|
Bids Are Invited For Set Up Of Prefabricated Room For Metabolic Caging System At National Institute Of Immunology, Aruna Asaf Ali Marg, New Delhi; A DISMANTLING 1 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.2 For thickness of tiles above 25 mm and up to 40 mm Sqm 5 2 15.7 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. 15.7.4 In cement mortar Cum 10 3 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Sqm 100 4 15.57 Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-inCharge. Sqm 1 5 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - incharge. cum 4 6 15.4 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge cum 2 7 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.2 Of area beyond 3 sq. metres each 1 8 15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 15.13.2 Of area beyond 3 sq. metres each 1 9 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum 100 10 MR Shifting/ removal of pipes (sewage, rainwater and domestic Water) including fixing of Butterfly Valves, Gate Valves etc. as per directions of engineer-in-charge. Rmt 40 11 MR Shifting/ removal of existing fire header pipes including handing over all salvagable material to the client and disposal of the debris/ unservicable material to the closest dumping ground as per the instructions of the Engineer In charge. All damaged surfaces to be repaired using plaster. each 0 Rate only 12 MR Dismantling & Shifting of Outdoor unit including copper piping each 0 Rate only B CIVIL WORKS 1 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 5 2 13.3 20 mm cement plaster of mix: 13.3.1 1:4 (1 cement: 4 fine sand) sqm 50 3 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 20 4 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) Sqm 10 5 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. sqm 50 6 13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm sqm 80 7 13.62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture sqm 80 8 13.56 Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 13.56.1 100 mm diameter pipes metre 10 13.56.2 150 mm diameter pipes metre 10 9 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood cum 0.3 10 MR Providing and fixing removable raised/false access flooring with 18mm Cement Fiber Board , 600x600mm Tiles of approved make for different plenum height with possible height adjustment upto 50 mm, etc. all complete, as per the architectural drawings, as specified and as directed by Engineerin-charge consisting of: sqm 30 11 MR 35MM THICK LAMINATED FLUSH DOOR WITH FLOOR SPRING:- 35mm thick flush Doors finished using 1mm Thick Highland Pine Laminate on both sides panel of size upto 2400mm x 1050mm complete with Hardware including floor spring, Door Closer, dead Lock with inbuilt key, D-Handle etc. including cost of teak lipping all around with melamine/ duco finish. The item to include installation of all kinds of latches as per the requirement. Nos 0.00 Rate only 12 MR Stile Glass door:- Supply & installation of Stile Door with Sleek System for 70x45mm Profiles. Stile Door frame of size 70X45mm with natural anodized/powder coated and including Flush Hinges (4Nos) & Lock with lever / H/D handle for rebated door (1 Nos.) and Door closer with 10mm clear toughened glass and necessary seals to be provided all around the door frames including installation charges for doors complete with all accessories as required in all respects. Single Leaf Stile Door with size uptp W1050mmx H2100mm with Natural Anodized Finish. Nos 1 Single Leaf Stile Door with size upto W 900mmx H2100mm with Natural Anodized Finish. Nos 1 13 MR FIRE DOOR:- Providing and fixing single leaf 120min Rated Fire Door of size 900x2400. with vision panel using wired glass complete with Fire proof door frame. One side to be finished in fire retardant paint and one side to be finished in Laminate of approved shade. All Frame to be finished in fire retardant paint. All hinges and hardware to be thermatically sealed and 120 mins fire rated. Nos 0 Rate only 14 MR STORAGE CABINET FOR GENERAL STORAGE:- Out of 19mm Commecial Ply Board finished using 1mm thick Laminate above complete with all hinges, drawer glides and hardware . All internal surfaces to be completed using balancing laminate. Including brass D-type handles for shutters and recessed type handles for drawers. Storage to be of all heights as per design. Storage shutters to be made in Ply/ glass as per design and drawings. sqm 0 Rate only 15 MR FROSTED FILM (CRYSTAL QUALITY):-Providing and fixing frosted film in approved pattern over glass surface with 01 yrs MCS warranty including cutting in desired pattern as approval of the Architect. (Only film surface area shall be measured and paid). sqm 0 Rate only 16 MR Aluminium Glass Window:- Supply & installation of Aluminium Glass Window with natural anodized/powder coated including Hinges & Lock with lever / H/D handle with 05mm clear toughened glass and necessary seals to be provided all around the frames including installation charges complete with all accessories as required in all respects. sqm 4 C CEILING & ROOFING 1 MR Puff Panels :- Desiging, Providing, installation and fixing of roof Puff panels made up of 50+80mm thick composite PUF panels sandwiched between PPGI 0.5mm Sheets including all required necessary hardware, fittings and fixture. The outer skin of trapezoidal PPGI sheet with depth of crest -28- 30mm. Pitch 195- 200mm trapezoidal sheet & inner skin micro riving PPGI sheet & minimum 50mm thick layer of rigid CFC free polyurethane foam of density of 40±2 Kg/m3 as insulation. The color of PPGI sheetto be as per approval of engineer-in-charge/ Architect. The gaps between puff panels to be sealed as per manufacturers specifications to make it air and water tight to prevent the entry of dust and water seepage in case of extreme weather conditions. 2 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16 .2 Hot finished seamless type tubes kg 1750 3 The Pipes will be supported with U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) Metre 20 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) Metre 20 4 MR Awing :- Providing & Fixing Awing for Covering of Doors and Windows etc. all completed as per the direction of enginner in charge. sqm 5 5 MR CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood framings hung from ceiling @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on vertical & 12mm thk. Commercial ply on horizontal surface (straight & curved). Inclusive of finishing in Paint. Rmt 0 Rate only 6 12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end Including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45 .1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) sqm 60 D FLOORING 1 11.47 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 11.47.2 Size of Tile 600x600 mm sqm 70 2 11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge. 11.48.2 Size of Tile 600x600 mm sqm 70 3 11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 10 4 24.2 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manneras per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per .... more in document
|
