GI (80 to 100 micron) Perforated type cable tray with all accessories i.e coupler, GI nut bolts, bend, tee, reducer etc as per specification and drawings complete with all required hardware: 50 x 50 made out of 1.6 mm thick RMt 50.00 300 x 50 made out of 2 mm thick RMt 50.00 400 x 50 made out of 2 mm thick RMt 50.00 Only Installation of SS Wiremesh Cable tray with all accessories i.e coupler, SS nut bolts, bend, tee, reducer etc as per specification and drawings complete with all hardware :(cable tray joint only with argon welding for SS tray) 50 x 50 MM SS 304 wiremesh Cable tray RMt 100.00 100 x 50 MM SS 304 wiremesh Cable tray RMt 50.00 200 x 50 MM SS 304 wiremesh Cable tray RMt 20.00 300 x 50 MM SS 304 wiremesh Cable tray RMt 50.00 400 x 50 MM SS 304 wiremesh Cable tray RMt 50.00 Supply, Installation of GI & SS Structure support for cable tray, panel Isolator, motor & Pumps cable drops etc as per site requirement. (with required welding for jointing of cable tray and with spray paint on joints) Supply, fabrication and installation of various sizes clamps for cable tray supports using G.I. sections, Plate & rod as per drawings or instructions of engineer Incharge or consultant including applying Spray paint on welding joints with anchor fasteners etc. Kg 100.00 Supply, fabrication and installation of various sizes clamps for cable tray supports using SS 304 Sections, Plate & rod as per drawings or instructions of engineer Incharge with anchor fasteners etc. Kg 260.00 Supply, fabrication and installation of SS 304 Conduit pipe for cable drop & mounting of Junction box etc Size 63 MM,1.6MM Thickness RMt 12.00 Supply, fabrication and installation of SS 304 Conduit pipe for cable drop & mounting of Junction box etc Size 51 MM,1.6MM Thickness RMt 60.00 Earthing stations for equipment earthing as shown and specified in drawing for equipment complete with: Copper Earth Link: 38mm x 6 mm 1 ft Long Copper earth link fixed by necessary screws/bolt on wall with insulators No. 4.00 Laying and termination of 10 mm2 copper 1 Core Earth wire in cable tray/conduit Meter 200.00 Laying and termination of 4 mm2 Copper 1 Core Earth Wire in cable tray/conduit Meter 400.00 Supply and laying of 25 x 5 mm G.I Hot deep Earthing Strip Meter 200.00 Supply and laying of 40 x 6 mm G.I Hot deep Earthing Strip Meter 50.00 SS Isolator box, Earthing JB, RIO Panel, Termination and Rubber mat Supply, Installation, Testing & Commissioning of field Motor Junction box made from SS 304 Sheet with 32 Amp-4-Pin Industrial Plug-Socket & Emergency Pushbutton, Indication lamp, Internal wiring with connector, Protection IP-67. (As per given DOL Isolator Drawing) Used for up to 11 KW Feeder. Nos 10.00 Supply and installation of Earthing JB with copper Link in SS-304 Encloser (400MM *400MM*250MM) 1.6mm thickness (As per Drawing) Supply and installation of SS 304 UPS JB with I/P 32 Amp ELCB-2 Nos + 10 Amp DP MCB O/P- 10 Nos in SS-304 Encloser 700MM*700MM*250MM-1.6MM thickness (As per Drawing) Installation of New RIO Panel (Panel Supply by AFD) ONLY Laying of ASI cable for control Valve (cable supplied by AFD) Only cable termination with pin type lug and computerized ferrule work of ASI cable ONLY LAYING OF PROFIBUS CABLE, (cable supplied by AFD) ONLY TERMINATION WORK OF PROFIBUS CABLE Supply & Fixing Rubber mat FOR MCC PANEL & RIO PANEL as per IS 15652:2006 (thickness 2.5 mm) ERDA & CPRI Type Tested insulating mats. (2 m *1 m)
|
