Tender For Class Room Table Dual Desk With Attached Chair Supply in India

Work Detail

Tender For Class Room Table Dual Desk With Attached Chair Supply , Class Room Table (Dual Desk) With Attached Chair , The Product Should Be In Complete Knock Down Structure As Much As Possible/Feasible Enabling Ease In Transportation And Assemblies Within Classrooms. The Panels Are Made From 18 ±0.5Mm Thk Pre-Laminated Mdf (Is 14587) With 1 Mm Pvc Edge Banding On All Sides. Top Dimension Shall Be 1048 X 378 Mm. Top Height Shall Be 750Mm. Seat Dimension Shall Be 1048 X 335Mm, Seat Height Shall Be 437 Mm. Back Dimensions Shall Be 1048 X 265Mm. Size May Vary +/- 5Mm. The Under Structure Is Made Of Erw Tubes [Is 7138] 25.4 ±0.3Mm X 25.4 +0.3Mm X1.2 +/- 0.096Mm Thk Powder Coated 50Microns (+10) At Base Which Are Welded To The Desk And Seat Supports That Are Made Of Ms C Sections 29+/-0.3Mm X 24.9+/-0.3Mm X 1.2+/-0.096Mm Thick Powder Coated 50Microns (+10). Stiffeners That Are Provided Between The 2 Vertical Frames At Base And Back Of Seat Are Made From Erw Tubes [Is 7138] 25.4 ±0.3Mm X 25.4 ±0.3Mm X1.2 ±0.096Mm Thk Powder Coated 50Microns (+10). The Tubes Are Closed With Plastic Caps. Additional Horizontal Supports Of Erw Tubes [Is 7138] 25.4 ±0.3Mm X 25.4 ±0.3Mm X1.2 ±0.096Mm Thk Powder Coated 50Microns (+10) Are Placed Between Front Legs And Between Back Legs To Add The Rigidity Of The Structure. The Storage Shelves Are Made From 0.6 ±0.09Mm Thk Powder Coated 50 Microns (+10) Ms Sheet Which Is Affixed Below The Desk Top. Hooks Äre Provided On Either Side Of The Vertical Frame Of The Desk, For Hanging Bags/Bottles. They Are Made From 6.0 Mm Dia Ms Rods Powder Coated 50Microns (+10). The Under Structure Is Assembled Using M5 Trilobular Taptite Screws / Mig Welded. Nylon Studs Are Provided On Bottom Side Of Rh/Lh Frame, All Fabricated Parts Which Require Welding Are Mig / Spot Welded. The Screw Joining Wooden Panels To Under Structure Are Chip Board Screws. All Steel Structural Components Shall Be Made From Virgin Material And Tested Conforming To Is: 513/ Is: 10748/ Is: 2062/ Is: 7138. Recycled Steel Will Not Be Accepted. Top Understructure - 960Mm (W) X 310Mm(D). Back Panel Support - 960Mm(W) X 325Mm(H). Seat Support - 960Mm(W) X 280Mm(D). Colour: Silver, Grey Pre-Laminated Mdf, Black Erw Tubes & Ms Sheet

Contact Information