|
Tender For Repair To Furniture At Af Station Jaipur; 1 BED HARD FD/E6/MAP/08 2 Removing old u/s top and S&F new top ofplywood (Make: Greenply/Century/ Action tesa/Kitply/Archidply) of 12mm thick BWR Grade ISI Marked confirming to IS-303 of Bed plywood made to shape & size as shown on drg and complete all as directed by Engr in Charge. 3 Removing old u/s head board and S&F newhead board made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis) ISI marked dully covered with teak wood beading 4mm thick all around with suitable screw with cleats as specified on drg and complete allas directed by Engr in Charge. 4 Description all as per Ser No 1.02 here-in-before but for foot board. 5 S&F new PVC hard rubber shoes as per drg and complete allas directed by Engr in Charge. 6 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete allas specified and directed. 7 BOOK CASE STEEL FD-90(M) 8 Shutter glass: M&L for removing old worn out shutter glass from Book Case Steel and S&F new shutter glass of 3mm plane glass complete all as specified on drg and as directed by Engr in Charge. 9 Shutters: M&L for removing old worn outShutters from Book Case steel and S&F new Shutter with made out of 1 mm thick MS Sheet with 3mm plane glass complete all as specified on drg and as directed by Engr in Charge. 10 Lock: M&L for removing old worn out lockfrom Book Case steel and S&F new lock (Set of four lock with one set of key) (Make : Godrej/Harrison/Johnson) complete all as specified on drg and as directed by Engr in Charge. 11 Handle: M&L for removing old worn out handle from Book case steel and S&F new handle of best quality complete all as specified on drgand as directed by Engr in Charge. 12 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete allas specified and directed. 13 CHAIR CB STEEL WITH ARM FD-75(M) 14 S&F MS cleats of size 20x30x65mm wide weld to existing frame for fixing the seat and back complete allas specified and directed. 15 Removing u/s frame seats and S&F new frame seats with cane complete allas specified and directed. 16 Removing u/s frame back and S&F new frame back with cane complete allas specified and directed. 17 S&F new 2nd class HW Handle of suitable size complete allas specified and directed. 18 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete allas specified and directed. 19 CHAIR CB STEEL WITHOUT ARM FD-75(M) 20 S&F MS cleats of size 20x30x65mm wide weld to existing frame for fixing the seat and back complete allas specified and directed. 21 Removing u/s frame seats and S&F new frame seats with cane complete allas specified and directed. 22 Removing u/s frame back and S&F new frame back with cane complete allas specified and directed. 23 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete allas specified and directed. 24 CHAIR COMPUTER/REVOLVING/EXECUTIVE/ - FD/E6/MAP/01 & TP 25 Seat & Back: M&L for removing existing u/s seat and back and S&F new seat and back re-upholstering with new Fabric containing material like Acrylic, Polyester, Poly viscose, Poly propylene of color as approved by Eng-in-charge on and including PU foam of 50 density, 75mm thick for seat and 50mm thick for back, fixed over 12mm thick hot pressed plywood duly stitched with PVC lipping complete all as specified on drg and as directed by Engr in Charge. Note: Seat and back will measured as one unit in chair. 26 Seat & Back: M&L for removing existing u/s seat and back fabric and M&L for new re-upholstering with new Fabric containing material like Acrylic, Polyester, Poly viscose, Poly propylene of color as approved by Eng-in-chargecomplete all as specified on drg and as directed by Engr in Charge.Note: Seat and back will measured as one unit in chair. 27 Castor Wheel: M&L for removing existing u/s or broken castor wheel and S&F of New Castor wheel to the chair in suitable pattern/model to match the original complete all as specified andas directed by Engr in Charge. 28 Handle: M&L for removing existing broken/ u/s handle from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original complete all as specified and as directed by Engr in Charge. 29 Bottom Base: M&L for removing existing u/s or worn out bottom base from the Chair & supply and fix new Base with castor wheel to the chair in suitable pattern/model to match the original complete all as specified and as directed by Engr in Charge. 30 Gas lifting Hydraulic System:M&L for removing of old u/s gas lift and providing new gas lift maintenance free, environmental friendly, chrome free cylinder tube fixed in a MS black powder coated into centre column tube 38mm dia and 2mm thick. It shall have 100mm stroke length and gas pressure of 300 force complete all as specified in drg and directed by Engr-in-charge. 31 CHAIR EXECUTIVE: - TP 32 M&L for removingexisting old unserviceable seat from the chair and S&F new seat frame made of 12mm thick hot pressed plywood with re-upholstering with new fabric containing material like PU leatherite fabric skin friendly of approved quility and color, duly stitched with PVC lipping all around on PU foam of 100mm, 40 density after tightning existing frame complete all as directed by Engr in Charge. 33 Description all as per Ser No 6.01 here-in-before but for Back of chair and PU foam of 75mm, 32 density. 34 Handle: M&L for removingexisting broken/ unserviceable handle from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original complete all as directed by Engr in Charge. 35 Bottom Base: M&L for removing existing u/s or worn out bottom base from the Chair & supply and fix new chromium plated metal Base with castor wheel to the chair in suitable pattern/model to match the original complete all as specified and as directed by Engr in Charge. 36 Gas lifting Hydraulic System:M&L for removing of old u/s gas lift and providing new gas lift maintenance free, environmental friendly, chrome free cylinder tube fixed in a MS black powder coated into centre column tube 38mm dia and 2mm thick. It shall have 100mm stroke length and gas pressure of 300 force complete all as specified in drg and directed by Engr-in-charge. 37 TABLE BED SIDE FD/E6/MAP/15 38 Removing u/s top and S&F new Top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Eco Board) ISI marked and exposed side of board to be coverd with matching PVC strip complete allas specified and directed. 39 Removing u/s top drawer and S&F new Top drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Eco Board) ISI marked with front side with 12mm BWR grade plywood in three sides and 6mm BWR plywood as bottom along with Chromium Plated handles complete allas specified and directed. 40 Removing u/s bottom drawer and S&F new bottom drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Eco Board) ISI marked with front side with 12mm BWR grade plywoodin three sides and 6mm BWR plywood as bottom along with Chromium Plated handles complete allas specified and directed. 41 Removing u/s back and S&F new back made of 6 mm thick commercial plywood BWR grade ISI marked complete allas specified and directed. 42 Removing u/s side and S&F new Side made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked and exposed side of board to be coverd with matching PVC strip complete allas specified and directed. 43 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete allas specified and directed. 44 TABLE COMPUTER - FD/E6/MAP/03 45 Removing u/s top and S&F new Top made of 18/19mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Eco Board) ISI marked and exposed side of board to be coverd with and including 06mm thick half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 46 Removing u/s shelves and S&F new shelves made of 18/19mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Eco Board) ISI marked and exposed side of board to be coverd with and including 06mm thick teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 47 Removing u/s drawer and S&F drawer made of 18/19 mm thick prelaminated MDF Board (Make: Green Panelmax /Action tesa/ Asis/Eco Board) ISI marked and exposed side of board to be coverd with and including 06mm thick teak wood beading fixed with fevicol and headless nails all around the edges with telescopic chanel complete allas specified and directed. 48 Removing u/s pullout tray/keyboard tray and S&F new pullout tray/keyboard tray made of 18/19 mm thick prelaminated MDF Board (Make: Green Panelmax /Action tesa/ Asis/Action Teesa) ISI marked and exposed side of board to be coverd with and including 06mm thick teak wood beading fixed with fevicol and headless nails all around the edges with telescopic chanel complete allas specified and directed. 49 Removing u/s sides and S&F new sides made of 18/19 mm thick prelaminated MDF Board and exposed side of board to be coverd with and including 06mm thick teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 50 Removing u/s knob and S&F new knob for drawer as approved by Engr in Charge.. 51 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete allas specified and directed. 52 TABLE OFFICE CLERK STEEL FD-1004 53 Removing u/s top and S&F newtop made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Eco Board) ISI marked confirming to IS-14587 Grade-I with 6mm half round teak wooden beading fixed with fevicol and headless nails all round the edges complete allas specified and directed. 54 Removing u/s drawers and S&F new drawers made out of 1 mm thick MS Sheet complete allas specified and directed. 55 Removing u/s locks of drawer and S&F brass locks of size 40mm, 5 lever ISI marked with duplicate key complete allas specified and directed. 56 Repairing old u/s drawers by necessary welding complete allas specified and directed. 57 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete allas specified and directed. 58 CHARPOY GI PIPE - FD-220 59 M&L for removing existing u/s and broken long rail and supply and fix new long rail of GI Pipe, 32 mm bore, medium grade, ISI marked, threaded at both ends, fixed in position complete all as shown on drawing and as directed by Engr in Charge. 60 M&L for removing existing u/s and broken short rail and fabrication and fixing of short rail by cutting and converting from long rail obtained from item No. 10.01 here-in-before and threading the both ends, fixed in position complete allas specified and directed. 61 M&L for removing existing u/s and broken legs from charpoy and fabrication and fixing of legs by cutting and convertingfrom short rails obtained from item No. 10.02 and threading at one end and S&F MS bottom plate 3mm thick 55mm dia by welding at other end of legs and fixed in position complete allas specified and directed. 62 M&L for flat iron stiffner of size 900x40x5mm duly painted with two coat of black color synthetic enamel paint over a coat of red oxide/primer and fitted over the long rail by welding and drilling holes in flat iron on both side of every stiffner complete allas specified and directed. 63 S&F MS iron strips of size 75x40x5mm duly holed/drilled for tightening plywood and strip with semi circular top bolts and washer and welded to strip with each corner of charpoy including painting with two coat of black color synthetic enamel paint over a coat of red oxide/primer complete all as specified and directed by Eng-in-charge. 64 Removing of existing nylon newar from charpoy and S&F 12mm thick comercial plywood BWR grade ISI Marked confirming to IS-303 (Make-Greenply /Archid ply/Century ply/kitply) with mild steel nuts and bolts of 75mm long , 6mm thick with hexagonal or square head at one end with washer (02 Nos on each long rail and 02 Nos on each short rail/stiffner) after drilling holes complete allas specified and directed. 65 CHAIR METALLIC-TP (Make -Durian) 66 Seat & Back: M&L for removing existing u/s seat and back and S&F new seat and back re-upholstering with new Fabric containing material like Acrylic, Polyester, Poly viscose, Poly propylene of color as approved by Eng-in-charge on and including PU foam of 50 density, 75mm thick for seat and 50mm thick for back, fixed over and including 12mm thick hot pressed plywood duly stitched with PVC lipping complete all as specified on drg and as directed by Engr in Charge.Note: Seat and back will measured as one unit in chair. 67 Seat & Back: M&L for removing existing u/s seat and back fabric and M&L for new re-upholstering with new Fabric containing material like Acrylic, Polyester, Poly viscose, Poly propylene of color as approved by Eng-in-charge complete all as specified on drg and as directed by Engr in Charge. Note: Seat and back will measured as one unit in chair. 68 Handle: M&L for removing existing broken/ u/s handle from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original complete all as specified and as directed by Engr in Charge. 69 S&F new PVC hard rubber shoes with MS screws complete allas directed by Engr in Charge. 70 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete allas specified and directed. 71 LOCKER STEEL FD-1029, FD-257 72 Removing u/s Shelves and S&F new shelves made out of 1mm thick MS sheet as per drawing and fixed by necessary welding complete allas specified and directed. 73 Removing u/s lock and S&F new lock(Make : Godrej/Harison/Johnson) 6 lever with duplicate key as per drg complete allas specified and directed. 74 Removing u/s legs and S&F new legs made out of 18 guage MS sheet made to shape and size as per drawing complete allas specified and directed. 75 Removing u/s hinges and S&F new hinges of required size as per drawing complete allas specified and directed. 76 Removing u/s handle and S&F new chromium plated handle of size 100mm with nuts and bolt washer as per drawing complete allas specified and directed. 77 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint Out side and In side complete allas specified and directed. 78 ALMIRAH STEEL LARGE AND MEDIUM FD-1031, FD-1032 79 Removing unserviceable locks and S&F new lock (Make : Godrej/Harison/Johnson) 6 lever with duplicate key as per drg complete allas specified and directed. 80 Removing u/s handle and S&F new chromium plated handle of size 125mm with nuts and bolt washer as per drawing complete allas specified and directed. 81 Removing u/s hinges and S&F new hinges of required size as per drawing complete allas specified and directed. 82 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint Out side and In side complete allas specified and directed. 83 CHARPOY WITH HARD PLY TOP FD-220 84 Removing old u/s plytop and S&F new plytop of 12mm thick commercial plywood BWR grade confirming to IS-303 (07 ply) ISI marked (Make: Greenply/Archid ply/Century ply/Kitply) to be fixed with 25mm long steel screw with out any joint as per drg complete allas specified and directed. 85 Removing old u/s stiffener and S&F new MS iron stiffener of size 900x40x5mm fitted over long rail by welding and duly holed/drilled in flat iron including painting with two coat of black color synthetic enamel paint over a coat of red oxide/primer complete all as specified and directed by Engr-in-charge. 86 S&F new MS nuts & bolts with semi circular or square head with 02 nos of washers complete allas specified and directed. 87 CHAIR DINING CUSHIONED/SPECIAL/LONG BACK/ (FD-1049(M), FD-1105, FD/MAP-II/03 & TP) : - 88 Replacement of u/s Stiffener made of 1st class hard wood (one large piece and two small piece) complete allas specified and directed. 89 Replacement of u/s Front leg made of 1st class hard wood complete allas specified and directed. 90 Replacement of u/s Rear leg made of 1st class hard wood complete allas specified and directed. 91 Replacement of u/s bend stiffner for back rest made of 1st class hard wood complete allas specified and directed. 92 Replacement of old u/s Seat and S&F new 70mm thick Seat made of 40 density foam (Make: Sleep Well, Featherfoam, Kurlon(Gold)) duly covered with tapestry cloth over and including 12 mm thick plywood(Make: Greenply/Century /Kitply) ofBWR Grade ISI Marked conforming to IS-303 complete allas specified and directed. Note: Rate of tapestry cloth shall not be less than Rs 400/-per RM andcolour and texture of Tapestry shall be approved by AGE. 93 Replacement of old u/s Seat foam with fabric and S&F new 70mm thick Seat made of 40 density foam (Make: Sleep Well, Featherfoam, Kurlon(Gold)) duly covered with tapestry cloth containing material like acrylic, polyster, polyviscose, polypropylene of color and texture as approved by Engineer-in-charge complete allas specified and directed. Note: Rate of tapestry cloth shall not be less than Rs 400/-per RM andcolour and texture of Tapestry shall be approved by AGE. 94 M&L for tightening the joints by pinning, screwing, nailing, glueing and placing every part intact complete all as specified and directed. 95 CHAIR DINING FD-279 : - 96 Replacement of u/s Stiffener made of 1st class hard wood (one large piece and two small piece) complete allas specified and directed. 97 Replacement of u/s Front leg made of 1st class hard wood complete allas specified and directed. 98 Replacement of u/s Rear leg made of 1st class hard wood complete allas specified and directed. 99 Replacement of u/s Front/back/side rail made of 1st class hard wood complete allas specified and directed. 100 M&L for removing of u/s cane from chair including recaning with new cane of white colour of size 3 mm wide all around for border of seat and back and 2 mm wide half round for remaining portion of chair dining complete allas specified and directed. 101 CHAIR EASY FD-229, FD-17(M) : - 102 Replacement of u/s Front leg made of 1st class hard wood complete allas specified and directed. 103 Replacement of u/s Rear leg made of 1st class hard wood complete allas specified and directed. 104 Replacement of u/s Front/back/side rail made of 1st class hard wood complete allas specified and directed. 105 Replacement of u/s back rest made of 1st class hard wood complete allas specified and directed. 106 Replacement of u/s Arms of suitable size as shown on drg complete allas specified and directed. 107 M&L for removing of u/s cane from chair including recaning with new cane of white colour of size 3 mm wide all around for border of seat and back and 2 mm wide half round for remaining portion of chair easy complete allas specified and directed. 108 COMPUTER TABLE - TP 109 Removing of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Eco Board) ISI marked with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 110 Removing old u/s keyboard tray/drawer and S&F new keyboard tray/drawer made of 18/19 mm thick prelaminated MDF Board with Type-II telescopic chanel and with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 111 Removing old u/s side and S&F new Side made of 18/19 mm thick prelaminated MDF Board with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 112 Removing old u/s bottom Shelves and S&F new shelves made of 18/19 mm thick prelaminated MDF Board with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 113 STUDY TABLE -1350mmX750mmX750mm- TP 114 Removing of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/Asis/Eco Board) ISI marked with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 115 Removing old u/s keyboard tray/drawer and S&F new keyboard tray/drawer made of 18/19 mm thick prelaminated MDF Board with Type-II telescopic chanel and with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 116 Removing old u/s side and S&F new Side made of 18/19 mm thick prelaminated MDF Board with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 117 Removing old u/s Shelves and S&F new shelves made of 18/19 mm thick prelaminated MDF Board with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 118 Removing u/s locks of drawer and S&F new locks of size 40mm, 5 lever (Make: Godrej/Harrison/Johnson) ISI marked with duplicate key complete allas specified and directed. 119 TABLE CENTRE FD-274 120 Removing of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/Asis/Eco Board) ISI marked with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 121 Replacement of u/s Long rails made of 1st class hard wood complete allas specified and directed. 122 Replacement of u/s Short rails made of 1st class hard wood complete allas specified and directed. 123 Replacement of u/s Stiffener made of 1st class hard wood (two large piece and two small piece) complete allas specified and directed. 124 TABLE DINING 6 PERSON FD-273/FD-239/FD-376 125 Removing old u/s Table top and S&F new table top made of 18/19 mm thick Prelaminated MDF Board exterior grade with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete allas specified and directed. 126 Removing of old/us legs and S&F new leg made of 1st class teak wood complete all as specified and shown in drg. 127 Replacement of u/s Long rails made of 1st class teak wood complete allas specified and directed. 128 Replacement of u/s Short rails made of 1st class teak wood complete allas specified and directed. 129 TABLE PEG FD-277 & 384 130 Removing old u/s Table top and S&F new table top made of 18/19 mm thick Prelaminated MDF Board exterior grade with teak wood beading 04 mm thick half round fixed with fevicol and headless nails all around the edges complete allas specified and directed. 131 Replacement of u/s legs of suitable pattern and size complete allas specified and directed. 132 Replacement of u/s Long rails made of 1st class hard wood complete allas specified and directed. 133 Replacement of u/s Short rails made of 1st class hard wood complete allas specified and directed. 134 Replacement of u/s Stiffener made of 1st class hard wood (two large piece and two small piece) complete allas specified and directed. 135 TABLE 3"x 2" WITHOUT DRAWER FD-284 136 Removing old u/s Table top and S&F new table top made of 18/19 mm thick Prelaminated MDF/Particle Board exterior grade with teak wood beading 06 mm thick half round fixed with fevicol and headless nails all around the edges complete allas specified and directed. 137 Replacement of u/s Long rails made of 1st class hard wood complete allas specified and directed. 138 Replacement of u/s Short rails made of 1st class hard wood complete allas specified and directed. 139 Replacement of u/s Stiffener made of 1st class hard wood complete allas specified and directed. 140 FRECH POLISH: M&L for cleaning, mild grinding and preparing the wooden surface of any description, filling of cracks with putty/wood filler including tightening of loose joints if any and applying two coats of french polish for the following furnitures. Color/shade shall be approved by Engr-in-charge. 141 Chair Dining FD-279 : - 142 Chair Dining Cushioned/Special/Long back/ (FD-1049(M), FD-1105, FD/MAP-II/03 & TP) : - 143 Chair easy FD-229, FD-17(M) : - 144 Table Peg FD-277 & 384 145 Table Centre FD-274 146 Table Dining 6 Person FD-273/FD-239/FD-376 147 Table Dining 8 Person FD-273/FD-239/FD-376 148 Table 3"x 2" Without Drawer FD-284 149 Sofa set 5 seater FD-373,FD-258,FD-281 150 CHAIR SCHOOL WITH HANDBOARD- FD/E6/MAP/05 151 Removing old unserviceable seat and back of chair and S&F one piece PVC seat and back virgin quality complete all as per drg and specified. 152 Removing old unserviceable handboard of chair and S&F new handboard top openable fixed on right hand side made of 18mm thick prelaminated particle board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Eco Board) ISI marked conforming to IS-14587 with PVC edging all around screwed on 25mm round hollow MS pipe complete all as per drg and specified. 153 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete allas specified and directed. 154 THREE SEATER PERFORATED STAINLESS STEEL WAITING CHAIR-TP 155 M&L for repairing broken parts of three seater waiting chair by welding on existing frame and making chair functional complete all as directed by Engr-in-charge. 156 M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete allas specified and directed.
|
