|
Anti-Riot Shin Guard/Leg Guard A Pair Of Leggings (Right Leg And Left Leg), In Black, Made With Injected Thermoplastic Material (Abs) Acrylonitrile, Butadiene, High Impact Styrene, With Each Unit Of The Pair Being Composed Of 7 Rigid Protective Parts, Broken Down As Follows: Kneecap/Knee Pad – 1 Piece; Shin Protection - 1 Piece, Ankle Protection - 2 Pieces And Foot Protection - 3 Pieces. On The Inside Of The Shin Guard And Knee Pad, There Is A Piece Of 5 Mm Soft Eva Coated With Cotton Canvas Fabric, Which Has The Property Of Being Self-Extinguishing And Does Not Spread Fire, Sewn In A Way That Allows It To Be Articulated. With Polypropylene Fabric Type 600 Its External Faces And Under The Rigid Plates Already Described, With Finishing At The Edges In Polypropylene Welt. With A Spacer Between The Knee Pad And The Shin Guard, This Composition Of An Eva Strip 5 Mm Thick By 160 Mm Wide By 30 Mm High, Covered By A Leather Strip, Measuring 250 Mm By 100 Mm, Facilitating Articulation. By A Shin Guard Fixed To The Lining On The Top And Sides By Four No. 05 Rivets, Made Of Oxidized Brass (Black), And The Internal Part Of The Rivets Must Have Polymer Washers. Its Fixing Must Be Done In Such A Way That There Is A Space Between The Pieces With Properties Of Avoiding Direct Impacts On The User. With All The Plastic Parts Described Above Fixed To The Lining By Means Of Black Oxidized Brass Rivets. By Three Quick-Coupling Clasps With Lock, With The Fitting Pin Mounted On A Leather Strip And Fixed To The Shin And Knee Pad With Two Rivets No. 05, Oxidized Brass (Black). The Clasp Attachment Itself Must Be Fixed To The Ends Of The Polyamide Strip And Must Also Have Double Polyamide Loops On Each Beam To Prevent The Clasp From Moving With Consequent Loosening Of The Straps That Secure The Shin Guard To The User. The Two Upper Straps Will Be Positioned Diagonally, So As To Not..., Anti-Riot Helmet The Anti-Riot Helmet Must Have A Model In Size That Meets The Individual Anatomical Differences Of Potential Users With The Features Listed: It Must Be Made Of Molded Fiberglass Material That Provides Full Protection To The Skull; The Size And Shape Must Comply With The Stipulations In The Figure Above, With Tolerance Up To The Limit Of 10 Mm, Thickness Of 3 Mm With Tolerance +/- 0.2 Mm, Be Indeformable When Subjected To Weathering, Always Maintaining Its Original Shape Without Dents, Cracks Or Other Deformations Resulting From Impacts Or Falls; The Helmet Must Provide High Resistance To The Penetration Of Sharp Objects And High Energy Absorption Capacity When Impacted. It Will Have Internal Spaces That Allow The Use Of Communication Equipment; It Must Have A Smooth External Finish, In Matte Black (Polyurethane Painting) And, On The Edge Of The Hull, Throughout Its Entire Length, It Must Contain A Rubber Profile Finish Fixed With Its Own Glue That Does Not Allow It To Detach; Internally, It Must Contain: In Its Upper Part, A 5 Mm Thick Soft Eva Cushion For Shock Absorption; On The Sides, At The Height Of The Ears, 40 Density Foam Covered With A Conformal Hood, Which Is Fixed To The Hull With Velkro. The Chamois Must Allow Adjustment Ranging From 500 Mm To 620 Mm In Its Perimeter, Being Fixed To The Helmet
|
