|
Tender For Certain Misc Repairs To Periphery Security Wall At Old Amritsar Cantamritsar Cantt - Taking down cement plaster on brick, concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. of any description complete all as specified and directed. 2 Material and labour for rendering 15 mm thick on brick work or concrete surfaces on walls in cement mortar 1:4 finishing fair and even without using extracementcomplete all as specified and directed. 3 Material and labour for preparation of new plastered surfaces and applying two coatsof cement base paint of approved shade on wall surfaces complete all as specified and directed. 4 Material and labour for preparation of old plastered surfaces of walls and applying one coatof cement base paint of shade as approved complete all as specified and directed. 5 Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed. 6 Material and labour forbrick work with sub class B bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and directed. 7 All as per Srl item No 06above but except bricks (old serviceable bricks obtained fromdemolition shall be reused after necessary cleaning of mortar). 8 Material and labour for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in rounded or chamfered on edges, coping etc. including necessary form work, if any and finishing exposed surface even and smooth using extra cement complete all as specified and directed. 9 Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) /fibre sheet andin anyposition , boundry walls,complete all as specified and directed. 10 Dismantling Plain or corrugated galvalume sheet of 0.50mm thickness,in any position complete all as specified and directed 11 Dismantling structural steel work of any description, in any position as in gates, posts, framed work etc. complete all as specified and directed. 12 Material and labour Cutting holes (not exc 150sq cm) or into wallls or through brick walls built in Cement Mortar and making good with cement mortar 1:3 or Cement Concrete 1:2:4 Type B-1 as required at site complete all as specified and directed. 13 Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonry, etc. and making good disturbed ground complete all as specified and directed. 14 Supply and fixing structuralsteel workconforming to Fe 290 (Grade E- 165)as in vertical posts, framings, etc. with or withoutY/U/Swan Neck made of angle or other section, made to shape complete including necessary cuttings, weldings, drillings as required and fixing complete all as specified & directed. 15 Supply and fixing structuralsteel workin tubular framing work conforming to IS 4923:1997 as in vertical posts, framings, etc. other section etc., made to shape complete including necessary cuttings, weldings, drillings as required and fixing complete all as specified & directed. 16 Supply and fixing in 2 mm thk Fibre glass reinforced translucent plain or corrugated sheeting with two corrugations side lap fixed with coach screws and washers as in claddings etc. and in any position as required fixing complete all as specified & directed. 17 Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of having tensile strength of 550 Mpa as in roof coverings/ claddings and in any position as requiredfixed with self tapping screws and fixing complete all as specified & directed. 18 Supply and fixing Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick coloured having tensile strength of 550 Mpa as in roof coverings/ claddings, gates,and in any position as required fixed with self tapping screws complete all as specified and directed. 19 Supply & fixing in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note :- Each line of wire to be measured. 20 Material and labour for black bituminous paint with two coat of surfaces of any description wood, steel,iron,concrete,brick,stone etc exceeding 10 cm in width or girth complete all as specified and directed. 21 Material and labour preparation of old painted surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. 22 Material and labour two coats of synthetic enamel painting new untreated steel surfaces over 10 cm in width or girth over a coat of red oxide primer not otherwise described including preparation of surfaces complete all as specified and directed. 23 Material & labour for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or neccesary welding attachment complete all as specified & directed. 24 Dismantling of one way trellis work (Jafri) , including taking as under of battens in trellis (posts and rails measured seperately) complete all as specified and directed. 25 Material & labour for providing precast cement concrete louvers and jalies 25 mm thick (measured solid) of type B0 1:2:4 (using 12.5 mm graded aggregateand set in cement mortar 1:4 including preparation of surface and applyingtwo coats of cement base paint to new surface including all moulding but excluding frame complete all as specified and directed. 26 Material & labour for providing precast cement concrete in window or door,cills , lintels coloumns , posts ,boundary pillers bed plates,pintle blocks , type- B-1 , 1:2:4 (20 mm graded aggregates) with fair finish including chamfer weathering , throating etc and setting in mortar including necessary form work complete all as specified and directed. 27 Material and Labour forin replacemennt earthing complete with galvanized steel earth plate electrod of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 metre distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers, 25 mm dia light grade GI pipe, funnel, wire mesh, Concrete 1:3:6 type C-1 for pit and RCC pit cover. The extra cost of the watering pipe, bends, elbows shall be included in the unit rate. Note : RCC pit cover shall be precast of RCC 1:2:4 type B-1 80mm thick reinforced with XPM weighing notless than 4 Kg/Sqm,complete all as specified and directed.
|
