|
Tender For Sardar Sarovar Narmada Project Supply Of Materials For Replacement Of Different Types Of Luminaries And Miscellaneous Electrical Items At Sardar Sarovar Dam Site.-Supplying LED street light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V.Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity ratio 0.45. Luminaire efficacy> 100 lumens/watt. LED driver efficiency> 85%.( fittings required LM-79 & LM-80 (Make- 1 certificates). Havells/Phillips/Wipro/Syska/Bajaj/Crompton/Osram/Surya/Panasonic) Street Light (IP-65). Surge protection -4KV integral and 10 kv non integral Light must have 440V AC line supply protection. It should withstand 48 hours line for 440VAC supply. 90 watts. (Cat-III) 2 Providing Miniature circuit breaker single pole 0.5A to 2A system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark 3 Supplying LED light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity ratio 0.45, Luminaire efficacy> 100 lumens/watt. LED driver efficiency 85%(fittings required LM-79 & LM-80 certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any wattage capacity between shown.) the ranges Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories wired upto terminal block.IP 65 40W Cat.III 4 Supplying LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. 120 watts Cat.II 5 Supplying LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. 250 watts Cat.III 6 Supplying LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED, LED driver efficiency > 85 % (fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)Tube Light with integral driver20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat.III 7 Supplying led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5,LED Lamps integral type, with PC diffuser suitable LAMP holder 9 Watts Cat.III 8 Repairing of existing outdoor LED light fixture(flood light/street light/bollard lights/decorative wall lights/landscape light etc as per sample )by suitable driver 4 kv,IP65 according to LED PCB as per requirement of following rating wattage-capacity . 38-48 watt capacity 12 Supplying approved make suitable panel indicator LED type lamp, lens cover, complete erected with necessary connections. RED-15 Nos, Green - 25 Nos.. Yellow-20 Nos. (1.45W 230 V) 13 Supplying approved make ignitor suitable for HPSV fittings, 400W light 14 Approved make High pressure sodium vapour lamp. Tubular type 400W, 230/240/250V, erected, if required 15 Supplying approved make, heavy duty polyester filled ballast suitable for HPSV lamp 400 Watt, Cat.III 16 Providing Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. 100 Amps. FP (100 mA Sensitivity) Cat.III 17 Providing Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz, having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed. 40Amps. DP Cat.III 18 Providing XLPE(IS:7098)(1)-88 ISI armored cable multistrand Aluminum conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing pipe of following size of cables. (Make trench Havells/Polycab/RRKable/Finolex) 4 core 16 Sq. mm Providing XLPE(IS:7098)(1)-88 ISI armored cable multistrand Aluminum. conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing of following SEZO of cables. (Make 19 trench pipe Havells/Polycab/RRKable/Finolex) 4 core 10 Sq. mm 20 Providing Inverter based approved make split air-conditioning unit consisting of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing, drain PVC pipes suitable for (cost includes Eco Friendly green gas charging and 15A plug top & Remote Control MS Stand) with necessary ISEER Range (KWH/KWH) (4.0 2 Ton capacity & core cutting. to 4.49) 21 Supplying approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring etc with manufacturers calibration certificate 22 Supplying approved make panel mounting type Digital Ammeter having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC, erected on existing panel board with all connection, wiring ete with manufacturers calibration certificate 23 Supplying approved make Analog type moving iron C.T operated Ammeter A C Current suitable slide in scale 0-400 Amp. With 3 Nos. of Current Transformer erected on panel board with connections. 24 Providing L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with insulating materials connected to the meter 25 Supplying 42 micro farad capacitors for sodium vapour lamps 26 Supplying DIN rail for fixing MCB 27 Supplying 230V. A.C. to 110V. D.C. power pack for closing & tripping circuit common.. (for VCB) 28 Supplying Control Transformer for Electrical Panel HV side 415-0 V, LV Side 0V-8V-0V-10V-OV-24V 29 Supplying C&S Thermal overload relay - TC LRI-D63357
|
